"Delphi's Power Pack Connection Systems, which encompass the new Power Pack 1000 and existing Power Pack 2000 series, are among the most comprehensive and versatile high-current/high-power connection systems in the industry," boasts Don Bizon, Delphi Connection Systems product manager. "Delphi Power Pack's unique feature is its ability to provide a sealed connection system that mates in the in-line or right-angle direction to provide original equipment manufacturers a routing advantage for large-gage cables." This mating direction is managed through the two-piece design of the female terminal. The female terminal has multiple contact points and uses beryllium copper with silver plating to manage the heat generated in high-current applications.
Power Pack 1000 can accommodate up to 145 amps and a cable range of 6mm2 to 25mm2. Power Pack 2000 can accommodate up to 250 amps and a cable range of 13mm2 to 62mm2. The operating temperature range of the Power Pack portfolio is -40°C to 150°C.
The Power Pack connection systems are easily engaged and disengaged by hand, which provides assembly plants the opportunity to save on labor costs associated with tools and fasteners used for creating the connection, Bizon notes. In addition, the sealing capability provides environmental protection and the ability to mate directly to sealed high-current modules.
"Delphi's Power Pack portfolio meets the product requirements for a number of markets -- passenger car, commercial and off-road vehicles, and industrial applications. Its high-voltage, high-current capability combined with its sealed-system configuration also make Power Pack a strong candidate for automakers' hybrid vehicle programs," Bizon adds. "The special needs of each of these markets were defined in the product development phase, and the result is an innovative and cost-effective product that meets the toughest customer specifications." This makes Power Pack ideal for use in applications such as sealed electrical centers, electric power steering modules, front wall power pass-through, battery cable in-line connections and hybrid vehicle modules.
For more information about Delphi's Power Pack portfolio, visit www.delphi.com/powerpack.
Delphi Electrical/Electronic Architecture delivers power and signal distribution networks for today's increasingly complex vehicles. Delphi engineers act as master architects by using proprietary design tools and software to create a virtual model of a vehicle's E/E architecture -- down to the last connector, electrical center, electronic module and wiring harness. In doing so, they evaluate the impact of various trade-offs to deliver a fully optimized E/E architecture system backed by Delphi technical centers and manufacturing facilities in 31 countries around the globe.
For more information about Delphi Corp., visit http://delphi.com/about/news/media/.
This press release as well as other statements made by Delphi may contain forward-looking statements that reflect, when made, the Company's current views with respect to current events and financial performance. Such forward-looking statements are and will be, as the case may be, subject to many risks, uncertainties and factors relating to the Company's operations and business environment which may cause the actual results of the Company to be materially different from any future results, express or implied, by such forward-looking statements. In some cases, you can identify these statements by forward-looking words such as "may," "might," "will," "should," "expects," "plans," "anticipates," "believes," "estimates," "predicts," "potential" or "continue," the negative of these terms and other comparable terminology. Factors that could cause actual results to differ materially from these forward-looking statements include, but are not limited to, the following: the ability of the Company to continue as a going concern; the ability of the Company to operate pursuant to the terms of the debtor-in-possession financing facility and its advance agreement with GM, to obtain an extension of term or other amendments as necessary to maintain access to such facility and advance agreement; the Company's ability to obtain Court approval with respect to motions in the chapter 11 cases prosecuted by it from time to time; the ability of the Company to achieve all of the conditions to the effectiveness of those portions of the Amended and Restated Global Settlement Agreement and Amended and Restated Master Restructuring Agreement with General Motors which are contingent on Delphi's emergence from chapter 11; the ability of the Company to obtain court approval to modify its amended plan of reorganization which was confirmed by the Court on January 25, 2008 as set forth in its filing on October 3, 2008 and to confirm such modified plan or any subsequent modifications to the confirmed plan or any other subsequently confirmed plan of reorganization and to consummate such plan; risks associated with third parties seeking and obtaining Court approval to terminate or shorten the exclusivity period for the Company to propose and confirm one or more plans of reorganization, for the appointment of a chapter 11 trustee or to convert the cases to chapter 7 cases; the ability of the Company to obtain and maintain normal terms with vendors and service providers; the Company's ability to maintain contracts that are critical to its operations; the potential adverse impact of the chapter 11 cases on the Company's liquidity or results of operations; the ability of the Company to fund and execute its business plan as described in the proposed modifications to its plan of reorganization as filed with the court and to do so in a timely manner; the ability of the Company to attract, motivate and/or retain key executives and associates; the ability of the Company to avoid or continue to operate during a strike, or partial work stoppage or slow down by any of its unionized employees or those of its principal customers and the ability of the Company to attract and retain customers. Additional factors that could affect future results are identified in the Annual Report on Form 10-K for the year ended December 31, 2007 filed with the SEC, including the risk factors in Part I. Item 1A. Risk Factors, contained therein, and the Company's quarterly periodic reports for the subsequent periods, including the risk factors in Part II. Item 1A. Risk Factors, contained therein, filed with the SEC. Delphi disclaims any intention or obligation to update or revise any forward-looking statements, whether as a result of new information, future events and/or otherwise. Similarly, these and other factors, including the terms of any reorganization plan ultimately confirmed, can affect the value of the Company's various prepetition liabilities, common stock and/or other equity securities.
Image Available: http://www2.marketwire.com/mw/frame_mw?attachid=871398
Image Available: http://www2.marketwire.com/mw/frame_mw?attachid=871404
CONTACT: Maraline Kubik (U.S.) 330.373.5682 Email Contact Thomas Aurich (Germany) 0202-291-2115 Email Contact