Market Pulse of the Information Technology Sector -- Autodesk, Flextronics International, Broadcom Corporation, Cadence Design Systems and Analog Devices

NEW YORK, September 23, 2015 — (PRNewswire) —

ACI Association has initiated research coverage on the following equities: Autodesk, Inc.  (NASDAQ: ADSK), Flextronics International Ltd. (NASDAQ: FLEX), Broadcom Corporation (NASDAQ: BRCM), Cadence Design Systems, Inc. (NASDAQ: CDNS), Analog Devices, Inc. (NASDAQ: ADI). On Tuesday, September 22, 2015, Nasdaq ended at 4,756.72, down 1.50%, DOW declined 1.09% to finish the day at 16,330.47, and the S&P closed at 1,942.74, down 1.23%. Register for your complimentary reports at the links given below.    

--

Autodesk Inc.    

--

Autodesk Inc.'s stock edged lower by 1.01% to close Tuesday's session at USD 46.93. The company's shares oscillated between USD 46.34 and USD 47.45. The stock recorded a trading volume of 3.51 million shares, which was above its 52-week average volume of 2.47 million shares. Over the last three days Autodesk Inc.'s shares have advanced 0.32% and in the past one week the stock has moved up 0.66%. Furthermore, over the last three months the stock has lost 13.24% and in the past six months the shares have shed 23.15%. On a compounded total return basis, the company has shown a positive return of 0.66% in the past one week while a negative return of 9.33% was noticed in the past one month. The stock is at a price to book ratio of 5.58. The historical PB ratio is near to 5.52. Sign up and read the free notes on ADSK at:   http://www.aciassociation.com/ADSK.pdf  

--

Flextronics International Ltd    

--

The stock of Flextronics International Ltd lost 2.97% to close Tuesday's session at USD 10.44. The shares of the company moved in the range of USD 10.36 and USD 10.78. A trading volume of 3.17 million shares was recorded, which was lower than its 52-week average volume of 4.13 million shares. Over the last five days Flextronics International Ltd's shares have declined by 4.74% and in the past one month the stock has lost 2.70%. Additionally, over the last three months the stock has declined 13.58% and in the past six months the shares have registered a loss of 16.14%. The company stock has shown negative returns of 0.67% in the past one month and 14.07% in the last three months, on a compounded total return basis. Further, the company is trading at a price to earnings ratio of 11.47 and a price to book ratio of 2.42. This compares to a historical PE ratio of 12.48 and historical PB ratio of 3.02. Register for free on ACI Association and access the latest research on FLEX at:   http://www.aciassociation.com/FLEX.pdf  

--

Broadcom Corp    

--

Broadcom Corp's stock decreased by 1.12% to close Tuesday's session at USD 52.12. The company's shares fluctuated in the range of USD 51.79 and USD 52.40. A total of 3.05 million shares exchanged hands, which was lesser than its 50-day daily average volume of 5.55 million shares. Over the last three days Broadcom Corp's shares have declined by 2.54% and in the past one week the stock has moved down 3.12%. Furthermore, over the last three months the stock has lost 2.87% while in the past six months the shares have picked up 16.91%. Broadcom Corp has a current dividend yield of 1.06%. Further, the company is trading at a price to earnings ratio of 29.45 and the stock is at a price to book ratio of 3.29. The complete research on BRCM is available for free at:   http://www.aciassociation.com/BRCM.pdf  

--

Cadence Design Systems Inc.    

--

Cadence Design Systems Inc.'s stock added 0.62% to close Tuesday's session at USD 21.21. The company's shares oscillated between USD 20.73 and USD 21.25. The stock recorded a trading volume of 3.04 million shares, which was above its 50-day daily average volume of 2.55 million shares. Over the last five days Cadence Design Systems Inc.'s shares have advanced 0.33% and in the past one month the stock has gained a momentum of 3.62%. The company stock has returned 7.12% in the past one month and 23.53% in the past one year, on a compounded total return basis. Further, the company is trading at a price to earnings ratio of 29.05 and the stock is at a price to book ratio of 4.42. Free in-depth research on CDNS is available at: http://www.aciassociation.com/CDNS.pdf  

--

Analog Devices Inc.    

--

Analog Devices Inc.'s stock declined 2.56% to close Tuesday's session at USD 55.18. The share price vacillated between USD 55.03 and USD 56.38. The stock recorded a trading volume of 2.91 million shares, which was above its 52-week average volume of 2.48 million shares. Over the last three days Analog Devices Inc.'s shares have declined by 4.75% and in the past one week the stock has moved down 5.35%. Moreover, in the last six months the stock has lost 8.58% while year to date the shares have picked up 1.55%. Further, the company is trading at a price to earnings ratio of 24.63 and price to book ratio of 3.10. Additionally, the stock is trading at a price to cash flow ratio of 12.95 and price to sales ratio of 4.09. The complimentary notes on ADI can be downloaded in PDF format at:   http://www.aciassociation.com/ADI.pdf  

--

About ACI Association: 

Active Charter Investors Association ("ACI Association") produces regular sponsored and non-sponsored reports, articles, stock market blogs, and popular investment newsletters covering equities listed on NYSE and NASDAQ and micro-cap stocks. ACI Association has two distinct and independent departments. One department produces non-sponsored analyst certified content generally in the form of press releases, articles and reports covering equities listed on NYSE and NASDAQ and the other produces sponsored content (in most cases not reviewed by a registered analyst), which typically consists of compensated investment newsletters, articles and reports covering listed stocks and micro-caps. Such sponsored content is outside the scope of procedures detailed below.

ACI Association has not been compensated; directly or indirectly; for producing or publishing this document.

PRESS RELEASE PROCEDURES:  

The non-sponsored content contained herein has been prepared by a writer (the "Author") and is fact checked and reviewed by a third party research service company (the "Reviewer"). Rohit Tuli, a CFA® charter holder (the "Sponsor"), provides necessary guidance in preparing the document templates. The Reviewer has reviewed and revised the content, as necessary, based on sound investment judgment and publicly available information which is believed to be reliable. The Reviewer and the Sponsor have not performed any independent investigations or forensic audits to validate the information herein. Unless otherwise noted, any content outside of this document has no association with the Author, the Reviewer, or the Sponsor (collectively referred to as the "Production Team") in any way. The Production Team is compensated on a fixed monthly basis and do not hold any positions of interest in any of the securities mentioned herein.  

NO WARRANTY 

ACI Association, the Author, the Reviewer and the Sponsor (collectively referred to as the "Publishers") are not responsible for any error which may be occasioned at the time of printing of this document or any error, mistake or shortcoming. No liability is accepted by the Publishers whatsoever for any direct, indirect or consequential loss arising from the use of this document. The Publishers expressly disclaim any fiduciary responsibility or liability for any consequences, financial or otherwise arising from any reliance placed on the information in this document. Additionally, the Publishers do not (1) guarantee the accuracy, timeliness, completeness or correct sequencing of the information, or (2) warrant any results from use of the information. The included information is subject to change without notice.

1 | 2  Next Page »



Review Article Be the first to review this article
SolidCAM: Program your CNCs directly inside your existing CAD system.


Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Siemens Goes ECAD With Mentor Graphics Acquisition
Jobs
Mechanical Engineer for IDEX Corporation at West Jordan,, UT
GIS Analyst II for Air Worldwide at Boston, MA
Senior Structural Engineer for Design Everest at San Francisco, CA
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise