Cimatron to Partner With Leading Machine Vendors at EMO

Leading Machine Vendors Will Use Cimatron's Software to Showcase a Range of Capabilities Ranging from 3-Axis to 5-Axis Machining

GIVAT SHMUEL, Israel, September 14 /PRNewswire-FirstCall/ -- Leading machine vendors presenting at the upcoming EMO tradeshow will demonstrate live cutting of parts programmed by Cimatron's NC software.

GF AgieCharmilles (Booth B18, Hall 27) will demonstrate milling of an aerospace ring on their 5-Axis Mikron HPM 1850U Machine, showcasing the ability to minimize air cutting with stock consideration, swarfing and joggle shaping, as well as the usage of conic and undercut tools such as slot and dove-tail mills.

A 700 mm long steam turbine will be machined on Okuma's 5-Axis MB-66V Machine (Booth C18, Hall 27), highlighting the ability to maintain exact aerodynamic conditions and create a smooth surface finish, using 4-axis vertical machining center with 2 synchronized rotary tables, endless A axis, and continuous spiral cut.

Bharat Fritz Werner (Booth E26, Hall 27) will demostrate 3-Axis milling of a forging rod part on the high speed BFW Tejas Machine, utilizing multiple techniques to shorten cycle times, including rest roughing, corner reduction, and small cutters to eliminate the need for EDM.

Breton (Booth C53, Hall 13) will mill a 210mm dia. Impeller on their Ultrix 800RT machine, showcasing the ability to cope with complex parts using long tools and thin shanks to remove material between the blades and prevent vibration of the blade during milling.

With over 20,000 installations worldwide, Cimatron is a leading provider of CAD/CAM solutions for tool making and manufacturing. Cimatron's NC solutions include powerful built-in CAD capabilities that help prepare the geometry for best machining results.

Cimatron NC 5-Axis Production supports positioning and continuous milling, providing full control over the tilt and lead angles as well as complete gouge and collision check. Touch-of-a-button 5-axis tilting solution is especially suitable for parts with deep cavities, narrow ribs, and tight corners, allowing the use of shorter and rigid tools for rapid machining and superb surface quality.

Cimatron's 5-Axis solution includes a rich set of solutions to support streamlined 5-Axis machining of common applications such as impellers, turbine blades, electrodes, and engraving. To smooth the integration of the application into the 5-Axis manufacturing environment, an extensive selection of post-processors is provided by Cimatron.

"EMO provides a unique opportunity to see Cimatron's advanced machining capabilities demonstrated on multiple machines under one roof," said Danny Haran, Cimatron's President and Chief Executive Officer. "With a range of NC solutions from 3- to 5-axis, we help leading tool makers and manufacturers produce high quality tools and parts while significantly shortening delivery times."

The 2007 EMO trade fair will take place in Hanover, Germany. The latest products and services for the metalworking industry will be on display, with special emphases on cutting, splitting, milling and metal forming machine tools, manufacturing systems, precision tools, automation components, computer technology, industrial electronics and accessories. More details can be found at

Visit Cimatron at EMO, September 17-22, 2007

Hall 6, stand K18

About Cimatron

With more than 20,000 installations worldwide, Cimatron is a leading provider of integrated, CAD/CAM solutions for mold, tool and die makers as well as manufacturers of discrete parts. Cimatron is committed to providing comprehensive, cost-effective solutions that streamline manufacturing cycles, enable collaboration with outside vendors, and ultimately shorten product delivery time. Cimatron's cutting-edge CAD/CAM solutions are widely used in the automotive, medical, consumer plastics, electronics, and other industries.

Founded in 1982, Cimatron is publicly traded on the NASDAQ exchange under the symbol CIMT. Cimatron's subsidiaries and extensive distributor network are located in over 35 countries to serve customers worldwide with complete pre- and post-sales support. For more information, please visit

This press release includes forward looking statements, within the meaning of the Private Securities Litigation Reform Act Of 1995, which are subject to risk and uncertainties that could cause actual results to differ materially from those anticipated. Such statements may relate to the company's plans, objectives and expected financial and operating results. The words "may," "could," "would," "will," "believe," "anticipate," "estimate," "expect," "intend," "plan," and similar expressions or variations thereof are intended to identify forward-looking statements. Investors are cautioned that any such forward-looking statements are not guarantees of the future performance and involve risks and uncertainties, many of which are beyond the company's ability to control. The risks and uncertainties that may affect forward looking statements include, but are not limited to: currency fluctuations, global economic and political conditions, marketing demand for Cimatron products and services, long sales cycle, new product development, assimilating future acquisitions, maintaining relationships with customers and partners, and increased competition. For more details about the risks and uncertainties of the business, refer to the Company's filings with the Securities and Exchanges Commission. The company cannot assess the impact of or the extent to which any single factor or risk, or combination of them, may cause. Cimatron undertakes no obligation to publicly update or revise any forward looking statements, whether as a result of new information, future events or otherwise.

    For More Information Contact:
    Idit Pass Lagziel
    Marketing Manager
    Cimatron Ltd.
    Phone: +972-3-5312098
Email Contact

    Ilan Erez
    Chief Financial Officer
    Cimatron Ltd.
    Phone: +972-3-531-2121
Email Contact

    Yael Nevat
    Phone: +972-3-611-4466
Email Contact

Review Article Be the first to review this article
Autodesk - DelCAM

Featured Video
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Apple Adding To Computer Product Line Minus Ports
Currently No Featured Jobs
Upcoming Events
Electric&Hybrid Aerospace Technology Symposium 2016 at Conference Centre East. Koelnmesse (East Entrance) Messeplatz 1 Cologne Germany - Nov 9 - 10, 2016
Autodesk University Las Vegas at Las Vegas NV - Nov 15 - 17, 2016
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
TurboCAD pro : Start at $299

Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise