New XMC Modules Feature Xilinx® Artix®-7 FPGA

Acromag's new XMC-7A200 user-configurable Artix-7 FPGA modules are designed for applications requiring low-power without sacrificing high performance

WIXOM, Mich., June 17, 2015 — (PRNewswire) — Acromag's new XMC-7A200 is a XMC mezzanine module enhanced with Xilinx® Artix® -7 FPGA for low-power consumption and exceptional 128M x 16-bit Quad DDR3 SDRAM processing performance. Reconfigurable Artix-7 FPGA is possible via a direct download into the Flash configuration memory over the PCIe bus or the JTAG port. Four-lane high-speed serial interface on rear P15 connector for PCI Express Gen 1/2 (standard), Serial RapidI/O, and Xilinx Aurora implementations are supported. Rear I/O provides 8-lane high-speed serial interface on the P16 XMC port. SelectI/O or LVDS pairs plus global clock pairs direct to FPGA via rear P4 or P16 port. The FPGA serves as a co-processor applying custom logic and algorithms to streams of remote sensor data. Typical applications include hardware simulation, communications, in-circuit diagnostics, military servers, signal intelligence, and image processing. Designed and manufactured in the USA, lead-free modules are available beginning at $2,295.

XMC-7A200 Artix(R)-7 FPGA Modules

"In combination with the new Kintex®-7 series, the new XMC-7A Artix®-7 family further expands Acromag's offer of FPGA products. The XMC-7A will provide users an unbeatable lower-end combination of capabilities; lower power consumption, excellent functionality and a balanced mix of I/O, all based on Xilinx's® latest Vivado® development package," announced Russ Nieves, Acromag's Director of Embedded Solutions.

Build options include XC7A200T FPGA device with plug-in I/O or conduction-cooled for extended temperature. An engineering design kit provides user with basic information required to develop a custom FPGA program. Software support packages are available for VxWorks® 32-bit, Windows® DLL, and Linux™.

About Acromag
Founded in 1957, Acromag, Inc. is an engineering and manufacturing company of hi-tech industrial electronics. They are an international corporation with a world headquarters near Detroit, Michigan and a global network of sales representatives and distributors. Acromag is focused on developing embedded computing solutions that provide the best long term value in the industry. Acromag offers a complete line of embedded computing and I/O solutions including bus boards, single-board computers, FPGA modules, embedded computers, COM Express, mezzanine modules, wiring accessories, and software. Industries served include military, aerospace, manufacturing, transportation, utilities, and scientific research laboratories.

For more information about Acromag products, call Inside Sales at (248) 295-0310 or Marketing Communications at (248) 295-0310. The web site is www.acromag.com.

All trademarks are the property of their respective owners.

Photo - http://photos.prnewswire.com/prnh/20150617/223853

To view the original version on PR Newswire, visit: http://www.prnewswire.com/news-releases/new-xmc-modules-feature-xilinx-artix-7-fpga-300100860.html

SOURCE Acromag

Contact:
Acromag
Sales - Inside Sales Department (e-mail: Email Contact Editorial - Karen Haldenwanger, Mktg. Mgr. ( Email Contact
Web: http://www.acromag.com




Review Article Be the first to review this article

Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Siemens Goes ECAD With Mentor Graphics Acquisition
Jobs
Mechanical Engineer for IDEX Corporation at West Jordan,, UT
Senior Structural Engineer for Design Everest at San Francisco, CA
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
GIS Analyst II for Air Worldwide at Boston, MA
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017
SolidCAM: Program your CNCs directly inside your existing CAD system.



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise