Denali Software Premieres Verification IP for the New SuperSpeed USB Interface

USB 3.0 Design and Verification Teams to Benefit from Pre-silicon Compliance and Interoperability Verification IP

SUNNYVALE, Calif., Nov. 10 /PRNewswire/ -- Denali Software, Inc., a world-leading provider of electronic design automation (EDA) software and intellectual property (IP), today announced that its PureSpec(TM) verification intellectual property (VIP) product now supports the USB 3.0 specification from the USB 3.0 Promoter Group, allowing device and system designers to begin advanced USB 3.0 development. Denali's PureSpec USB VIP product provides both design and verification engineers with a high-quality solution for modeling, simulating, and verifying designs that utilize the latest USB interface specification, enabling them to accelerate the design and verification of USB devices and systems.

"Denali has been a long-time supporter of USB technology and provider of verification IP solutions," said Jeff Ravencraft, USB-IF president and chairman. "We are pleased to see this announcement from Denali, supporting the USB 3.0 specification, as it will help developers bring SuperSpeed USB products to market quickly and support compliance to the USB 3.0 specification with their USB VIP solutions."

Denali's PureSpec VIP software for the USB interface supports the next-generation USB technology and specification as it continues to evolve. The USB 3.0 specification offers over 10x performance improvement and is fully backwards compatible with USB 2.0.

"Our customers are thrilled that we have enabled USB VIP for the next generation of USB, and thus can leverage Denali's tools, experience and support with PCI Express and USB 2.0 to take advantage of the new SuperSpeed USB protocol," states Sanjiv Kumar, director, Verification Products at Denali Software. "Our verification IP products not only support the next-generation interface requirements for design and verification of SuperSpeed USB devices and systems, but accelerate our customers' design cycles time to market."

About PureSpec USB 3.0 Verification IP

Denali's PureSpec is the most widely-used verification IP product for verifying compliance and compatibility of USB designs. All PureSpec products are directly integrated into all popular EDA languages and verification environments including: Verilog, SystemVerilog, VHDL, C/C++, SystemC, 'e', OpenVERA. Quality, completeness and seamless integration with all modern verification environments, e.g., OVM, VMM, eRM, etc., make PureSpec the solution of choice for functional verification and interoperability validation of USB designs. A solid product platform, dedicated customer support, and unmatched EDA modeling and verification expertise make PureSpec USB the best-in-class verification IP solution. For more information about PureSpec USB, visit: http://www.denali.com/usb3.

About Denali Software

Denali Software, Inc., is a world-leading provider of electronic design automation (EDA) software and intellectual property (IP) for system-on-chip (SoC) design and verification. Denali delivers the industry's most trusted solutions for deploying PCI Express, NAND Flash and DDR DRAM subsystems. Developers use Denali's EDA, IP and services to reduce risk and speed time-to-market for electronic system and chip design. Denali is headquartered in Sunnyvale, California and has offices around the world to serve the global electronics industry. More information about Denali, its products and services is available at http://www.denali.com.

Denali and Denali Software are registered trademarks of Denali Software, Inc. PureSpec is a trademarks of Denali Software, Inc. All other trademarks are of their respective owners.

     Editorial contact:
     Pierre Golde
     Denali Software, Inc.
     (408) 743-4262
     pgolde@denali.com

Web site: http://www.denali.com/




Review Article Be the first to review this article
SolidCAM: Program your CNCs directly inside your existing CAD system.


Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Siemens Goes ECAD With Mentor Graphics Acquisition
Jobs
Mechanical Engineer for IDEX Corporation at West Jordan,, UT
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
GIS Analyst II for Air Worldwide at Boston, MA
Senior Structural Engineer for Design Everest at San Francisco, CA
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise