Texas Instruments' new FlatLink(TM) transmitter offers first glueless connection to low-power embedded processors

LVDS serializer saves up to 83 percent board space and supports HD resolutions

DALLAS, Aug. 10 /PRNewswire/ -- Texas Instruments Incorporated (TI) (NYSE: TXN) today introduced the first LVDS serializer that connects directly to 1.8-V powered processors. Using TI's FlatLink((TM)) technology, the SN75LVDS83B eliminates the need for a costly level shifter when using 1.8-V and 2.5-V logic interfaces, lowering cost and reducing board space by up to 83 percent. The SN75LVDS83B supports 8-bit color and serializes RGB data. It then consolidates 24 data lines into one LVDS clock and four LVDS data pairs, which connect to LCD modules. For product details visit: www.ti.com/sn75lvds83b-pr.

The SN75LVDS83B supports applications such as netbooks, mobile Internet devices, digital picture frames and others where an LVDS link from a processor to the LCD module is required. The SN75LVDS83B supports a very broad pixel frequency range from 10 MHz up to high-definition (HD) screen resolutions of 135 MHz. The device is compatible with numerous processors, including OMAP35x applications processors and digital media processors based on TI's DaVinci((TM)) technology.

Key features and benefits

    --  Connects directly to any TTL level from 1.8 V to 3.3 V, eliminating the
        need for additional components
    --  Eliminates the level shifter, lowering cost by more than one dollar and
        reducing board space by up to 83 percent with the BGA package, and up to
        39 percent with the TSSOP package
    --  135-MHz pixel clock supports HD screen resolutions

Availability and pricing

The SN75LVDS83B is available now in a 56-pin TSSOP priced at $2.60, and a 56-ball BGA package priced at $2.80. The SN75LVDS83A is available in the 56-pin TSSOP package only. The SN75LVDS83A has a maximum frequency of 100 MHz, supports only 3.3-V input levels and is priced at $2.10. All prices are for quantities of 1,000 units.

Find out more about the SN75LVDS83B/A by visiting these links:

    --  SN75LVDS83B evaluation modules and samples: www.ti.com/sn75lvds83b-pr
    --  SN75LVDS83B video: www.ti.com/sn75lvds83b-prv
    --  Interface Selection Guide: www.ti.com/interface-pr
    --  TI's E2E online design community: http://www.ti.com/e2e-pr
    --  Follow TI on Twitter: www.twitter.com/txinstruments

About Texas Instruments

Texas Instruments (NYSE: TXN) helps customers solve problems and develop new electronics that make the world smarter, healthier, safer, greener and more fun. A global semiconductor company, TI innovates through manufacturing, design and sales operations in more than 30 countries. For more information, go to www.ti.com.

    Please refer all reader inquiries to:
    Texas Instruments Incorporated
    Semiconductor Group, SC-09017
    Literature Response Center
    14950 FAA Blvd.
    Fort Worth, TX  76155
    1-800-477-8924

Trademarks

DaVinci and FlatLink are registered trademarks of Texas Instruments. All other trademarks belong to their respective owners.

SOURCE Texas Instruments Incorporated

Web site: http://www.ti.com/




Review Article Be the first to review this article
SolidCAM: Program your CNCs directly inside your existing CAD system.


Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Siemens Goes ECAD With Mentor Graphics Acquisition
Jobs
Mechanical Engineer for IDEX Corporation at West Jordan,, UT
Senior Structural Engineer for Design Everest at San Francisco, CA
GIS Analyst II for Air Worldwide at Boston, MA
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise