MakerBot and SUNY New Paltz Celebrate One-Year Anniversary of SUNY New Paltz MakerBot Innovation Center

MakerBot CEO Jenny Lawton to Discuss 3D Printing Technology at Anniversary Celebration on February 25, 2015

BROOKLYN, N.Y. — (BUSINESS WIRE) — February 19, 2015 — One year ago, the State University of New York at New Paltz (SUNY New Paltz) became the first university in the U.S. to open a MakerBot® Innovation Center. A MakerBot Innovation Center is a large-scale installation of MakerBot Replicator® 3D Printers and supporting devices that empowers organizations and schools to innovate faster, increase collaboration and compete more effectively. Since SUNY New Paltz opened its MakerBot Innovation Center in February 2014, the university has used it to help establish the Hudson Valley Advanced Manufacturing Center (HVAMC) as a premiere hub for advanced manufacturing technology in the Hudson Valley, garnering industry interest and securing funding for further expansion. The SUNY New Paltz MakerBot Innovation Center will celebrate its one-year anniversary as part of the HVAMC on February 25. In honor of the one-year anniversary, MakerBot CEO Jenny Lawton will give a talk on the current state and the future of the 3D printing industry in a presentation entitled “12 Years from Now,” on Wednesday, February 25, at 4:30 p.m., in Lecture Center 100, at SUNY New Paltz.

The MakerBot Innovation Center helped jumpstart SUNY New Paltz's 3D printing initiative, which has e ...

The MakerBot Innovation Center helped jumpstart SUNY New Paltz's 3D printing initiative, which has enjoyed tremendous interest from students, faculty and the surrounding business community. (Photo: Business Wire)

According to Donald Christian, president of SUNY New Paltz, the MakerBot Innovation Center helped jumpstart SUNY New Paltz’s 3D printing initiative, which has enjoyed tremendous interest from students, faculty and the surrounding business community. With the MakerBot Innovation Center, the university quickly forged public-private partnerships with industry leaders to create a vibrant innovation hub that serves both students and the local business community in unprecedented ways. Among many milestones, SUNY New Paltz was awarded a $10 million NYSUNY 2020 Challenge Grant by Governor Andrew Cuomo in the fall of 2014 to establish an Engineering Innovation Hub and secured $850,000 in capital funding for a new 3D printing laboratory.

“The MakerBot Innovation Center has been hugely successful here at SUNY New Paltz, and the interest from both students and industry has exceeded even our wildest expectations,” said Dan Freedman, dean of the School of Science and Engineering. “MakerBot put us on the map as an innovation leader. We’ve seen huge interest from companies looking for talent with additive manufacturing experience, and the number of inquiries we get from local business and industry grows daily. Students who learn about 3D printing at SUNY New Paltz will have a significant competitive advantage when they start looking for jobs after they graduate.”

At its School of Science and Engineering, SUNY New Paltz has developed a 3D printing curriculum as part of its Digital Design and Fabrication (DDF) class. This class brings together art and engineering majors to collaborate with local entrepreneurs and businesses on Real-Time Prototyping™, model making and small-scale creative and manufacturing projects. The MakerBot Innovation Center, part of the HVAMC, is already providing digital design and fabrication expertise to about 50 businesses and entrepreneurs throughout the region.

“We’re really proud of the success that SUNY New Paltz has had with its MakerBot Innovation Center in just one year and how they were able to use 3D printing to foster science, technology, engineering and math (STEM) education,” said Jenny Lawton, CEO of MakerBot. “The interest from companies that are looking to hire talent with additive manufacturing experience is increasing significantly. SUNY New Paltz has found a unique way of satisfying that demand by bringing together art and engineering students with local businesses through 3D printing. The results are inspiring, and we can’t wait to see what they will be able to achieve in the future.”

The MakerBot Innovation Center has also helped SUNY New Paltz engage the local community and educate the public about the possibilities of 3D printing. Workshops for K-12 educators have attracted a wide variety of teachers, from art to science, who have an interest in digital design and fabrication and in utilizing these new technologies in the classroom. SUNY New Paltz also offers a two-semester course in digital design and fabrication to nondegree students from the community.

Innovative 3D printing projects that have come out of the MakerBot Innovation Center at SUNY New Paltz range from prosthetics to a motorcycle safety product to an industrial venting system. One of the outstanding projects completed this past year is a 3D printed “ robohand” that enables a six-year-old boy without any fingers on his left hand to grasp objects. Another is the Life Grip, a motorcycle grip that allows drivers to actuate the horn without taking their eyes off the road. The inventor, Lewis Donnelly, prototyped the Life Grip on a MakerBot Replicator 2X Experimental 3D Printer. During the development process, Lewis discovered that changing the level of infill of the 3D print had an effect on the level of vibration that is transmitted through the grip; as a result, he was able to make the grip safer by adjusting it for different levels of fatigue. This discovery was possible only because the rapid nature of 3D printing allowed him to quickly make and test multiple iterations of his product. Graduate student Katherine Wilson paid $75 to make a lamp housing on an industrial 3D printer before coming to SUNY New Paltz. On a MakerBot Replicator 3D Printer, the same part cost $0.50 and took two hours.

1 | 2  Next Page »



Review Article Be the first to review this article

Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Siemens Goes ECAD With Mentor Graphics Acquisition
Jobs
Mechanical Engineer for IDEX Corporation at West Jordan,, UT
GIS Analyst II for Air Worldwide at Boston, MA
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
Senior Structural Engineer for Design Everest at San Francisco, CA
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017
SolidCAM: Program your CNCs directly inside your existing CAD system.



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise