Materialise CEO Calls for Common Approach in Measuring Clinical Evidence for Medical 3D Printing

Orlando, Florida – May 5, 2016 -  Fried Vancraen, CEO of Materialise NV (Nasdaq: MTLS), the leading provider of Additive Manufacturing software and sophisticated 3D Printing solutions in the medical and industrial markets, calls upon industry stakeholders to come to an agreement for a common standard for measuring the clinical, economical and patient benefits of medical 3D printing in delivering better patient outcomes. Materialise will be leading this on-going initiative as the founding sponsor of the Building Evidence for 3D Printing Applications in Medicine event hosted by SME.

It is becoming increasingly clear that 3D printed anatomical models, guides and implants will be part of the future of patient treatment, for more than just complex procedures. But, unlike the mass-produced medical device industry, adoption of 3D printing needs more generally accepted measurement standards. The application of consistent and complete evidence-gathering methodologies across the industry could significantly foster the adoption of 3D Printing application in the healthcare sector.

A unified initiative addressing the clinical measurement challenge will further enhance the healthcare industry’s confidence in the clinical benefits of medical 3D Printing. A set of globally accepted guidelines adopted by the major medical 3D printing industry players will convince key stakeholders like physicians, hospitals and policy makers to accelerate adoption of the technology. What is more, governmental bodies and insurance companies are more likely to be open to including medical 3D printing as part of their approved list of medical procedures and devices, leaving patients with the opportunity to leverage the best solutions that technology has to offer for their care.

‘A call to apply evidence-based medicine’

There have been several initiatives aimed at properly measuring and validating the clinical benefits of medical 3D Printing, but all have suffered from a lack of coordination and agreed-upon research methodologies,” stated Fried Vancraen, CEO of Materialise NV.  “The fact is, we can only be successful if we take an evidence-based approach across the industry, acting in concert with a set of protocols, methodologies and measurement guidelines. With the proper scientific rigor, our ambition of gaining widespread acceptance of medical 3D Printing will be realized more swiftly, and the patients whom we aim to serve will benefit the most.”

‘Materialise will continue to lead by example’

Meeting the rigorous criteria of evidence-based medicine would not only accelerate the adoption of medical 3D Printing but it would also benefit the lives of so many patients who have no access to the amazing health benefits afforded by medical 3D Printing today. Materialise is committing to take a leadership role in what has to be an industry-wide initiative to begin studying and designing a new evidence-based approach that will factor in all key perspectives: economical, clinical, engineering and patient.

“The goal is nothing short of establishing the groundwork for producing solid clinical evidence on 3D printed medical applications, including anatomical models, patient-specific guides and implants,” added Fried Vancraen.  “Anything short of this will slow down the wonders of medical 3D Printing from becoming available to patients and medical professionals the world over.”

Be part of the initiative

Join Materialise as the founding sponsor at the Building Evidence for 3D Printing Applications in Medicine event hosted by SME, following the RAPID Conference, an annual 3D printing and additive manufacturing event, on May 19-20 in Orlando, Florida. For more information and to register, please visit www.materialise.com/building-evidence-for-medical-3d-printing or contact Jessica Morrison at 734.259.6685.

About Materialise

Materialise incorporates more than 25 years of 3D printing experience into a range of software solutions and 3D printing services, which together form the backbone of the 3D printing industry. Materialise’s open and flexible solutions enable players in a wide variety of industries, including healthcare, automotive, aerospace, art and design, and consumer goods, to build innovative 3D printing applications that aim to make the world a better and healthier place. Headquartered in Belgium, with branches worldwide, Materialise combines the largest group of software developers in the industry with one of the largest 3D printing facilities in the world. For additional information, please visit:  www.materialise.com.

 

Contact:

Virginia Goble
Marketing and Strategy
Mobile: (248) 921.5000
Email:  Email Contact




Review Article Be the first to review this article

Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Siemens Goes ECAD With Mentor Graphics Acquisition
Jobs
Mechanical Engineer for IDEX Corporation at West Jordan,, UT
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
Senior Structural Engineer for Design Everest at San Francisco, CA
GIS Analyst II for Air Worldwide at Boston, MA
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise