Juniper Networks Gains Dramatic Throughput and Performance Advantages with Cadence Innovus Implementation System

SAN JOSE, Calif., March 10, 2015 — (PRNewswire) — Cadence Design Systems, Inc. (NASDAQ: CDNS) today announced that Juniper Networks (NYSE: JNPR) has utilized Cadence® Innovus™ Implementation System to improve turnaround time (TAT) for physical implementation of their most complex 28-nanometer (nm) intellectual property (IP) for networking applications. The networking company was able to achieve throughput of more than 1.8 million cells per day while also improving out-of-the-box design performance by 15 percent.

Cadence Logo.

The Innovus Implementation System incorporates the advanced new GigaPlace placement engine and multi-threaded placement optimization, which enabled Juniper Networks to meet its critical performance parameters. The full-flow multi-threading enhancements enabled full utilization of 8- and 16-CPU machines that resulted in the optimal throughput on the multi-million-cell high-performance networking IP blocks.

"We needed to create larger blocks on the last chip, but the excessive turnaround time with our previous tool made this impractical with our aggressive design schedule," said Debashis Basu, ‎SVP Engineering, Silicon and Systems Engineering at Juniper Networks. "Our next system-on-chip (SoC) projects will be on a 16nm process, and the Innovus Implementation System can enable much larger blocks than previously possible, decreasing area and top-level complexity." 

"Designs with just a few issues can cost customers a month in the design schedule by the time the problems are discovered, fixed and then rerun," said Dr. Anirudh Devgan, senior vice president of the Digital and Signoff Group at Cadence. "The Innovus Implementation System is helping Juniper Networks to decrease the time to a clean design by getting high-quality results into the designer's hands much sooner. As Juniper embarks on its new 16nm SoC designs, the Innovus Implementation System can provide the desired turnaround time required to meet tight deadlines while improving overall engineering productivity."

The Innovus Implementation System is a next-generation physical implementation solution that enables developers to deliver high-quality designs with best-in-class power, performance, and area (PPA) while accelerating time to market. For more information on the new solution, please visit http://www.cadence.com/news/innovus. Also, see today's related press release titled, "Cadence Introduces Innovus Implementation System, Delivering Best-in-Class Results with Up to 10X Reduction in Turnaround Time," at http://www.cadence.com/cadence/newsroom/press_releases/pages/pr.aspx?xml=031015_Innovus.

About Cadence

Cadence enables global electronic design innovation and plays an essential role in the creation of today's integrated circuits and electronics. Customers use Cadence software, hardware, IP and services to design and verify advanced semiconductors, consumer electronics, networking and telecommunications equipment, and computer systems. The company is headquartered in San Jose, Calif., with sales offices, design centers and research facilities around the world to serve the global electronics industry. More information about the company, its products and its services is available at http://www.cadence.com/.

© 2015 Cadence Design Systems, Inc. All rights reserved worldwide. Cadence and the Cadence logo are registered trademarks and Innovus is a trademark of Cadence Design Systems, Inc. in the United States and other countries. All other trademarks are the property of their respective owners.

For more information, please contact:
Cadence Newsroom
408-944-7039
Email Contact

Logo - http://photos.prnewswire.com/prnh/20140102/SF39436LOGO

 

To view the original version on PR Newswire, visit: http://www.prnewswire.com/news-releases/juniper-networks-gains-dramatic-throughput-and-performance-advantages-with-cadence-innovus-implementation-system-300047127.html

SOURCE Cadence Design Systems, Inc.

Contact:
Cadence Design Systems, Inc.
Juniper Networks
Web: http://www.cadence.com




Review Article Be the first to review this article
SolidCAM: 10K CAM Contest

Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
GE Additive’s Big Plans For Metal AM
Jobs
Mechanical Engineer II - Requisition ID 090445 for L3 Technologies at New York, NY
ECAD Designer - Data Connectivity for Delphi at Auburn Hills, MI
Estimator / Bidder for Rulon International at Saint Augustine, FL
Upcoming Events
33rd Annual Coordinate Metrology Society Conference at Snowbird UT - Jul 17 - 21, 2017
EMO Hannover 2017 at Hannover Germany - Sep 18 - 23, 2017
The 30th Annual Integrated Process Excellence Symposium & Training at Wyndham Grand Bonnet Creek Resort Orlando FL - Sep 18 - 20, 2017
Additive Manufacturing Conference 2017 at Knoxville Convention Center 701 Henley Street Knoxville TN - Oct 10 - 12, 2017



Internet Business Systems © 2017 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise