Intergraph PV Elite Webinar to Demonstrate Pressure Vessel Design to Avoid Collapse Due to Vacuum

HOUSTON, TX -- (Marketwired) -- Aug 10, 2016 -- Intergraph will host a PV Elite webinar on August 25, 2016 at 10:00 a.m. CDT (Houston) / 5:00 p.m. CEST (Amsterdam) that will demonstrate pressure vessel design using the code approach for vacuum conditions. When a vacuum occurs, the vessel can experience a sudden and catastrophic collapse without any warning. When this happens, it can destroy the vessel itself plus equipment attached to the vessel, causing extensive damage. Using the appropriate vessel code can help prevent this type of costly and dangerous situation. The webinar leader will be Ray Delaforce, senior support engineer and trainer for PV Elite and TANK software at Intergraph CADWorx & Analysis Solutions.

For more information about the webinar, visit http://coade.typepad.com/coadeinsider/2016/07/pv-elite-webinar.html. To register for the webinar, visit http://icas.intergraph.com/20160825-PV-Elite-Vacuum.

For information on Intergraph analysis products, visit http://ppm.intergraph.com/products/analysis-product-family. For more information on Intergraph PV Elite, visit http://ppm.intergraph.com/products/analysis-product-family/pv-elite.

About Intergraph CADWorx & Analysis Solutions
Intergraph CADWorx & Analysis Solutions is part of Intergraph Process, Power & Marine (PP&M). It develops and supports the following products: CADWorx, for plant design; CAESAR II, for pipe stress analysis; PV Elite and Visual Vessel Design, for pressure vessel analysis; TANK, for storage tank analysis; and GT STRUDL, for structural analysis.

Soon to be known as Hexagon Process, Power & Marine, Intergraph PP&M is part of Hexagon (Nasdaq Stockholm:HEXA B; hexagon.com), a leading global provider of information technologies that drive quality and productivity across geospatial and industrial enterprise applications.

© 2016 Intergraph Corporation. All rights reserved. Intergraph, the Intergraph logo, CADWorx, CAESAR II, PV Elite and GT STRUDL are registered trademarks, and TANK is a trademark, of Intergraph Corporation or its subsidiaries. Other brands and product names are trademarks of their respective owners.

Contacts
Gary Carson
+1.713.668.8550

Email Contact
Vornel Walker
+1.281.890.4566 





Review Article Be the first to review this article
SolidCAM: Program your CNCs directly inside your existing CAD system.


Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Siemens Goes ECAD With Mentor Graphics Acquisition
Jobs
Mechanical Engineer for IDEX Corporation at West Jordan,, UT
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
GIS Analyst II for Air Worldwide at Boston, MA
Senior Structural Engineer for Design Everest at San Francisco, CA
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise