Atmel Secures Portable Electronic Devices with Introduction of Low Power Cryptographic Battery Authentication IC with SHA-256

SRAM-based key storage ensures keys are permanently destroyed if IC is removed from battery

SAN JOSE, Calif., July 8 /PRNewswire-FirstCall/ -- Atmel(R) Corporation (NASDAQ: ATML) announced today its AT88SA100S ultra low-cost, cryptographic battery authentication IC for mobile-phones, cameras, portable power tools, and other battery-powered applications.

The AT88SA100S CrytpoAuthentication(TM) IC is the only battery authentication IC that uses a SHA-256 cryptographic engine and a 256-bit key that cannot be cracked using brute force methods. It is used to protect mobile phones, portable power tools, cameras, and other microcontroller-based products from counterfeit battery packs.

Counterfeit batteries are often less expensive than those provided by the original equipment manufacturer (OEM) because they often do not have appropriate protective mechanisms to prevent short circuits, abnormal heat or leakage, ignition, rupture and other malfunctions. They also are likely to lose their charge sooner and wear out more quickly than authentic battery packs. It is estimated that 75% of the replacement batteries sold are clones.

The AT88SA100S ensures replacement batteries meet the product manufacturer's standards by providing secure, reliable authentication that can be used to prevent product operation and/or charging with counterfeit product.

The AT88SA100S has 256-bits of SRAM for key storage, a guaranteed unique 48-bit serial number stored permanently inside the chip and 88 one-time, user-programmable fuses that can be used for the storage of battery parameters or status information. The 256-bit key is stored in the on-chip SRAM at the battery manufacturer's site and is powered by the battery pack itself. Physical attacks to retrieve the key are very difficult to effect because removing the CryptoAuthentication chip from the battery erases the SRAM memory, rendering the chip useless.

Challenge/response Authentication. Battery authentication is based on a "challenge/response" protocol between the microcontroller in the portable end-product (host) and the CrytpoAuthentication IC in the battery (client).

Easy System Integration. In order to speed system design, Atmel provides complete ARM(R)- and AVR(R)-compatible source code libraries that implement all necessary cryptographic modules for performing the host-side authentication capability. The AT88SA100S requires only a single GPIO pin on the host processor and only three wires on the connector to the battery, plus a standard bypass capacitor for a low overall BOM impact.

Pricing and Availability. The AT88SA100S battery authentication IC is available now in production quantities in a 1.3mm x 3mm, green-compliant (exceeds RoHS) 3-pin SOT-23 package. Priced at $0.65 in quantities of 1K units, it is 40% to 60% less expensive than any other battery-authentication IC on the market.

About Atmel. Atmel is a worldwide leader in the design and manufacture of microcontrollers, advanced logic, mixed-signal, nonvolatile memory and radio frequency (RF) components. Leveraging one of the industry's broadest intellectual property (IP) technology portfolios, Atmel is able to provide the electronics industry with complete system solutions focused on consumer, industrial, security, communications, computing and automotive markets.

(C) 2009 Atmel Corporation. All Rights Reserved. Atmel(R), Atmel logo and combinations thereof, AVR(R) and others, are registered trademarks, CryptoAuthentication(TM) and others are trademarks of Atmel Corporation or its subsidiaries. ARM(R) is a registered trademark of ARM Ltd. Other terms and product names may be trademarks of others.

    Information:
    For more information, visit www.atmel.com/products/cryptoauthentication

    Press Contacts:
    Sharon Harnisch, Marketing Communications
    Tel: +1 719 540-1723, Email: sharon.harnisch@atmel.com
    Helen Perlegos, Public Relations
    Tel: +1 408 487-2963, Email: Helen.perlegos@atmel.com

Web site: http://www.atmel.com/




Review Article Be the first to review this article

Autodesk University 2017

Featured Video
MCAD Corporate Newsletter
rss feed
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
NVIDIA’s AI Computer Drives AVs
Jobs
Senior Mechanical Engineer for Albert Kahn and Associates at Detroit, MI
Mechanical Engineer for The Planate Management Group LLC at Perry Point, MD
Structural Engineer for Albert Kahn and Associates at Detroit, MI
GIS Software Developer for UDC at Englewood, CO
GIS Analyst for G2 Partners LLC at San Ramon, CA
Upcoming Events
ASSESS 2017 CONGRESS at Bolger Center Potomac MD - Nov 1 - 3, 2017
FABTECH 2017 at McCormick Place Chicago IL - Nov 6 - 9, 2017
ATX MINNEAPOLIS 2017 at Minneapolis MN - Nov 8 - 9, 2017
2017 China Chongqing International Machine Tool Show (CCIMT) at Chongqing International Expo Center, Yubei Chongqing China - Nov 13 - 16, 2017
SolidCAM: SolidCARE



Internet Business Systems © 2017 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise