Ansoft Tools Couple With ANSYS For Real-World Simulation

SOUTHPOINTE, Pa. — (BUSINESS WIRE) — May 4, 2009 ANSYS, Inc. (NASDAQ: ANSS), a global innovator of simulation software and technologies designed to optimize product development processes, today announced a first milestone in coupling ANSYS® and Ansoft™ products, successfully performing multiphysics simulations that involve electromagnetic applications. As electronics become more embedded into automotive, aerospace, industrial and consumer products, engineers must consider factors such as circuitry’s ability to withstand vibration shocks, heat generation and electromagnetic interference. The combined depth and breadth of solutions from ANSYS is key to solving problems that involve these complex systems. In performing several case studies, ANSYS engineers deployed the electromagnetic effects determined by Ansoft software directly in ANSYS thermal and structural simulation. Work is ongoing to fully integrate Ansoft software directly into the ANSYS® Workbench platform for future bidirectional and seamless operation.

For example, a high-power electronic connector used in a military radar application to connect a transmitter to an antenna must be engineered from electromagnetic, thermal and structural perspectives to ensure success. The simulation was performed by coupling Ansoft’s HFSS software with the ANSYS Workbench environment, using advanced thermal and structural capabilities. Engineers used HFSS to ensure that the device was transmitting in the proper path, by calculating the high-frequency electromagnetic fields, power loss density distribution and S-parameters. In such high-power applications, it is critical to determine the temperature distribution to ensure the device stays below temperatures that cause material failure, such as melting. The power loss density results from the HFSS simulation were used as the source for the thermal simulation performed within ANSYS® Mechanical software, which simulated the temperature distribution of the device.

“Such coupling will allow engineers to integrate complex electronic designs at component, circuit and system levels, upfront in the design cycle, where changes can be incorporated quicker and more cost effectively. This is just the first step. We’re now working to directly couple the Ansoft products with the rest of the ANSYS suite,” said Zol Cendes, chief technology officer and general manager at Ansoft. “The full integration of ANSYS mechanical/thermal/fluid tools with world-class Ansoft electronic design automation software — directly coupled for interactive use within the ANSYS Workbench environment — will allow users to perform closely coupled multiphysics simulations. We believe this integration process is critical to enabling the transition to a mechatronic design methodology that allows customers to view design problems in a new and improved paradigm. This technology will allow organizations to develop leading-edge products that can withstand rigorous usage in the real world.”

In another case, a valve-actuating solenoid application used a coupled ANSYS and Ansoft simulation to analyze temperature distribution. Solenoids are commonly found in automotive starter systems, home appliances, industrial air hammers and other devices that rely on a sudden burst of power to move a specific part. Maxwell® software was used to calculate the power loss from the low-frequency electromagnetic fields within the solenoid. The power loss was used as an input for a thermal simulation performed with ANSYS Mechanical software to determine the temperature profile of the device. Subsequently, the application predicted how the device deformed due to the rise in temperature. Such coupling delivers a powerful analysis framework needed to solve these complex, interrelated physics problems. Thus, engineers soon will be able to address electro-thermal-stress problems associated with optimizing state-of-the-art radio frequency (RF) and electromechanical components including antennas, actuators, power converters and printed circuit boards (PCBs).

The coupling of ANSYS and Ansoft tools also will provide users with a significantly broader simulation environment. “Take, for example, a wind power application,” continued Cendes. “ANSYS has excelled in helping companies optimize blade design, in terms of structural integrity of the blade, with mechanical software. Our tools also help ensure that the design efficiently captures the kinetic energy from the wind, using ANSYS fluid flow products. With the addition of the Ansoft technology, we can expand our solution to help users design the electric generators that convert the wind’s kinetic energy into electrical energy. We also can help design the power conversion, transmission and electronic control that transform the electrical energy into a usable form to deliver it to the electrical power grid. The ultimate benefit is that users can rely on ANSYS as a single source for world-class design software, technical support and services for the design of complete systems. The ANSYS breadth of engineering solutions and depth of multiphysics technologies gives customers the tools they need to succeed in today’s ultra-competitive environment.”

For downloadable images, visit http://www.ansys.com/newsimages.

About ANSYS, Inc.

ANSYS, Inc., founded in 1970, develops and globally markets engineering simulation software and technologies widely used by engineers and designers across a broad spectrum of industries. The Company focuses on the development of open and flexible solutions that enable users to analyze designs directly on the desktop, providing a common platform for fast, efficient and cost-conscious product development, from design concept to final-stage testing and validation. The Company and its global network of channel partners provide sales, support and training for customers. Headquartered in Canonsburg, Pennsylvania, U.S.A., with more than 60 strategic sales locations throughout the world, ANSYS, Inc. and its subsidiaries employ approximately 1,700 people and distribute ANSYS products through a network of channel partners in over 40 countries. Visit www.ansys.com for more information.

1 | 2  Next Page »



Review Article Be the first to review this article

Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Re-Use Your CAD: The ModelCHECK Handbook
Jobs
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
GIS Analyst II for Air Worldwide at Boston, MA
Senior Structural Engineer for Design Everest at San Francisco, CA
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017
SolidCAM: Program your CNCs directly inside your existing CAD system.



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise