3D Systems Announces Conference Call and Webcast to Discuss Third Quarter and Nine Months 2015 Results

ROCK HILL, S.C., Oct. 20, 2015 (GLOBE NEWSWIRE) -- 3D Systems Corporation (NYSE:DDD) announced today that it plans to hold a conference call and simultaneous webcast to discuss its financial results for the third quarter and first nine months of 2015 on Wednesday, November 4, 2015, at 8:30 a.m. Eastern Time. The company expects to release these financial results and to file its Form 10-Q on November 4, 2015.

Date: Wednesday, November 4, 2015

Time: 8:30 a.m. Eastern Time

Listen via Internet: www.3dsystems.com/investor

Participate via telephone:
Within the U.S.: 1-877-407-8291
Outside the U.S.: 1-201-689-8345

The recorded webcast will be available beginning approximately two hours after the live presentation at www.3dsystems.com/investor.

Forward-Looking Statements

Certain statements made in this release that are not statements of historical or current facts are forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995. Forward-looking statements may involve known and unknown risks, uncertainties and other factors that may cause the actual results, performance or achievements of the company to be materially different from historical results or from any future results or projections expressed or implied by such forward-looking statements.  In addition to statements that explicitly describe such risks and uncertainties, readers are urged to consider statements in the conditional or future tenses or that include terms such as "believes," "belief," "expects," "estimates," "intends," "anticipates" or "plans" to be uncertain and forward-looking.  Forward-looking statements may include comments as to the company's beliefs and expectations as to future events and trends affecting its business and are necessarily subject to uncertainties, many of which are outside the control of the company. The factors described under the headings "Forward-Looking Statements," "Cautionary Statements and Risk Factors," and "Risk Factors" in the company's periodic filings with the Securities and Exchange Commission, as well as other factors, could cause actual results to differ materially from those reflected or predicted in forward-looking statements. Readers are cautioned not to place undue reliance on these forward-looking statements, which speak only as of the date hereof. 3D Systems undertakes no obligation to update or revise any forward-looking statements, even if experience or future changes make it clear that projected results expressed or implied in such statements will not be realized, except as may be required by law.

About 3D Systems

3D Systems provides the most advanced and comprehensive 3D digital design and fabrication solutions available today, including 3D printers, print materials and cloud-sourced custom parts. Its powerful ecosystem transforms entire industries by empowering professionals and consumers everywhere to bring their ideas to life using its vast material selection, including plastics, metals, ceramics and edibles. 3DS' leading personalized medicine capabilities include end-to-end simulation, training and planning, and printing of surgical instruments and devices for personalized surgery and patient specific medical and dental devices. Its democratized 3D digital design, fabrication and inspection products provide seamless interoperability and incorporate the latest immersive computing technologies. 3DS' products and services disrupt traditional methods, deliver improved results and empower its customers to manufacture the future now.

Leadership through Innovation and Technology

  • 3DS invented 3D printing with its Stereolithography (SLA) printer and was the first to commercialize it in 1989.
  • 3DS invented Selective Laser Sintering (SLS) printing and was the first to commercialize it in 1992.
  • 3DS invented and commercialized its patented, ground-breaking force-feedback haptic devices in 1993.
  • 3DS invented the ColorJet Printing (CJP) class of 3D printers and was the first to commercialize 3D powder-based systems in 1994.
  • 3DS invented MultiJet Printing (MJP) printers and was the first to commercialize it in 1996.
  • 3DS pioneered virtual surgical simulation (VSSTM) and virtual surgical planning (VSP®) as part of its portfolio of leading 3D healthcare products and services.
  • 3DS pioneered scan-based design with the release of the patented Geomagic Design X (XOR) software in 2006.

Today its comprehensive range of 3D printers is the industry's benchmark for production-grade manufacturing in aerospace, automotive, patient specific medical device and a variety of consumer, electronic and fashion accessories.

More information on the company is available at www.3dsystems.com.

CONTACT: Investor Contact: Stacey Witten
         Email: investor.relations@3dsystems.com
         Media Contact: Wendy Pinckney
         Email: Press@3dsystems.com

3D Systems Corporation Logo

Review Article Be the first to review this article
SolidCAM: Program your CNCs directly inside your existing CAD system.

Featured Video
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Apple Adding To Computer Product Line Minus Ports
Currently No Featured Jobs
Upcoming Events
3D Collaboration & Interoperability Congress at 1310 Washington Ave. Golden CO - Oct 25 - 26, 2016
Electric&Hybrid Aerospace Technology Symposium 2016 at Conference Centre East. Koelnmesse (East Entrance) Messeplatz 1 Cologne Germany - Nov 9 - 10, 2016
Autodesk University Las Vegas at Las Vegas NV - Nov 15 - 17, 2016
TurboCAD pro : Start at $299

Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise