Microsemi Achieves QML Class Q Qualification for RT ProASIC3 FPGAs

As First Flash-based FPGAs to Receive a QML Qualification, Designation Validates Quality and Reliability of the Company's Devices

ALISO VIEJO, Calif., May 28, 2015 — (PRNewswire) —  Microsemi Corporation (Nasdaq: MSCC), a leading provider of semiconductor solutions differentiated by power, security, reliability and performance, today announced its radiation-tolerant (RT) RT ProASIC®3 field programmable gate arrays (FPGAs) have been qualified by the U.S. Defense Logistics Agency (DLA) as Qualified Manufacturers List (QML) Class Q. The devices are also the first flash-based FPGAs to receive a QML qualification.

Microsemi Corporation.

"The QML qualification for our RT Pro+ASIC3 FPGAs validates the quality and reliability of these devices, as well as our qualification and manufacturing screening processes—putting these products in a class of their own," said Ken O'Neill, director of marketing, space and aviation at Microsemi. "This qualification opens the door for many Microsemi space customers to take advantage of the reprogrammability and easy prototyping of these devices, without the requirement to provide the extra paperwork necessary when using non-qualified products."

Microsemi's RT ProASIC3 FPGAs are the first devices of their type to provide space-flight hardware designers a radiation-tolerant, reprogrammable, non-volatile logic integration solution. The FPGAs are based on low power 130 nanometer (nm) flash technology that provides immunity against damaging radiation-induced configuration upsets, while eliminating the need for additional code storage devices. The easily reprogrammable FPGAs also enable quick prototyping and design validation capabilities, which streamline product development efforts.

This new QML qualification aligns with the company's focus on delivering industry-leading space-level capabilities, technologies and products, and follows on the recently announced next generation  RTG4 family of FPGAs. RTG4 uses a low power flash process and is immune to changes in configuration due to radiation effects. Complementing its leadership in space FPGA technology, Microsemi is increasing its value as a systems solution provider with a new family of radiation-hardened analog mixed signal ICs for telemetry and motor control, such as the recently announced  LX7730 telemetry controller, as well as with a variety of radiation-hardened DC-to-DC converters, precision time and frequency solutions, linear and point of load (POL) hybrids, custom hybrid solutions and comprehensive radiation-hardened discretes. For more information about Microsemi's product portfolio for space applications, visit  http://www.microsemi.com/applications/space.

Upcoming Space Forums
Microsemi will be hosting a series of one-day Space Forum events in five U.S. and international locations during June and August 2015. Microsemi's technical experts, along with the company's partners, will present today's leading space-related products, capabilities, technology roadmaps and solutions. Microsemi's Space Forum is open to the company's customers, as well as other space industry architects and engineers. For more information or to register, visit http://www.microsemi.com/spaceforum. For questions, email Microsemi at Email Contact.

RT ProASIC3 Availability
Microsemi's RT ProASIC3 FPGAs are available now in a variety of packages. As of 2014, the RT ProASIC3 is controlled under EAR, and not ITAR, benefiting international customers by imposing fewer restrictions when these devices are exported. For more information, visit http://www.microsemi.com/products/fpga-soc/radtolerant-fpgas/rt-proasic3 or contact Microsemi at Email Contact.

About Microsemi
Microsemi Corporation (Nasdaq: MSCC) offers a comprehensive portfolio of semiconductor and system solutions for communications, defense & security, aerospace and industrial markets. Products include high-performance and radiation-hardened analog mixed-signal integrated circuits, FPGAs, SoCs and ASICs; power management products; timing and synchronization devices and precise time solutions, setting the world's standard for time; voice processing devices; RF solutions; discrete components; security technologies and scalable anti-tamper products; Ethernet solutions; Power-over-Ethernet ICs and midspans; as well as custom design capabilities and services. Microsemi is headquartered in Aliso Viejo, Calif, and has approximately 3,600 employees globally. Learn more at www.microsemi.com.

Microsemi and the Microsemi logo are registered trademarks or service marks of Microsemi Corporation and/or its affiliates. Third-party trademarks and service marks mentioned herein are the property of their respective owners.

"Safe Harbor" Statement under the Private Securities Litigation Reform Act of 1995: Any statements set forth in this news release that are not entirely historical and factual in nature, including without limitation statements related to its RT ProASIC3 FPGAs being qualified by the U.S. Defense Logistics Agency as Qualified Manufacturers List Class Q, and its potential effects on future business, are forward-looking statements. These forward-looking statements are based on our current expectations and are inherently subject to risks and uncertainties that could cause actual results to differ materially from those expressed in the forward-looking statements. The potential risks and uncertainties include, but are not limited to, such factors as rapidly changing technology and product obsolescence, potential cost increases, variations in customer order preferences, weakness or competitive pricing environment of the marketplace, uncertain demand for and acceptance of the company's products, adverse circumstances in any of our end markets, results of in-process or planned development or marketing and promotional campaigns, difficulties foreseeing future demand, potential non-realization of expected orders or non-realization of backlog, product returns, product liability, and other potential unexpected business and economic conditions or adverse changes in current or expected industry conditions, difficulties and costs of protecting patents and other proprietary rights, inventory obsolescence and difficulties regarding customer qualification of products. In addition to these factors and any other factors mentioned elsewhere in this news release, the reader should refer as well to the factors, uncertainties or risks identified in the company's most recent Form 10-K and all subsequent Form 10-Q reports filed by Microsemi with the SEC. Additional risk factors may be identified from time to time in Microsemi's future filings. The forward-looking statements included in this release speak only as of the date hereof, and Microsemi does not undertake any obligation to update these forward-looking statements to reflect subsequent events or circumstances.

Logo - http://photos.prnewswire.com/prnh/20110909/MM66070LOGO

 

To view the original version on PR Newswire, visit: http://www.prnewswire.com/news-releases/microsemi-achieves-qml-class-q-qualification-for-rt-proasic3-fpgas-300089860.html

SOURCE Microsemi Corporation

Contact:
Microsemi Corporation
Farhad Mafie, VP Worldwide Product Marketing, 949-356-2399, and Beth P. Quezada, Director, Corporate Communications, 949-380-6102, Email: Email Contact
Web: http://www.microsemi.com




Review Article Be the first to review this article

Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Siemens Goes ECAD With Mentor Graphics Acquisition
Jobs
Mechanical Engineer for IDEX Corporation at West Jordan,, UT
GIS Analyst II for Air Worldwide at Boston, MA
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
Senior Structural Engineer for Design Everest at San Francisco, CA
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017
SolidCAM: Program your CNCs directly inside your existing CAD system.



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise