Texas Instruments expands its precision timing portfolio with industry's most highly integrated clock generator family

Compact clocking solutions save up to 50 percent board space

DALLAS, April 23 /PRNewswire/ -- Texas Instruments Incorporated (TI) (NYSE: TXN) today introduced three new precision clock generators that have a crystal input, replacing up to four discrete high-frequency crystal oscillators with a single device. These devices provide a more cost-efficient solution that saves up to 50 percent more board space than competing solutions today. The CDCM61004 family improves system performance by achieving integrated RMS jitter of 500 fs, well suited for data communications equipment. For product details and to order samples see: www.ti.com/cdcm61004-pr.

The CDCM61004 family eases board design by providing a fully integrated voltage-controlled oscillator (VCO) support for a wide output frequency range from 43.75 MHz to 683 MHz, allowing one device to cover multiple standards or multiple designs. The clock generators operate at less than 500 mW to enable high-density designs, offering up to 30 percent power savings.

Key Features

    --  Input reference including the commonly used crystal frequencies such as
        24.8832 MHz, 25 MHz, and 26.5625 MHz
    --  On-chip VCO operates in frequency range 1.75 GHz to 2.05 GHz, supporting
        output from 43.75 MHz to 683 MHz
    --  Input crystal bypass mode allows direct tuning on the reference
    --  Output selectable between LVPECL, LVDS or 2-LVCMOS

Key Benefits

    --  Pin-compatible family allows the same hardware strapping
    --  High integration and flexible I/O minimizes the number of components
    --  Reduces board space and provides a cost-efficient solution
    --  Low jitter improves overall system bit error rate performance
    --  Low power enables high-density designs

Availability and pricing

The CDCM61004 family is available now in volume production in a QFN-32 package. The CDCM61004 has four LVPECL/LVDS or eight LVCMOS outputs and is priced at $8.15. The CDCM61002 has two LVPECL/LVDS or four LVCMOS outputs and is priced at $6.25. The CDCM61001 has one LVPECL/LVDS or two LVCMOS outputs and is priced at $5.25. All pricing is in quantities of 100 units.

Find out more about TI's clock portfolio by visiting the links below:

    --  Order CDCM6100x evaluation modules and samples: www.ti.com/cdcm61004-pr
    --  Watch CDCM6100x informational video: www.ti.com/cdcm61004video
    --  See TI's complete clocks and timing portfolio:  http://clocks.ti.com

-- Get questions answered on TI's E2E online community: www.community.ti.com

About Texas Instruments

Texas Instruments (NYSE: TXN) helps customers solve problems and develop new electronics that make the world smarter, healthier, safer, greener and more fun. A global semiconductor company, TI innovates through manufacturing, design and sales operations in more than 25 countries. For more information, go to www.ti.com

    Please refer all reader inquiries to:
    Texas Instruments Incorporated
    Semiconductor Group, SC-09050
    Literature Response Center
    14950 FAA Blvd.
    Fort Worth, TX  76155
    1-800-477-8924

Trademarks

All registered trademarks and other trademarks belong to their respective owners.

Web site: http://www.ti.com/




Review Article Be the first to review this article
SolidCAM: Program your CNCs directly inside your existing CAD system.


Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Siemens Goes ECAD With Mentor Graphics Acquisition
Jobs
Mechanical Engineer for IDEX Corporation at West Jordan,, UT
GIS Analyst II for Air Worldwide at Boston, MA
Senior Structural Engineer for Design Everest at San Francisco, CA
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise