Texas Instruments delivers industry's most complete low-power RF solution for ZigBee(R)/IEEE 802.15.4, ZigBee RF4CE and smart energy

Best-in-class hardware, software, tools and support enable full system development

DALLAS, May 11 /PRNewswire/ -- Texas Instruments Incorporated (TI) (NYSE: TXN) today introduced a complete 2.4-GHz radio frequency (RF) system-on-chip solution supporting the IEEE 802.15.4 standard and an extensive set of applications, including ZigBee PRO networks, ZigBee RF4CE remote controls, smart energy, home and building automation, environmental monitoring and wireless medical. Unlike competing solutions, the CC2530 provides up to 256 KB of Flash memory to enable development of multiple network protocols, which TI supports with free, downloadable software and tools to ensure that customers have everything needed for complete system development. For more product information, see www.ti.com/cc2530-pr.

"The CC2530 solution is specifically tailored for emerging low-power RF applications that will enhance consumer's day-to-day lives, such as RF remote controls and audio/visual consumer electronics, efficient smart energy networks, advanced home automation and personal wireless medical devices," said Art George, senior vice president of TI's High-Performance Analog business unit. "The combination of best-in-class IEEE 802.15.4 system-on-chip with an unmatched suite of software and tools provides unlimited possibilities for next-generation low-power wireless networking systems."

Key features and benefits

    --  TI offers a variety of free protocol software stacks that are supported
        by the CC2530 to enable cost-optimized selection of network protocol
        based on system requirements:

        --  Z-Stack(TM) software for ZigBee-compliant applications (ZigBee PRO)
        --  RemoTI(TM) network protocol for ZigBee RF4CE remote control
        --  SimpliciTI(TM) network protocol for proprietary networking
    --  2x more Flash memory than closest competitor (256 KB) and extensive
        peripheral set (DMA, GPIO, USARTs, ADC, timers) supports wide range of
        applications and reduces bill-of-material cost
    --  Device integrates a leading RF transceiver with an industry-standard
        enhanced 8051 MCU, in-system programmable flash memory, 8-KB RAM and
        many other powerful features

-- Compatible devices from TI include the CC2590 and CC2591 2.4-GHz analog front ends (range extenders) and MSP430 ultra-low-power microcontrollers

Availability and pricing

The CC2530 is available now in a QFN-40 package and pricing starts at $3.25 in quantities of 1,000 units. Start your development today with a comprehensive demonstration kit that provides all the hardware and software necessary to evaluate the CC2530: basic development kit (CC2530DK), ZigBee development kit (CC2530ZDK), ZigBee RF4CE development kit (RemoTI-CC2530DK).

Find out more about TI's low-power RF portfolio at the links below:

    --  Order CC2530 development kits and samples:  www.ti.com/cc2530-pr
    --  TI's low-power RF portfolio and selection guide:  www.ti.com/lprf-pr
    --  TI's low-power RF E2E online community: www.ti.com/lprf-forum
    --  RemoTI network protocol for ZigBee RF4CE:  www.ti.com/rf4ce-pr

-- TI smart metering solutions: www.ti.com/metering

About Texas Instruments

Texas Instruments (NYSE: TXN) helps customers solve problems and develop new electronics that make the world smarter, healthier, safer, greener and more fun. A global semiconductor company, TI innovates through manufacturing, design and sales operations in more than 30 countries. For more information, go to www.ti.com

Please refer all reader inquiries to:

Texas Instruments Incorporated

Semiconductor Group, SC-09070

Literature Response Center

14950 FAA Blvd.

Fort Worth, TX 76155



Z-Stack, RemoTI and SimpliciTI are trademarks of Texas Instruments. ZigBee is a registered trademark of the ZigBee Alliance. All other trademarks belong to their respective owners.

Web site: http://www.ti.com/

Review Article Be the first to review this article


Featured Video
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
APSX Bringing Injection Molding To The Desktop
Inside Sales for SolidCAM at Newtown, PA
Director of Mechanical Engineering for Velodyne LIDAR at Morgan Hill, CA
Architect for North County Transit District at Oceanside, CA
Architetural Project Manager for DRA Architects at Irvine, CA
Sr. GIS Technical Analyst for Southern California Edison SCE Transmission and Distribution Organization at Rosemead, CA
Upcoming Events
DriveWorks World at The Barley Store Laskey Lane Thelwall Cheshire United Kingdom - Mar 6 - 9, 2017
JEC World 2017 at Paris Nord Villepinte Exhibition Centre Paris France - Mar 14 - 16, 2017
SOLIDWORKS funding event – Leicester at The National Space Centre, Exploration Dr, Leicester, LE4 5NS Leicester United Kingdom - Mar 17, 2017
ACE 2017 Nashville at Nashville TN - Mar 21 - 23, 2017

Internet Business Systems © 2017 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise