Mentor Graphics Announces Support of Model-driven Design for Six Sigma in the Automotive Industry

WILSONVILLE, Ore.—(BUSINESS WIRE)—July 17, 2008— Mentor Graphics Corporation (Nasdaq: MENT) today announced that its virtual prototyping tool, SystemVision, supports Design for Six Sigma (DFSS) methodologies to achieve cost-effective design innovation by a model-driven development process.

The development process for a product made up of a complex blend of hardware and software, analog and digital signals, sensors and actuators, and a mix of disciplines, such as electrical, mechanical, or hydraulic, is difficult to manage efficiently. At the same time, using physical prototyping to optimize the design for manufacturability becomes prohibitively expensive, cumbersome, and time consuming.

DFSS methodologies combined with model-driven development can result in order-of-magnitude improvements in both productivity and quality when virtual prototyping, automated data collection, and statistical analyses are used to guide the model-driven development process. DFSS is a widely accepted approach to developing products that meet customer needs while minimizing defects. In a DFSS process, Six Sigma principles are applied during the product development process to eliminate potential quality problems before the product goes to volume manufacturing.

The SystemVision tool provides a mixed-signal, multi-discipline modeling/simulation environment that acts as a virtual lab for the design and analysis of distributed mechatronic systems. The SystemVision tool integrates with the Minitab® Statistical Software package by Minitab, Inc., which provides a framework for designing experiments and modeling quality measures. This enables users to access the SystemVision tools powerful multi-run simulation and analysis capabilities to automate data collection from mathematical models.

Model-driven development used in conjunction with Six Sigma enables companies to evaluate new ideas, optimize designs for cost and manufacturability, and quickly put new products into production, said Michelle Paret, Product Marketing Manager, Minitab, Inc. SystemVision and Minitab together enable Six Sigma practitioners and product developers to run powerful, automated simulations, while varying parameter value sets and operating conditions, to determine the best values to usethose that define a robust system capable of delivering the highest quality at the lowest cost.

The SystemVision tool leverages industry-standard modeling languages - VHDL-AMS, SPICE, and C - and includes graphical design entry capabilities, modeling and library tools, leading-edge simulation technology, and powerful waveform viewing and analysis tools.

Model-driven development is an approach to design that uses models to specify requirements, verify designs, and generate implementations. It allows each stakeholder to participate in the process at an appropriate level of abstraction, whether at the functional or specification level, architectural level, or implementation level. It enables options to be explored and trade-offs to be made at each level and provides a structure for communication between stakeholders such as system architects, system-level and component-level engineers, and Six Sigma practitioners.

The SystemVision tool provides the framework and tools to support such a model-driven development process. The design is managed through a model hierarchy starting at the functional specification stage, moving down through the architectural design stage, and then to the most detailed, component-level implementation stage of the process.

Systematic experimentation is crucial to investigating the factors that influence product quality. To compete in today's rapidly changing business world, companies must quickly attain high yield, cost-contained, robust results. Model driven development addresses this, said Darrell Teegarden, director of the system modeling & analysis business unit, Mentor Graphics.

The SystemVision tool provides a unique ability to specify statistical distributions for any VHDL/VHDL-AMS generic or SPICE parameter, using the values in monte carlo simulations, and post-process the results (e.g., create histograms of measured results, parametric plots of measured results vs. parametric values, etc.) This provides important capability for up-front development of required design parameter tolerances specifications, such as in a DFSS development process.

About Mentor Graphics

Mentor Graphics Corporation (Nasdaq: MENT) is a world leader in electronic hardware and software design solutions, providing products, consulting services and award-winning support for the worlds most successful electronics, semiconductor and automotive companies. Established in 1981, the company reported revenues over the last 12 months of over $850 million and employs approximately 4,200 people worldwide. Corporate headquarters are located at 8005 S.W. Boeckman Road, Wilsonville, Oregon 97070-7777. World Wide Web site: http://www.mentor.com/.

Mentor Graphics is a registered trademark and SystemVision is a trademark of Mentor Graphics Corporation. All other company or product names are the registered trademarks or trademarks of their respective owners.



Contact:

Mentor Graphics
James Price, 503-685-1778
Email Contact
or
Suzanne Graham, 503-685-7789
Email Contact




Review Article Be the first to review this article

Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Re-Use Your CAD: The ModelCHECK Handbook
Jobs
GIS Analyst II for Air Worldwide at Boston, MA
Senior Structural Engineer for Design Everest at San Francisco, CA
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise