Hitachi Implements 50-Million Gate Design Using Cadence Encounter Digital Implementation System

SAN JOSE, CA -- (MARKET WIRE) -- Jul 14, 2009 -- Cadence Design Systems, Inc. (NASDAQ: CDNS), the leader in global design innovation, announced today that Hitachi has fully implemented a chip design in excess of 50 million gates in just five weeks using the Cadence® Encounter® Digital Implementation (EDI) System.

When designing large-scale, multi-million gate devices, the overriding concern is turnaround time. The EDI System has the capacity to handle such large-scale designs using the flat implementation flow. Major improvements to the design infrastructure, such as multiprocessing and precise correlation throughout the integrated design environment from implementation to signoff have enabled both tremendous performance improvements and greatly enhanced quality of results.

"Today's LSI has clearly shifted to become large scaled due to the increased use of IP, while the market window has drastically narrowed," said Nobuo Tamba, Ph.D., general manager of the Design & Development Operation, Micro Device Division, Hitachi Ltd. "Hitachi is continuously aiming to provide the best-performance, best-quality products, so it is critical for Hitachi to shorten the design time for large-scale LSIs. We adopted the Cadence Encounter Digital Implementation System that brought us a remarkable design efficiency to complete 10 million gates per week. We strongly believe that such a short design turnaround time will be a significant advantage for our large-scale designs."

The EDI System's masterplan automatic floorplanner, high-speed prototyping floorplan verification, and multi-threaded processing at each stage were major contributors to the quick, five-week implementation of the 50-million-gate designs. Along with the EDI System, Encounter Timing System enabled Hitachi designers to quickly analyze and optimize timing for the large-scale design and lead to faster design closure with a significant gain in productivity. The parallel processing function in Cadence QRC Extraction contributed significantly to the turnaround time reduction at the signoff stage.

"The EDI System represents a new generation of implementation solutions with its fundamental new architecture and end-to-end multicore backplane to address the requirements of very large-scale designs. It also delivers a complete solution for low-power, mixed-signal, and advanced-node design, including full embedded electrical signoff and DFM," said Dr. Chi-Ping Hsu, senior vice president of research and development for the implementation group at Cadence. "We're very pleased to have assisted Hitachi in creating this complex, large-scale design, and this success is further evidence of Encounter enabling breakthrough results for our customers."

About Cadence

Cadence enables global electronic design innovation and plays an essential role in the creation of today's integrated circuits and electronics. Customers use Cadence software and hardware, methodologies, and services to design and verify advanced semiconductors, consumer electronics, networking and telecommunications equipment, and computer systems. The company is headquartered in San Jose, Calif., with sales offices, design centers, and research facilities around the world to serve the global electronics industry. More information about the company, its products, and services is available at

Cadence, the Cadence logoand Encounter are registered trademarks of Cadence Design Systems, Inc. in the United States and other countries. All other trademarks are the property of their respective owners.

Add to Digg Bookmark with Add to Newsvine

For more information, please contact:
Dan Holden
Cadence Design Systems, Inc.

Email Contact

Review Article Be the first to review this article
Featured Video
Director of Process Engineering. for Tekni-Plex at Toledo, Ohio
Mechanical Engineer for Allen & Shariff Corporation at Pittsburgh, Pennsylvania
Mid-Level Mechanical Engineer for Kiewit at lenexa, Kansas
System Designer/Engineer for Bluewater at Southfield, Michigan
GIS - Systems Analyst for City of Olathe at Olathe, Kansas
SENIOR GIS GAS SPECIALIST for James W. Sewall Company at , Any State in the USA
Upcoming Events
ESPRIT World 2018 at Indianapolis Marriott Downtown 350 West Maryland Street Indianapolis IN - Jun 11 - 15, 2018
HxGN LIVE 2018 at The Venetian Las Vegas NV - Jun 12 - 15, 2018
IMTS2018 International Manufacturing Tech Show at McCormick Place Chicago IL - Sep 10 - 15, 2018
4th International Conference on Sensors and Electronic Instrumentation Advances (SEIA' 2018) at Movenpick Hotel Amsterdam City Centre Amsterdam Netherlands - Sep 19 - 21, 2018
Kenesto: 30 day trial

Internet Business Systems © 2018 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise