Tri-Mack Expands Capabilities to Meet Aerospace Supply Chain Challenges

   Responds with new lightweight materials, aggressive turnaround and strong NPI support 

Bristol, R.I., April 13, 2015—The aerospace industry is thriving—and is predicted to continue on an upward trajectory into the next decade. Demand for new aircraft is expected to support annual industry-wide growth of approximately seven percent, an increase of more than 50 percent by 2021. 

As the expansion continues, new materials development is emerging as a clear winner in the search for more cost-effective solutions for keeping fuel costs down as passenger-miles soar.  Industry customers are increasingly asking their suppliers to provide lighter, yet stronger composite material alternatives to aircraft components that have traditionally been made from metal.

Tri-Mack Plastics Manufacturing Corporation, a leading manufacturer of high-performance engineered components, has found the formula for meeting their clients’ needs for lower cost, lightweight, high-quality thermoplastic parts and assemblies through a combination of innovative technology, materials expertise and customer collaboration. While other suppliers have downsized and outsourced, the 40 year-old company recently hired almost three dozen new employees, opened a new Advanced Composites Center, and is already planning to expand its onsite facilities in Bristol, R.I.

The Advanced Composites Center is dedicated to processing the latest thermoplastic composites (TPCs) that offer Tri-Mack’s customers in aerospace and other industries lightweight, robust, alternatives to heavier, more traditional materials. Key benefits of TPCs include:

 

  • TPCs are continuous fiber reinforced materials with exceptional mechanical properties.  Tri-Mack works with prepreg tape and fabric—unidirectional and woven carbon and glass fibers in a high temperature polymer matrix—PEEK, PPS, PEI, etc.
  • TPCs offer 10x the mechanical properties of injection molded plastics and are up to 70% lighter than metals. 
  • Tri-Mack uses automated equipment to lay-up the unidirectional prepreg tape, consolidate low void laminates and thermoform complex shapes.  Lay-ups can be tailored to align fiber orientation to optimize the performance of the finished part.
  • TPCs are processed in minutes, not the hours required for thermoset composites. Unlike thermosets, TPCs’ cost-effective manufacturing does not require freezers, autoclaves, or hand lay-ups.
  • Tri-Mack produces hybrid components that combine the performance of TPCs with injection molding to create complex assemblies. Hybrids feature the key advantages of both processes: the outstanding mechanical properties of thermoplastic composites and the low cost of injection molding.

Tri-Mack recently completed a project to qualify over 200 part numbers for a large aerospace OEM—at an accelerated schedule. By converting the parts from steel to TPC, the company was also able to achieve an average weight savings of 40% percent for its customer.

“A tremendous amount of development goes into every aerospace project,” says Will Kain, Tri-Mack president. “Naturally, at times this strains capacity at the OEM level. We’ve always viewed our role as that of a valued supply chain partner, helping our clients complete their projects and meet their weight-savings goals. One key aspect of the Tri-Mack formula is that we’ve become an extension of our customers’ engineering teams.

“In this partner role, we are helping customers by increasing our facility size, staff, and by adding cutting-edge research and technology,” states Kain. “Tri-Mack is more than a component manufacturer; we’re managing processes, data and aggressive new product introduction schedules. This leads to success for all the parties involved.”

Tri-Mack provides their clients with access to an impressive technology lineup—which, in addition to their Advanced Composites Center, includes injection and compression molding, precision multi-axis machining, tool making, and a robotic injection molding cell—all backed by years of experience. From design for manufacturing to metal-to-plastic conversion, Tri-Mack’s main objective is that each part they produce meets their clients’ exact needs, whatever the materials involved.

“Going forward, Tri-Mack’s continuous investment in capital equipment, technology and people ensures that we will be able to further increase our capacity, as well as offer our customers the very latest manufacturing technologies,” says Kain.

In addition to serving the aerospace industry, Tri-Mack also provides high-performance parts for critical applications in the chemical processing, medical, electronics, and industrial equipment markets.

About Tri-Mack Plastics Manufacturing Corporation

Tri-Mack Plastics Manufacturing Corporation is an innovative engineering and manufacturing company specializing in high temperature thermoplastics and thermoplastic composites. For 40 years, customers have relied on Tri-Mack to identify the best material, part design, and manufacturing process for their critical applications. Engineering expertise, cutting-edge technology and a commitment to quality enable Tri-Mack to support projects from initial concept to commercial production. Tri-Mack’s award-winning manufacturing capabilities include automated composite processing, injection molding, tool making, multi-axis machining, bonding and assembly.  ISO 9001:2008, AS9100 and NADCAP certified, Tri-Mack serves the aerospace, industrial equipment, chemical processing and medical industries.   For more information, please visit www.trimack.com. The best part is your success.TM

Contact:

Tom Kneath

Director of Sales and Marketing

Tri-Mack Plastics Manufacturing Corporation

401-253-2140 x17

Email Contact

 

Editorial contact:

Lynn Manning or Miles Parker

Parker Group

401-272-1510

Email Contact




Review Article Be the first to review this article

Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Re-Use Your CAD: The ModelCHECK Handbook
Jobs
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
GIS Analyst II for Air Worldwide at Boston, MA
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017
SolidCAM: Program your CNCs directly inside your existing CAD system.



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise