Construction Employment Rises in 36 States And D.C. between August '14 & '15; But Only 25 States Add Jobs from July to August Amid Worker Shortages

California and Arkansas Add Most Jobs for the Year, Ohio and West Virginia Have Biggest Annual Decline; Texas and Iowa Top Monthly List of Gainers, New Mexico and Michigan Have Largest One-Month Drop

Sep 21, 2015 -- Construction employment expanded in 36 states and the District of Columbia between August 2014 and August 2015 while only 25 states added jobs between July and August, according to an analysis today of Labor Department data by the Associated General Contractors of America. Association officials noted that job gains may be lagging as many firms report they are having a hard time finding qualified workers to employ.

"While half the states added construction jobs in August, construction spending data and industry reports suggest demand for projects remains very strong," said Ken Simonson, chief economist for the association. "The apparent softness in hiring likely reflects contractors' difficulty in finding qualified workers."

California added the most new construction jobs (43,800 jobs, 6.5 percent) between August 2014 and August 2015. Other states adding a high number of new construction jobs for the past 12 months include Florida (25,700 jobs, 6.4 percent), North Carolina (13,200 jobs, 7.4 percent) and Washington (12,800 jobs, 8.0 percent). Arkansas (13.6 percent, 6,200 jobs) added the highest percentage of new construction jobs during the past year, followed by Idaho (10.0 percent, 3,600 jobs), South Carolina (9.1 percent, 7,500 jobs) and Iowa (8.9 percent, 6,700 jobs).

Thirteen states shed construction jobs during the past 12 months, while construction employment was unchanged in North Dakota. West Virginia (-15.1 percent, -5,100 jobs) lost the highest percent of construction jobs. Other states that lost a high percentage of jobs for the year include Rhode Island (-7.9 percent, -1,300 jobs), Mississippi (-7.4 percent, -3,600 jobs) and Ohio (-5.7 percent, -11,300 jobs). The largest job losses occurred in Ohio, West Virginia, Mississippi and Indiana (-3,600 jobs, -2.9 percent).

Texas (3,200 jobs, 0.5 percent) added the most construction jobs between July and August. Other states adding a high number of construction jobs include Ohio (2,700 jobs, 1.5 percent), North Carolina (2,700 jobs, 1.4 percent) and New York (2,600 jobs, 0.7 percent). Iowa (2.6 percent, 2,100 jobs) added the highest percentage of construction jobs during the past month, followed by Utah (1.6 percent, 1,300 jobs), Georgia (1.5 percent, 2,400 jobs), Hawaii (1.5 percent, 500 jobs), Nebraska (1.5 percent, 700 jobs) and Ohio.

Twenty-four states and the District of Columbia lost construction jobs during the past month while construction employment was unchanged in Louisiana. Michigan (-4,700 jobs, -3.0 percent) shed more construction jobs than any other state, followed by Virginia (-3,200 jobs, -1.7 percent), New Mexico (-2,300 jobs, -5.4 percent), Washington (-2,000 jobs, -1.1 percent) and Mississippi (-2,000 jobs, -4.3 percent). New Mexico lost the highest percentage of construction jobs between July and August, followed by Mississippi and Michigan.

AGC officials noted that the association released a survey last week that showed 86 percent of contractors reported trouble filling hourly or salaried professional positions. They added that these shortages appear to be having an impact on the sector's recovery and urge federal, state and local officials to act on the measures outlined in the association's Workforce Development Plan to reinvigorate the craft worker training pipeline.

"While construction employment increased in more than two-thirds of the states over the past year, these gains may fade in the near future unless the industry can attract more people to try construction as a career," said Stephen E. Sandherr, the association's chief executive officer.

View the state employment data by rank and state.  View state employment map.

Contacts:
Brian Turmai
(703) 459-0238
Email Contact




Review Article Be the first to review this article
SolidCAM: Program your CNCs directly inside your existing CAD system.


Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Re-Use Your CAD: The ModelCHECK Handbook
Jobs
Senior Structural Engineer for Design Everest at San Francisco, CA
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
GIS Analyst II for Air Worldwide at Boston, MA
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise