NAVTEQ Reports Annual Fuel Savings Resulting From Navigation System Use

Study shows drivers could save over euro 400 in fuel costs per year

CHICAGO, April 22 /PRNewswire/ -- NAVTEQ, the leading global provider of digital map, traffic and location data for in-vehicle, portable, wireless and enterprise solutions, has revealed the results of a proprietary research study designed to assess the consumer impact of everyday use of navigation devices. Previous studies in this field focused more on "getting lost" scenarios versus the benefits to drivers of navigation system use during the course of their normal driving habits.

(Photo: http://www.newscom.com/cgi-bin/prnh/20090422/CG02696)

(Photo: http://www.newscom.com/cgi-bin/prnh/20090422/CG02649-b)

(Photo: http://www.newscom.com/cgi-bin/prnh/20090422/CG02649-c)

In a three pronged study which evaluated drivers without a navigation system, drivers with a navigation system, and drivers with a navigation system that included traffic, the results revealed that the drivers using navigation devices 1) drove shorter distances and 2) spent less time driving. Conducted in two metropolitan areas of Germany - Dusseldorf and Munich - the study also showed that drivers with navigation devices had a 12% increase in fuel efficiency, as measured by liters of fuel consumed per 100 kms. Fuel consumption among those drivers using navigation fell from 8.3 to 7.3 l/100kms. When the study results are annualized, they equate to a nearly 2500 kilometer drop in distance driven per year per driver, and an average of euro 416 in savings on fuel annually per driver.

The participants, who had not previously owned a navigation device, had their vehicles outfitted with a logging device which was used to track the route they drove and their driving speed. The study results reflect more than 2,100 individual trips, more than 20,000 kilometers and almost 500 hours on the road.

The study was conducted by NuStats, a social science research firm that over the past 25 years has established itself as a leader in population surveys and qualitative research pertaining to transportation in general, and personal mobility and transit use in particular.

The findings also revealed additional areas of learning:

    --  Reductions in trip times and distance driven increased over time: There
        was a marked "learning curve" with the use of navigation
        devices; greater decreases in trip times and distance driven were seen
        in the latter half of the study.
    --  The addition of traffic information further reduced trip times and
        distance driven:  The largest reductions were seen with participants
        using a navigation device with traffic during peak travel times (7:00 -
        8:59 AM; 4:00 - 6:59 PM).

-- Greater reductions were seen during non-routine trips: When traveling a route other than what was customarily traveled, the reductions in trip times and lengths were also higher.

"With the robust methodology behind this study, we have confidence that these results are representative of a trend that globally has often been implied, but not previously proven in the realm of everyday use. Consumers can enjoy the advantages of navigation not only in relation to a more positive driving experience, but also in terms of the positive impact it can have on their wallets," says Judson Green, president and chief executive officer, NAVTEQ.

About NAVTEQ

NAVTEQ is the leading global provider of digital map, traffic and location data that enables navigation and location-based platforms around the world. NAVTEQ supplies comprehensive digital map information to power automotive navigation systems, portable and wireless devices, Internet-based mapping applications and government and business solutions. The Chicago-based company was founded in 1985 and has approximately 4,000 employees located in 196 offices and in 36 countries.

NAVTEQ is a trademark in the U.S. and other countries. All rights reserved.

(Logo: http://www.newscom.com/cgi-bin/prnh/20060313/NAVTEQLOGO)

Web site: http://www.navteq.com/




Review Article Be the first to review this article
SolidCAM: Program your CNCs directly inside your existing CAD system.


Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Re-Use Your CAD: The ModelCHECK Handbook
Jobs
GIS Analyst II for Air Worldwide at Boston, MA
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
Senior Structural Engineer for Design Everest at San Francisco, CA
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise