Si2's Low Power Coalition Announces CPF Roadmap

AUSTIN, Texas—(BUSINESS WIRE)—February 22, 2008— Silicon Integration Initiative (Si2) today published the Low Power Coalition's (LPC) approved Roadmap for Common Power Format (CPF) extensions planned out through mid-2009, along with a Request for Technology (RTF) to support the CPF extensions as well as power/design flow-related requirements. This announcement underscores the vitality and relevance of the LPC work as it continues to evolve based on designer and end-user needs (see member list below).

The announced CPF extensions cover the following items - a detailed presentation of each item can be found at this link:

Immediate - Requirements for CPF Version 1.1 (target release - mid 2008)

-- Hierarchical flow support.

-- Memory modeling styles and support.

-- Gate-level verification flow CPF support.

-- Power estimation support

-- Clocking and related updates required to drive power optimization.

Medium Term - Requirements for CPF 1.2 (target release - early 2009)

-- Pre-Si and post_Si power modeling and budgeting.

-- Test power definitions not represented in CPF.

-- Investigate Load_foreign.

-- IO modeling and representation.

Long Term - Requirements for CPF 2.0 (target release - mid 2009)

-- CPF to drive debug related to power.

-- CPF based system level definition.

While the above items are an excellent start, they are recognized as only a start and will benefit from additional evolution and extension. It is also recognized that useful technologies exist in various companies in the industry. Those companies may be interested in being recognized for their technologies in various parts of the design flow from very high level all the way to the physical level. Sharing technologies and structures through the LPC can lead to faster industry progress and convergence. To that end, the LPC, with the assistance of Si2, has issued the Request for Technology, which is located at:


The CPF standard was approved and made publicly available in March of 2007, and since then has achieved wide acceptance in EDA tool adoption, use in end-user tool flows, numerous completed chip tape-outs and subsequent testimonials, and adoption into major foundry reference flows. In addition to the CPF 1.0 standard document (868 downloads) and CPF tutorial (625 downloads), adoption aids include CPF Parser software (53 downloads) and a CPF Pocket Guide (1310 downloads), all freely available from Si2. CPF is also supported by members of the Power Forward Initiative,

Within the next couple of weeks, a new CPF Relational Analyzer will be announced - another valuable (and free) adoption aid.

About the Low Power Coalition (LPC)

The Low-Power Coalition (LPC) is delivering enhanced capabilities in low-power Integrated Circuit (IC) design flows in particular relating to specifications of low-power design intent, architectural tradeoffs, logical/physical implementation, design verification and testability. Member companies are: Advanced Micro Devices (NYSE: AMD), ARM (Nasdaq: ARMHY), Atrenta, Azuro, Cadence Design Systems (Nasdaq: CDNS), Calypto Design Systems, ChipVision Design Systems, Entasys, Freescale Semiconductor, IBM (NYSE: IBM), Intel (Nasdaq: INTC), LSI Logic (NYSE: LSI), NXP Semiconductors, Sequence Design, and Virage Logic (Nasdaq: VIRL). For further information on the Low Power Coalition, see

About Si2

Si2 is an organization of industry-leading semiconductor, systems, EDA, and manufacturing companies focused on improving the way integrated circuits are designed and manufactured in order to speed time to market, reduce costs, and meet the challenges of sub-micron design. Si2 is uniquely positioned to enable collaboration through a strong implementation focus driven by its member companies. Si2 focuses on developing practical technology solutions to industry challenges. Si2 represents companies involved in all parts of the silicon supply chain throughout the world.

All trademarks are the property of their respective owners.


Silicon Integration Initiative (Si2)
Bill Bayer, 512-342-2244 ext.304


Review Article Be the first to review this article

SolidCAM: Program your CNCs directly inside your existing CAD system.

Featured Video
CAD Systems Administrator for KLA-Tencor at Milpitas, CA
Principal Research Mechatronics Engineer for Verb Surgical at Mountain View, CA
Senior Mechanical Engineer for Verb Surgical at Mountain View, CA
Industrial Designer Intern – Spring 2017 for Nvidia at Santa Clara, CA
Lead Geospatial Analyst for Alion at McLean, VA
Upcoming Events
SOLIDWORKS 2017 Launch Event – Walsall at Village Hotel Club, Walsall, WS2 8TJ Walsall United Kingdom - Mar 30, 2017
PI APPAREL Hong Kong 2017 at SHANGRI-LA KOWLOON 64 Mody Road Tsim Sha Tsui East Kowloon Hong Kong - Apr 5 - 6, 2017
SOLIDWORKS intro and hands on session – Slough at Baylis House, Slough, Berkshire, SL1 3PB Slough United Kingdom - Apr 7, 2017
Engineer 3D! Training + Technology Conference at Hyatt Regency Milwaukee 333 West Kilbourn Avenue Milwaukee WI - Apr 25 - 26, 2017

Internet Business Systems © 2017 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise