Complete USB Human Interface Design Platform

Digital Core Design, an IP Core provider and a System-on-Chip design house from Poland, introduced the USB HID Design Platform. It is complete and integrated solution which targets almost all aspects of USB based Human Interface Devices. Apart from that, DCD’s solution enhances Internet of Things (IoT) projects thanks to its software stack optimized with ultra-low power DP8051 8.bit CPU.

Bytom, Poland, 2nd of February, 2015. 

Highlights:

  • DUSB2 peripheral controller, designed to support 12 Mb/s "Full Speed" (FS) and 480 Mb/s "High Speed" (HS) serial data transmission rates
  • DP8051XP ultra high performance, speed optimized, fully customizable 8051 8-bit microcontroller with built-in DoCDTM debug IP core
  • Human Interface Devices software stack optimized for DP8051XP 8-bit CPU
  • FPGA board with ready to use, preprogrammed example HID application
  • HAD2 – DoCDTM Hardware Assisted Debugger board
  • DoCDTMDebug Software
  • DoCDTMdriver for Keil development software
  • DoCDTM driver for IAR development software 

Digital Core Design’s USB HID Design Platform is a complete and integrated solution createdto enhance USB based Human Interface Devices design experiences. Mouses, keyboards, tablets but also hundreds of other e-quipment is based on stable USB connection. So it’s not a secret that a true programmable embedded system-on-chip integrating configurable analog and digital peripheral functions, is one of the biggest challenges engineers ever faced. – Our Human Interface Devices Design Platform offers the highest level of testability, conformance and verification – explains Tomasz Krzyzak, DCD’s Vice President, Member of the Board of Directors. This specific SoC seems to be the leading combination of all crucial elements implemented in one IP Core.

The USB HID Design Platform supports UTMI Transceiver Macrocell Interface as well as low cost Full Speed Macrocells. It’s been stacked with the DP8051 DCD’s IP Core, which guarantees 100% software compatibleness with ’51 industry standard. The same engineers gets up to 256 bytes of internal (on chip) Data Memory, up to 64K bytes of internal (on chip) or external (off chip) Program Memory. Last but not least, along with up to 16M bytes of external (off chip) Data Memory, goes a programmable Program Memory Wait States for wide range of memories speed. 

More information http://dcd.pl/ipcore/93/hid-platform/ 

Information about Digital Core Design:

The company founded in 1999, since the beginning stands in the forefront of the IP Core market. High specialization and profound customer service enabled to introduce more than 70 different architectures. Among them is the world’s fastest 8051 IP Core, the DQ80251, which is more than 66 times faster than the standard solution. As an effect, over 300 hundred licensees have been sold to more than 500 companies worldwide. Among them are the biggest enterprises like e.g. Sony, Siemens, General Electric and Toyota. But a lot of DCD’s customers are small businesses, R&D laboratories or front/back end offices, which require exact solution tailored to their project needs. Rough estimations say that more than 270 000 000 devices around the globe have been based on Digital Core Design’s IP Cores. 




Review Article Be the first to review this article

Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Siemens Goes ECAD With Mentor Graphics Acquisition
Jobs
Mechanical Engineer for IDEX Corporation at West Jordan,, UT
Senior Structural Engineer for Design Everest at San Francisco, CA
GIS Analyst II for Air Worldwide at Boston, MA
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017
SolidCAM: Program your CNCs directly inside your existing CAD system.



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise