National Semiconductor Introduces Industry's Lowest Jitter 3-Gbps SDI Equalizer

PowerWise Cable Equalizer Guarantees Lowest Max Jitter Across Cable Lengths

LAS VEGAS, April 20 /PRNewswire-FirstCall/ -- NATIONAL ASSOCIATION OF BROADCASTERS -- A new PowerWise(R) 3-Gbps (3G) serial digital interface (SDI) cable equalizer (EQ) from National Semiconductor Corp. (NYSE: NSM) simplifies the design of broadcast video routers, production switchers, distribution amplifiers, editing and conversion equipment. The energy-saving LMH0384 offers the industry's lowest output alignment jitter across cable lengths allowing hardware designers more headroom for designing within system jitter budgets. Tighter jitter budgets translate to cleaner system design, fewer bit errors and crisper images.

The LMH0384 is the only EQ to guarantee less than 0.3 unit intervals (UI) of output jitter from zero to 110m of Belden 1694A coaxial cable at 2.97-Gbps. It equalizes up to 140m of cable at 3G rates, 200m at high-definition (HD) rates and 400m at standard-definition (SD) rates. The device adaptively adjusts equalization levels based on cable length to receive incoming signals and provide low-jitter transmission of 1080p high-definition (HD) broadcast video at up to 60 frames per second over a single coaxial cable. National will demonstrate the LMH0384 at the NAB show in Las Vegas from April 20-24 at Booth SU2804.

National's LMH0384 supports two modes of operation: pin mode and register mode. In pin mode, the EQ is fully backward-compatible with National's other SDI equalizers. Register mode opens up a suite of advanced features -- accessible via serial peripheral interface (SPI) bus -- that enable flexibility to change and diagnose product parameters without requiring a board re-spin. These include automatic power down (auto-sleep), cable length indicator, LVDS drivers with programmable offset and amplitude, and programmable input launch amplitude to facilitate operation with external splitters. The LMH0384's 1.05V to 1.85V adjustable output common-mode voltage eliminates the need for level-translation buffers by facilitating direct coupling to most field-programmable gate arrays (FPGAs) and signal conditioning devices.

The EQ offers active sensing features to minimize power consumption and reduce cooling requirements in customer systems. For example, in the event of cable detachment or loss of signal, the LMH0384 enters a power-saving auto sleep mode to reduce power consumption by 85 percent. In active mode, the EQ automatically shifts equalization stages at shorter cable lengths (less than 140m) to reduce power consumption by 20 percent. The EQ typically consumes 230 mW of power from a single 3.3V supply.

The LMH0384 is a part of National's broadcast video portfolio that enables Society of Motion Picture and Television Engineers (SMPTE) 424M, SMPTE 292M and SMPTE 259M uncompressed serial digital video routing and processing applications. The LMH0384 also fully supports the digital video broadcasting-asynchronous serial interface (DVB-ASI) standard at 270 Mbps for compressed video distribution in head-end equipment.

Pricing and Availability

Offered in a 16-LLP(R) package, the LMH0384 is priced at $21 each in 100-unit quantities. The LMH0384 is sampling now, with production quantities scheduled for May 2009. For more information, or to order samples and an evaluation board, visit www.national.com/pf/LM/LMH0384.html.

Solutions Supporting Video Systems

National's high-performance, energy-efficient analog technology can help video engineers differentiate their products. National provides the key functions every system engineer requires, including operational amplifiers, power management, data conversion, interface and serial digital video products, audio subsystems, display ICs and networking products.

About National Semiconductor

National Semiconductor creates energy-efficient analog and mixed-signal semiconductors. Its PowerWise(R) products enable systems that consume less power, extend battery life and generate less heat. Headquartered in Santa Clara, Calif., National reported sales of $1.89 billion for fiscal 2008 which ended May 25, 2008. Additional company and product information is available at www.national.com.

PowerWise is a registered trademark of National Semiconductor Corporation. All other brand or product names are trademarks or registered trademarks of their respective holders.

    Media Contact
    Mark Alden
    National Semiconductor
    (408) 721-6929
    mark.alden@nsc.com

    Reader Information
    Design Support Group
    (800) 272-9959
    World Wide Web
    www.national.com

Web site: http://www.national.com/




Review Article Be the first to review this article
HP

ACE2017

Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Major Autodesk Disruption: Carl Bass Resigns
Jobs
Inside Sales for SolidCAM at Newtown, PA
Director of Mechanical Engineering for Velodyne LIDAR at Morgan Hill, CA
Architetural Project Manager for DRA Architects at Irvine, CA
Architect for North County Transit District at Oceanside, CA
Sr. GIS Technical Analyst for Southern California Edison SCE Transmission and Distribution Organization at Rosemead, CA
Upcoming Events
SOLIDWORKS 2017 Launch Event – Dudley at The Conference Hub, Dudley College of Technology, DY1 4AS Dudley United Kingdom - Feb 22, 2017
JEC World 2017 at Paris Nord Villepinte Exhibition Centre Paris France - Mar 14 - 16, 2017
SOLIDWORKS funding event – Leicester at The National Space Centre, Exploration Dr, Leicester, LE4 5NS Leicester United Kingdom - Mar 17, 2017
ACE 2017 Nashville at Nashville TN - Mar 21 - 23, 2017



Internet Business Systems © 2017 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise