Dolphin Integration Launch the densest 32-bit processor for SoC embedded Control Applications

Grenoble, France - January 28, 2008 -This APS32 architecture extends the legacy products, the 8-bit Flip8051 and the the 16-bit Flip80251 with a first configuration. The FlipAPS32-051H is positioned as the smallest 32-bit core on the market but it is also dedicated to Ultra Low Power Consumption applications.

It partakes in enabling a wide range of microcontrollers by including state-of-the-art peripherals from the company’s catalog of mixed signal Virtual Components of IP.

“On the one hand, our platform strategy enables a smooth upward migration from 8051 and 80251, while on the other hand our Memory and Standard Cell offering ensure higher performances, comments Pauline Buttin, microcontroller marketing manager, as the Development platform PRIDE™ facilitates application retargeting with a significant gain of silicon area”.

The upgrade of BIRD™, the Built-In-Real-time Debugger, one of our well-known development solutions, shall released incessantly to provide with the most effective solution for application-rich SoC developments.

FlipAPS32-051H is licensed jointly by CORTUS and DOLPHIN Integration.

For More information please visit FlipAPS32-051H page 

Contact:

Email Contact




Review Article Be the first to review this article

Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Siemens Goes ECAD With Mentor Graphics Acquisition
Jobs
Mechanical Engineer for IDEX Corporation at West Jordan,, UT
Senior Structural Engineer for Design Everest at San Francisco, CA
GIS Analyst II for Air Worldwide at Boston, MA
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017
SolidCAM: Program your CNCs directly inside your existing CAD system.



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise