Cavium Networks Introduces Industry Leading Integrated ECONA ARM Processor for Small Form Factor Applications

MOUNTAIN VIEW, CA -- (MARKET WIRE) -- Jun 02, 2009 -- Cavium Networks (NASDAQ: CAVM), a leading provider of semiconductor products that enable intelligent processing for networking, communications, storage, wireless, video and security applications, today announced the introduction of the ECONA™ CNS2135 ARM SOC solution for small form factor and low power network and storage applications. The CNS2135 SOC solution will be used by manufacturers to build network and storage applications like Network Attached Storage (NAS) appliances and Internet download and streaming systems. Cavium Networks' CNS2135 and the related CNS2135-TK network module are on display at Cavium Networks' suite #1038 at Computex in Taipei, Taiwan from June 2 to June 5, 2009.

The CNS2135 is available as a stand-alone processor and in a network module form factor called the CNS2135-TK. The network module consists of a 2-layer PCB design with a small form factor of 74mm x 40mm x 19mm. The module hosts an ECONA CNS2135 ARM processor with embedded 4Mx16 Mbyte SDRAM, 1MByte Serial NOR flash, integrated Ethernet port and a USB 2.0 host connector in a ready-to-use compact dongle form factor. The module is available with ready-to-use software applications that provide FTP server, SAMBA server, Bit Torrent (BT) download, iTune server, uPNP AV and Printer Server functionality. The application software supports standard host Operating Systems including XP, Vista/Mac OSX/Linux (SAMBA) and FAT32 file system format for hard drives with up to 2TB capacity. The network module provides network storage performance with throughput up to 8 MByte with 4 unique FTP users / 4 unique Samba users with a total of 32 TCP simultaneous connections.

"The Cavium ECONA ARM processor family is being widely adopted in consumer networking access applications like network download stations, network IP cameras, Internet radios, 3G routers and home automation applications," said Steven Huang, General Manager, Connected Home & Office Group at Cavium Networks. "Our ECONA CNS2135-TK solution is a ready-to-use compact dongle module that enables quick and reliable implementation of innovative, easy to use network download stations with minimal development cost and time."

The CNS2135-TK network module offers the following features:

--  ECONA CNS2135 200MHz ARM9-based CPU
--  8MByte SDRAM, 1MB Serial NOR Flash
--  One LAN port with 10/100 Base-TX, Auto MDI/MDI-X with RJ45 connector
--  1 Port USB2.0/1.1 for mass storage / printer interface
--  Up to 8MByte storage read/write throughput
--  Major software including FTP server, samba server, BT download, media
    server & print server
--  74mm x 40mm x 19mm compact dongle form factor
    

Availability

The CNS2135-TK dongle module is available today. Production quantities will be available in Q3 2009. Please contact Cavium Networks for pricing.

About Cavium Networks

Cavium Networks is a leading provider of highly integrated semiconductor products that enable intelligent processing in networking, communications, storage, wireless, video and security applications. Cavium Networks offers a broad portfolio of integrated, software compatible processors ranging in performance from 10 Mbps to 20 Gbps that enable secure, intelligent functionality in enterprise, data-center, broadband/consumer and access & service provider equipment. Cavium Networks processors are supported by ecosystem partners that provide operating systems, tool support, reference designs and other services. Cavium Networks principal offices are in Mountain View, California with design team locations in California, Massachusetts, India and Taiwan. For more information, please visit: http://www.caviumnetworks.com.

ECONA is a Cavium Networks trademark. Other trademarks belong to their respective owners.

Cavium Networks Contact:
Angel Atondo
Marketing Manager
Tel: (650) 623-7033
Email: 
Email Contact





Review Article Be the first to review this article
SolidCAM: Program your CNCs directly inside your existing CAD system.


Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Re-Use Your CAD: The ModelCHECK Handbook
Jobs
Senior Structural Engineer for Design Everest at San Francisco, CA
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
GIS Analyst II for Air Worldwide at Boston, MA
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise