Mentor Automotive Drives Industry Towards Enhanced In-Car Audio Experience

Automotive system design leader introduces development platform to reduce time to market for design of audio network systems based on Automotive Audio Bus® (A2B®) technology

WILSONVILLE, Ore., Dec. 21, 2015 — (PRNewswire) —  Mentor Graphics Corporation (NASDAQ: MENT) today announced the Mentor Automotive A2B Analyzer®, the industry's first third-party development platform supporting the Automotive Audio Bus (A2B) technology developed by Analog Devices, Inc. As automotive design complexity continues to grow, OEMs and suppliers are challenged with integrating faster, more efficient technologies into the automotive architecture at lower system costs. The Automotive Audio Bus technology facilitates the design of in-vehicle audio networks with reduced cost and complexity, and the A2B Analyzer helps significantly reduce the development time for these systems.

Mentor Automotive A2B Analyzer, the industry's first third-party platform supporting the Automotive Audio Bus (A2B) technology

Automotive Audio Bus (A2B): Lowest Cost-Per-Node Audio Networking Solution
The A2B technology from Analog Devices is optimized to deliver superior audio quality while reducing system cost, weight, and design complexity. A2B utilizes a master-slave line topology to deliver audio and control data, together with clock and power over a single two-wire, unshielded twisted pair cable. The low-latency, deterministic nature of the A2B technology is particularly well suited for cutting-edge in-car audio applications such as hands-free systems, speech recognition and active noise cancellation.

Mentor Automotive System Design
Leveraging its deep industry experience and system design expertise, Mentor® Automotive designed the A2B Analyzer System hardware and software solution from the ground up in close co-operation with Analog Devices. This enables complete A2B network solutions from early proof-of-concept development, network design and validation over professional tooling, to production systems with custom configurations. This system is part of the Connected OS™ software development platform which includes the IVI head unit, enabling a distributed speaker network for audio throughout the vehicle, and microphones for active noise control, and the A2B Analyzer System for easy set-up, configuration and functional testing: a complete cockpit development platform utilizing A2B technology.

"Mentor Automotive is a leading technology solutions provider in the industry and we are excited by their pioneering test and analysis solutions for the A2B technology. We are confident our customers will benefit greatly from these offerings in the form of easier network configuration, analysis and debug, resulting in a shorter time to market," said Vlad Bulavsky, General Manager Automotive Cabin Electronics Business Unit, Analog Devices.

OEMs need a protocol that can solve multiple problems: simplifying the electrical system design allows OEMs to offer the consumer multiple vehicle configurations; simultaneously reducing cabling weight thus improving fuel efficiency; and enabling an enhanced in-car experience across the fleet by delivering high quality signal throughout the vehicle with audio, control, clock and power all provided over unshielded twisted pair cable, further reducing the cost-per-node.

"We have seen a strong interest in the A2B technology as car makers look to reduce the weight and cost of cabling in their production vehicles, as well as creating superior audio experiences for their customers.  Our design analysis tools will ensure that system performance is optimized for the many different audio sources and playback devices in a modern vehicle," stated Rainer Oder, General Manager, Mentor Automotive.

Availability
The Mentor Automotive A2B Analyzer system and the Connected OS™ software platform are available for evaluation now. More information is available on the A2B Analyzer web page.

Visit Mentor Automotive at CES 2016
Mentor Automotive In-Car Experience technologies will be available at Consumer Electronics Show, including demonstrations of the A2B Analyzer System, and active noise cancellation over the A2B network. 

About Mentor Automotive
Mentor Automotive provides a leading portfolio of automotive design tools and software, built on deep expertise in systems engineering, to help customers solve the most complex design challenges facing the industry. Solutions reside in three key areas for automotive electrical and electronic design: connectivity and networking; in-car experience; and sub-systems and technology. More information: www.mentor.com/automotive

About Mentor Graphics
Mentor Graphics Corporation is a world leader in electronic hardware and software design solutions, providing products, consulting services and award-winning support for the world's most successful electronic, semiconductor and systems companies. Established in 1981, the company reported revenues in the last fiscal year in excess of $1.24 billion. Corporate headquarters are located at 8005 S.W. Boeckman Road, Wilsonville, Oregon 97070-7777. World Wide Web site: http://www.mentor.com/

Media Contact

James Price
Mentor Automotive
503.685.1778
Email Contact

(Mentor Graphics and Mentor are registered trademarks, and Connected OS is a trademark of Mentor Graphics Corporation. All other company or product names are the registered trademarks or trademarks of their respective owner.)

Automotive Audio Bus and A2B are registered trademarks of Analog Devices, Inc.

Mentor Graphics logo

Photo - http://photos.prnewswire.com/prnh/20151218/297283
Logo - http://photos.prnewswire.com/prnh/20140317/AQ83812LOGO

 

To view the original version on PR Newswire, visit: http://www.prnewswire.com/news-releases/mentor-automotive-drives-industry-towards-enhanced-in-car-audio-experience-300195358.html

SOURCE Mentor Graphics Corporation

Contact:
Mentor Graphics Corporation
Web: http://www.mentor.com

 




Review Article Be the first to review this article

Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Siemens Goes ECAD With Mentor Graphics Acquisition
Jobs
Mechanical Engineer for IDEX Corporation at West Jordan,, UT
GIS Analyst II for Air Worldwide at Boston, MA
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
Senior Structural Engineer for Design Everest at San Francisco, CA
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017
SolidCAM: Program your CNCs directly inside your existing CAD system.



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise