congatec Unveils Latest Module in COM Express Family Based On Intel(R) Atom(TM) Processor N270 and Mobile Intel(R) 945GSE Express Chipset

DEGGENDORF, Germany—(BUSINESS WIRE)—September 25, 2008— congatec AG continues to enhance its highly successful COM Express product family with the unveiling of the economically priced conga-CA945 module. The new module features the Intel® Atom processor N270 and the full-featured Mobile Intel® 945GSE Express chipset in conjunction with the Intel® I/O Controller Hub 7-M. (Photo available at:

The complete design of this compact (95x95mm) COM Express module delivers excellent performance-per-watt at optimized price levels. The total thermal design power (TDP) of the processor/chipset combination is only 8 Watts, making applications that typically require less than 5 Watts ideal for this module. Combining this low power consumption with ACPI 3.0 battery management also provides the ability to create fully-featured mobile embedded applications.

The conga-CA945 supports three PCI Express Lanes, eight USB 2.0 ports, two serial ATA, two Express Cards, one IDE Interface and Intel® High Definition Audio. Additionally, it features a 32-Bit PCI bus, multi master I2C bus, LPC bus, fan control and Gigabit Ethernet. A DDR2 SODIMM socket allows for flexible memory configuration up to 2 GBytes in size.

The conga-CA945 is powered by the 45nm Intel Atom processor N270 that is equipped with 512 kByte L2 cache. It operates at 1.6 GHz clock speed and utilizes a 533 MHz front side bus. Thanks to the Intel® Speedstep® Technology, this robust performing CPU will rarely reach its maximum power consumption value of 2.5 Watts when used in real-life applications. The Intel Atom processor N270 includes 2-Threads support in order to allow for virtualization. The conga-CA945 acts like a dual-core system and can independently operate two operating systems simultaneously.

The Intel® Graphics Media Accelerator 950, which is integrated within the Mobile Intel 945GSE Express chipset, allows for more than 10 GB/s bandwidth to a maximum of 224 MByte video memory allocation to provide power-efficient 32-bit 3D graphics. Both independent graphic pipelines can use either dual-channel LVDS, single SDVO or analog VGA. The conga-CA945 implements the Embedded Panel Interface (EPI) and the VESA DisplayID standard allowing for automatic recognition of the attached flat panel display.

All congatec modules are equipped with an embedded BIOS and a board controller that enhance embedded features such as system monitoring, watchdog timer and the I2C bus. With the ability to isolate itself from the main x86 processor, these features are also made available in stand-by mode, hence promoting further power saving functionality. In addition to enhanced power management, the congatec Embedded BIOS supports ACPI 3.0 with battery management.

Pricing and Availability

Priced at $290 (US list +tax), first samples of the conga-CA945 will be available at the end of November 2008.

About congatec AG

Based in Deggendorf Germany, congatec AG ( is an innovative and experienced manufacturer of COM Express, XTX and ETX embedded computer boards, with more than 200-manpower years of experience in the fast growing embedded computer industry. The companys objective is to engineer and market industrial computer modules based on standard form factors, including an embedded BIOS, excellent driver support as well as full-featured board support packages. Customers receive complete product lifecycle support starting early during the design-in stage. All congatec products are manufactured by specialised contract manufacturers who fulfil the latest quality standards.

Intel and Intel Atom are trademarks of Intel Corporation in the U.S. and other countries.


Reader Contact:
congatec US
Ron Mazza, 760-635-2602
Email Contact
Press Contacts:
HighPointe Communications
Wendy Truax, 503-351-0103
Email Contact
PRismaPR (Europe)
Bettina Lerchenmüller, +49-8106-24 72 33
Email Contact


Review Article Be the first to review this article
Autodesk - DelCAM

Featured Video
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Apple Adding To Computer Product Line Minus Ports
Currently No Featured Jobs
Upcoming Events
3D Collaboration & Interoperability Congress at 1310 Washington Ave. Golden CO - Oct 25 - 26, 2016
Electric&Hybrid Aerospace Technology Symposium 2016 at Conference Centre East. Koelnmesse (East Entrance) Messeplatz 1 Cologne Germany - Nov 9 - 10, 2016
Autodesk University Las Vegas at Las Vegas NV - Nov 15 - 17, 2016
SolidCAM: Program your CNCs directly inside your existing CAD system.
TurboCAD pro : Limited Time offer

Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise