OPEN MIND at the International Paris Air Show 2015

hyperMILL® in the aerospace industry

Wessling (Germany), May 12, 2015 – CAM/CAD manufacturer OPEN MIND Technologies AG will be presenting its hyperMILL® software solution at the International Paris Air Show. This trade fair, which is taking place from 15 to 21 June in Le Bourget, France, is the biggest and most important meeting point for the global aerospace industry. OPEN MIND will be presenting its innovative CAM/CAD technologies for efficient manufacturing in Hall 2C on the joint stand of the German Aerospace Industries Association (BDLI).

There are high demands on manufacturing performance in the aerospace sector.  The focus is on topics such as weight reduction, reducing costs and increasing quality, reducing production times, machining new materials and materials that are difficult to machine, and on the use of certifiable processes. As a pioneer in 5-axis technology, OPEN MIND offers intelligent solutions for these challenges with its hyperMILL® CAM/CAD system. hyperMAXX® provides users with a high-efficiency, high-performance cutting strategy that achieves much higher material removal rates and also protects tools and machinery at the same time. The roughing module is fully integrated into hyperMILL® and combines optimal milling paths, maximum material removal and the shortest possible machining times. The strategy for extremely rapid material removal, even with materials that are difficult to cut, is available for 2D, 3D and 5-axis milling tasks.

Another strategy for mastering the typical challenges in the aerospace industry is 5-axis shape offset roughing and finishing. This function makes it possible to machine curved surfaces with a consistent allowance. The use of automation ensures that the milling paths always follows the base surface. This results in optimal surface quality with reduced programming effort.

Automated programming

One of the outstanding features of hyperMILL® is the numerous automation options, with which extremely efficient machining of complex workpieces is easy to implement. The user can also use these options for machining multi and single blades. Special hyperMILL® packages for impeller, blisk and turbine blade machining provide programmers with a wide range of capabilities.

Always on the safe side

A prerequisite for safe machining is reliable collision monitoring and
avoidance, not just for 5-axis machining. hyperMILL® detects collisions and provides efficient solutions for avoiding collisions.

Continuous, flexible and process-reliable

Any workpiece can be programmed extremely easily and flexibly with hyperMILL®. All strategies for 2D, 3D, HSC, 5-axis machining and mill-turning are available in a single user interface. As far as the user is concerned, this means continuous processes and minimised machining times for maximum process safety, cost-effectiveness and quality.

Available images

The following images can be downloaded in a printable format at:


hyper MAXX®: The HPC strategy for high-volume material removal


Source of images (1): OPEN MIND

About OPEN MIND Technologies AG

OPEN MIND Technologies AG is a leading developer of CAM/CAD software and postprocessors for designing and manufacturing complex moulds and parts. OPEN MIND is one of the world’s top five providers of CAM solutions according to the NC Market Analysis Report 2015 compiled by the CIMdata market research company.

OPEN MIND offers an extensive selection of products ranging from 2D feature-oriented solutions for milling standard parts through to software for 5-axis simultaneous machining.

OPEN MIND Technologies AG is represented in all key markets in Asia, Europe and America with its hyperMILL® software, which is used in the automotive, tool and mould manufacturing, mechanical engineering, medical and aerospace, and watch and jewellery industries.

OPEN MIND Technologies AG is a Mensch und Maschine company (

OPEN MIND Technologies USA, Inc.
1492 Highland Avenue, Unit 3
Needham MA 02492
Phone: +1  339  225  4557 office
Phone: +1  888  516 1232 x0 toll-free
Fax: +1  270  912 5822
E-mail: Email Contact

OPEN MIND Technologies UK Ltd., Oxford
Units 1 and 2
Bicester Business Park, Telford Road, Biceste
Oxfordshire OX26 4LN, England
Fon: +44  1869  290 003
Fax: +44  1869  369 429
E-mail: Email Contact

Head office:
OPEN MIND Technologies AG, Argelsrieder Feld 5, 82234 Wessling, Germany
Tel.: (+49-8153) 933-500,
Fax: (+49-8153) 933-501
E-mail: Email Contact

Press contact:
HighTech communications GmbH
Brigitte Basilio
Grasserstrasse 1c
80339 Munich
Tel.: (+49-89) 500778-20
Fax: (+49-89) 500778-78
E-mail: Email Contact

Review Article Be the first to review this article
Autodesk - DelCAM

Featured Video
GIS Analyst for City of Elk Grove at Elk Grove, CA
Upcoming Events
Electric&Hybrid Aerospace Technology Symposium 2016 at Conference Centre East. Koelnmesse (East Entrance) Messeplatz 1 Cologne Germany - Nov 9 - 10, 2016
Autodesk University Las Vegas at Las Vegas NV - Nov 15 - 17, 2016
TurboCAD pro : Limited Time offer

Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise