Efficient Power Conversion Corporation (EPC) Publishes Wireless Power Handbook, a Guide to Designing an Efficient Amplifier for a Wireless Power Transfer System

Wireless Power Handbook is a guide to designing an efficient amplifier for a wireless power transfer system, taking advantage of the superior performance of gallium nitride power transistors

EL SEGUNDO, Calif. — (BUSINESS WIRE) — March 12, 2015 — Efficient Power Conversion Corporation ( www.epc-co.com) announces the publication of a practical engineering handbook designed to provide power system design engineers valuable experiences and points of reference critical to understanding and designing highly efficient wireless power systems using gallium nitride-based transistors. As a supplement to EPC’s GaN Transistors for Efficient Power Conversion, this new practical guide provides step-by-step analysis on the use of GaN transistors in wireless power transfer.

Highly resonant wireless power transfer using eGaN FETs has proven to be a viable path to efficient, convenient wireless power. The use of magnetic fields contributes ease of use and robustness, but most importantly, it is considered safe. However, the implementation of this technology poses many challenges to power system designers. At the heart of highly resonant wireless power is the amplifier, which drives the coils that generate the magnetic field. eGaN FETs have, in part, driven the wireless power revolution by offering high efficiency, robustness to operating conditions and are easy to use.

This handbook addresses the many design aspects needed for a wireless power transfer system. Topics covered include how to effectively compare component devices, such as eGaN FETs and MOSFETs, when used in an amplifier design. This comparison, complete with experimental verification, illustrates the superiority of eGaN FETs over MOSFETs. Wireless power solutions rely on ease-of-use for consumer convenience and eGaN FET performance ensures that the requisite challenges associated with ease-of-use can be met using the simplest and most cost effective solutions.

Alex Lidow, Efficient Power Conversion CEO points out that, “Magnetic field technology may have caught up with the concept of wireless power, but the implementation poses many challenges to power system designers. Based upon experimental results, this handbook shows that the ZVS Class D topology, fitted with eGaN FETs, exhibited superior performance as compared to the other amplifiers.”

Wireless Power Handbook: a Supplement to GaN Transistors for Efficient Power Conversion is available for $39.95 and can be purchased from Digi-Key ( www.digikey.com).

About the Author

Michael DeRooij, is Executive Director of Applications Engineering at Efficient Power Conversion Corporation (EPC). Prior to joining EPC, he worked at Windspire Energy and the GE Global Research Center. Dr. de Rooij received his Ph.D. from the Rand Afrikaans University and conducted postdoctoral studies on power electronic integration, packaging and a high frequency MOSFET Gate-driver at the Center for Power Electronic Systems (CPES) at Virginia Tech. He is a Senior Member of the IEEE and has authored over 25 publications, most recently co-authoring GaN Transistors for Efficient Power Conversion. He has been granted 21 US and International patents and 19 US and International pending patent applications.

About EPC

EPC is the leader in enhancement mode gallium nitride based power management devices. EPC was the first to introduce enhancement-mode gallium-nitride-on-silicon (eGaN) FETs as power MOSFET replacements in applications such as DC-DC converters, wireless power transfer, envelope tracking, RF transmission, power inverters, remote sensing technology (LiDAR), and class-D audio amplifiers with device performance many times greater than the best silicon power MOSFETs.

www.epc-co.com

eGaN is a registered trademark of Efficient Power Conversion Corporation.



Contact:

Efficient Power Conversion Corporation
Joe Engle, 310-986-0350
Email Contact




Review Article Be the first to review this article
HP

ACE2017

Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
APSX Bringing Injection Molding To The Desktop
Jobs
Inside Sales for SolidCAM at Newtown, PA
Director of Mechanical Engineering for Velodyne LIDAR at Morgan Hill, CA
Architetural Project Manager for DRA Architects at Irvine, CA
Imagery Analyst for ARA at Albuquerque, NM -1229, NM
Sr. GIS Technical Analyst for Southern California Edison SCE Transmission and Distribution Organization at Rosemead, CA
Database Specialist for MDA Information Systems LLC at Gaithersburg, MD
Upcoming Events
DriveWorks World at The Barley Store Laskey Lane Thelwall Cheshire United Kingdom - Mar 6 - 9, 2017
JEC World 2017 at Paris Nord Villepinte Exhibition Centre Paris France - Mar 14 - 16, 2017
SOLIDWORKS funding event – Leicester at The National Space Centre, Exploration Dr, Leicester, LE4 5NS Leicester United Kingdom - Mar 17, 2017
ACE 2017 Nashville at Nashville TN - Mar 21 - 23, 2017



Internet Business Systems © 2017 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise