Intellitech ships new multi-voltage JTAG multiplexer to compete with IEEE 1149.1 linking devices from Texas Instruments and National Semiconductor

DURHAM, N.H.—(BUSINESS WIRE)—September 22, 2008— Intellitech Corporation, www.intellitech.com, the leader in lowering electronic product costs through IEEE 1149.1/JTAG, has announced that it has shipped a new multi-voltage eight ring JTAG multiplexer called the Scan Ring Linker in a 16mm x 16mm VQ100 package to early adopters. The SRL lowers PCB costs and reduces engineering design time by eliminating pull-up/pull-down resistors, buffer ICs and voltage translators needed for designing and routing JTAG rings in complex PCBs and Systems, especially those with mezzanine cards. The SRL enables partitioning of the PCB 1149.1/JTAG infrastructure on-the-fly into short faster rings or to access plug-in daughter boards with JTAG components. The use of a single scan-chain implemented with buffers would create additive delays that lengthen the test clock period. This results in longer on-board programming times, slower boundary-scan and JTAG emulation based test and slower on-chip instrument access times. When the PCB JTAG chain is not routed at all, bed-of-nails fixturing is needed, increasing production costs and removing the ability to test, configure or debug components on the PCB in-situ. The SRL is critical to providing access not just for PCB boundary-scan test, but also to access on-chip Array BIST, Logic BIST, BERT and other at-speed on-chip instruments while the PCB is in its chassis. The local JTAG ports are programmable from 1.5V to 3.3V and can be set to two separate JTAG chain voltages, thus eliminating external voltage translators required by 3.3V-only competing solutions. The SRL provides four buffered TCK and TMS pairs per local JTAG port. The JTAG controlled TCK and TMS copies reduce performance limiting loading capacitance while preserving testability for scan-chain shorts and opens. The SRL includes wide-capture which enables higher JTAG test frequencies for PCBs with long JTAG routing and transparent test-logic-reset which enables test-logic-reset commands to propagate to compliant ICs without losing the SRL ring configuration as is the case with competing devices. The IC compatibility modes enable third party tools such as emulators and FPGA programming pods to access the scan rings.

Access to components over IEEE 1149.1 in complex PCBs is critical for in-situ silicon debug, processor emulation test and future P1687 (IJTAG) tests. The SRL furthers our leadership position in offering semiconductors that lower product costs and enable customers to maximize the benefits of these standards said CJ Clark, CEO of Intellitech.

The device is available in a leaded or RoHS and commercial or industrial temperature ranges. Pricing starts at $5.15 in 1K quantities. More information is available at http://www.intellitech.com/products/srl.asp

High Density Photo: http://www.intellitech.com/img/jtaglinker.jpg

About Intellitech

http://www.intellitech.com/company/about.asp



Contact:

Intellitech Corporation
Kareen Lefoley, 603-868-7116x106
Email Contact




Review Article Be the first to review this article
Rand3D

SolidCAM: SolidCARE

Featured Video
MCAD Corporate Newsletter
rss feed
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
NVIDIA’s AI Computer Drives AVs
Jobs
Senior Mechanical Engineer for Albert Kahn and Associates at Detroit, MI
Mechanical Engineer for The Planate Management Group LLC at Perry Point, MD
Structural Engineer for The Planate Management Group LLC at Perry Point, MD
GIS Software Developer for UDC at Englewood, CO
GIS Analyst for G2 Partners LLC at San Ramon, CA
ENVIRONMENTAL GRAPHIC DESIGNER for Blitz at San Francisco, CA
Upcoming Events
ASSESS 2017 CONGRESS at Bolger Center Potomac MD - Nov 1 - 3, 2017
FABTECH 2017 at McCormick Place Chicago IL - Nov 6 - 9, 2017
ATX MINNEAPOLIS 2017 at Minneapolis MN - Nov 8 - 9, 2017
2017 China Chongqing International Machine Tool Show (CCIMT) at Chongqing International Expo Center, Yubei Chongqing China - Nov 13 - 16, 2017



Internet Business Systems © 2017 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise