ALT LLC Announces Upcoming Indiegogo Campaign: Recycled 3D Printing Filament from Everyday Plastic Waste

SANTA BARBARA, Calif., Dec. 8, 2016 — (PRNewswire) — Additive manufacturing (AM) company ALT LLC ( https://3DALT.com) announced today that they will launch an Indiegogo Campaign in late December of this year. The campaign will raise funds to produce high performance Recycled 3D Printing Filament made from everyday plastic waste.

Photo - http://photos.prnewswire.com/prnh/20161208/447030
Photo - http://photos.prnewswire.com/prnh/20161208/447031

The company operates a 3D Printing Service, providing design, fabrication, and consultation services at https://3DALT.com/3D-Printing-Service/. After purchasing roll after roll of plastic filament, ALT realized that, although AM offers many environmental benefits over standard manufacturing, they were still introducing virgin plastic into the waste stream in Santa Barbara. The company set out to create a new way to doing business by offering recycled and recyclable products to the 3D printing community.

In the United States, only 9% of post-consumer plastic (2.8 million tons) was recycled in 2012 [1]. The remaining 32 million tons were discarded. California lawmakers have set a new target for the state to recycle 75% of waste by 2020 as per the new law AB 341 [2]. ALT wants to see manufacturing in California revolutionized. Their goal is to reduce the amount of plastic waste that ends up in landfills, waterways and ultimately, our oceans by sourcing the plastic waste used to make their filament from local California waste collection facilities. ALT hopes their initiative inspires other local engineering firms to adopt green practices.

ALT's recycled 3D printing filament is produced in house and made from a class of polymers called Polyolefins. This includes common plastics such as Polypropylene (PP), Low-Density Polyethylene (LDPE), and High-Density Polyethylene (HDPE) used to make plastic bags, milk jugs, bottle caps, and other short-lived products that are discarded within a year of manufacture.

Polyolefins have excellent properties for use in many applications, which makes them the perfect material for 3D printing. Both high and low-density polyethylene are desirable due to their flexibility, toughness, ability to withstand high temperatures (>80C), and their impact, moisture and chemical resistance. Polypropylene is similar, but has a higher thermal resistance enabling it to withstand the heat of an autoclave. Together, polyolefins account for nearly half of the plastic being used on the planet today [3].

While several companies use plastic water bottles to make PET 3D printing filament, ALT wants to tackle the plastic that makes up the largest amount waste and that rarely gets recycled. Supporting this campaign will help ALT produce their high performance recycled 3D printing filaments and bring them to market at an affordable price significantly reducing waste and making an impact on the environment.

To sign up for campaign updates and get priority access to exclusive perks, go to https://3dalt.com/recycled-3d-printing-filament/.  

About: ALT LLC is pioneering advancements in 3D printing hardware, software and materials. Located in beautiful Santa Barbara, CA, the startup specializes in the development and characterization of advanced materials and 3D printing filaments with superior physical properties.

Contact Information:
Dr. Jonathon Barton, CEO, ALT LLC
Phone: (800) 273-5517
Email: Email Contact 
Website: https://3DALT.com 
Address: 2062 Alameda Padre Serra #101
Santa Barbara, CA 93103

 

 

REFERENCES



[1]

G. Gourmelon, "Worldwatch Institute," January 2016. [Online]. Available: http://www.worldwatch.org/global-plastic-production-rises-recycling-lags-0.

[2]

S. Smithline, "Calrecycle," February 2016. [Online]. Available: http://www.calrecycle.ca.gov/Publications/Documents/1554/201601554.pdf.

[3]

Plastics Europe, "Plastics-the Facts 2014/2015," 2015. [Online]. Available: http://www.plasticseurope.org/documents/document/20150227150049-final_plastics_the_facts_2014_2015_260215.pdf.

 

To view the original version on PR Newswire, visit: http://www.prnewswire.com/news-releases/santa-barbara-additive-manufacturing-company-alt-llc-announces-upcoming-indiegogo-campaign-recycled-3d-printing-filament-from-everyday-plastic-waste-300375308.html

SOURCE ALT LLC

Contact:
ALT LLC
Web: https://3DALT.com




Review Article Be the first to review this article
Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Blockchain For The Manufacturing Supply Chain
Jobs
Mechanical Design Engineer 3 for KLA-Tencor at Milpitas, CA
Director of Process Engineering. for Tekni-Plex at Toledo, OH
Sr Mechanical Design Engineer for Medtronic at mounds view, MN
System Designer/Engineer for Bluewater at Southfield, MI
Geospatial Systems Administrator for BAE Systems Intelligence & Security at arnold, MO
Senior Mechanical Engineer for BAE Systems Intelligence & Security at Arlington, VA
Upcoming Events
Formlabs LA 3D Printing Roadshow at Munky King Lost Angeles CA - Feb 8 - 9, 2018
ESPRIT World 2018 at Indianapolis Marriott Downtown 350 West Maryland Street Indianapolis IN - Jun 11 - 15, 2018
HxGN LIVE 2018 at The Venetian Las Vegas NV - Jun 12 - 15, 2018
IMTS2018 International Manufacturing Tech Show at McCormick Place Chicago IL - Sep 10 - 15, 2018
Tebis



Internet Business Systems © 2018 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise