LSI Introduces Ultramapper II SoC for Higher-Quality, Lower-Cost Multi-service Network Applications

Fourth-generation solution provides intelligent QoS and advanced feature set at half the power consumption

MILPITAS, Calif., Feb. 10 /PRNewswire-FirstCall/ -- LSI Corporation (NYSE: LSI) today announced Ultramapper(TM) II, a significant addition to the LSI(TM) networking family of multi-service processors for radio network controllers, base station controllers and customer premise equipment (CPE) applications. The Ultramapper II system-on-chip (SoC) provides a high-performance, multi- channel bridge from network cores to metro access networks, enhances quality of service (QoS) and cuts the operating costs of any-to-any networks.

"Despite the downturn in the global economy, demand for high-speed, high- quality network transport will continue to grow," said Aileen Arcilla, senior analyst for Semiconductors at IDC. "Today's wireline and wireless networks require low-power, highly integrated solutions that will ensure high- performance transport, particularly for the anticipated increase in video traffic."

Optimum network performance is achievable only if QoS can be measured in both directions on each active channel. Built for wireless and wireline transport applications, Ultramapper II has the power and the intelligence to deliver concurrent, real-time QoS data to service providers across every channel in the network. Featuring higher port density and lower power consumption than the previous generation, its capabilities include ultra-fast, state-of-the-art network error detection, fault isolation and remote repair capabilities at reduced cost per port.

"This device reinforces LSI's leadership in wireless and wireline processor technology," said Shane Gunning, product line director, Networking Components Division, LSI. "Compared to the previous generation, the new Ultramapper II provides customers with increased performance and additional features at half the power consumption."

Compatible with other SoCs in the Ultramapper family and scalable across the bandwidth spectrum from DS0 (64 kb/s) to OC-3 (155.52 Mbs), Ultramapper II enables OEMs to leverage one design effort across their complete line of network platforms. Standard, carrier-grade features include 4 x OC-3 protection for Advanced Telecom Computing Architecture (ATCA) applications, 12 x DS3/E3/EC1 terminations, protection switching, full DS3 PMON on all twelve channels, STS3c/STM-1C capability and simplified clocking.

Ultramapper II is expected to be available in sample quantities this quarter. Production quantities are expected to be available in April.

LSI will showcase its wireless infrastructure solutions in stand AV53 at the GSMA Mobile World Congress in Barcelona, Spain, February 16 to 19. The LSI stand will be located in the Avenue Pavilion near Hall 8 of the exhibition.

About LSI

LSI Corporation (NYSE: LSI) is a leading provider of innovative silicon, systems and software technologies that enable products which seamlessly bring people, information and digital content together. The company offers a broad portfolio of capabilities and services including custom and standard product ICs, adapters, systems and software that are trusted by the world's best known brands to power leading solutions in the Storage and Networking markets. More information is available at http://www.lsi.com.

    Editor's Notes:
    1. All LSI news releases (financial, acquisitions, manufacturing, products,
       technology, etc.) are issued exclusively by PR Newswire and are
       immediately thereafter posted on the company's external website,
       
www.lsi.com     2. LSI, the LSI logo design and Ultramapper are trademarks or registered
       trademarks of LSI Corporation.
    3. All other brand or product names may be trademarks or registered
       trademarks of their respective companies.

Web site: http://www.lsi.com/




Review Article Be the first to review this article

Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Siemens Goes ECAD With Mentor Graphics Acquisition
Jobs
Mechanical Engineer for IDEX Corporation at West Jordan,, UT
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
Senior Structural Engineer for Design Everest at San Francisco, CA
GIS Analyst II for Air Worldwide at Boston, MA
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017
SolidCAM: Program your CNCs directly inside your existing CAD system.



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise