EDA Consortium Reports Revenue Increase For Q3 2014

SAN JOSE, Calif., Jan. 16, 2015 — (PRNewswire) —  The EDA Consortium (EDAC) Market Statistics Service (MSS) today announced that the Electronic Design Automation (EDA) industry revenue increased 5.7 percent for Q3 2014 to $1828.1 million, compared to $1729.3 million in Q3 2013. Sequential EDA revenue for Q3 2014 increased 4.0 percent compared to Q2 2014, while the four-quarters moving average, which compares the most recent four quarters to the prior four quarters, increased by 5.6 percent.

"Geographically, all regions except Japan continue to show solid revenue increases, with record revenues in the Americas and Asia-Pacific. Q3 represents the 19th consecutive quarter of EDA expansion," said Walden C. Rhines, board sponsor for the EDAC MSS and chairman and CEO of Mentor Graphics. "PCB was the only tool category with positive growth in the quarter. PCB license growth and double-digit growth in semiconductor IP and overall services were the primary drivers."

Companies that were tracked employed 31,648 professionals in Q3 2014, an increase of 5.6 percent compared to the 29,967 people employed in Q3 2013, and up 1.2 percent compared to Q2, 2014.

The complete, quarterly MSS report, containing detailed revenue information broken out by both categories and geographic regions, is available to members of the EDA Consortium.

Revenue by Product Category
The largest category, Computer Aided Engineering (CAE), generated revenue of $604.5 million in Q3 2014, which represents a 6.1 percent decrease compared to Q3 2013. The four-quarters moving average for CAE increased 0.7 percent.

IC Physical Design & Verification revenue was $357.8 million in Q3 2014, a 1.4 percent decrease compared to Q3 2013. The four-quarters moving average decreased 0.5 percent.

Printed Circuit Board and Multi-Chip Module (PCB & MCM) revenue of $167.4 million for Q3 2014 represents an increase of 9.7 percent compared to Q3 2013. The four-quarters moving average for PCB & MCM increased 11.4 percent.

Semiconductor Intellectual Property (SIP) revenue totaled $586.1 million in Q3 2014, a 22.9 percent increase compared to Q3 2013. The four-quarters moving average increased 15 percent.

Services revenue was $112.4 million in Q3 2014, an increase of 20.2 percent compared to Q3 2013. The four-quarters moving average increased 6.4 percent.

Revenue by Region
The Americas, EDA's largest region, purchased $842.0 million of EDA products and services in Q3 2014, an increase of 9.2 percent compared to Q3 2013. The four-quarters moving average for the Americas increased 8.7 percent.

Revenue in Europe, the Middle East, and Africa (EMEA) was up 4.0 percent in Q3 2014 compared to Q3 2013 on revenues of $296.8 million. The EMEA four-quarters moving average increased 3.4 percent.

Third quarter 2014 revenue from Japan decreased 15.3 percent to $189.5 million compared to Q3 2013. The four-quarters moving average for Japan decreased 12.8 percent.

The Asia/Pacific (APAC) region revenue increased to $499.9 million in Q3 2014, an increase of 11.3 percent compared to the third quarter of 2013. The four-quarters moving average increased 12.2 percent.

The complete MSS report, available to the EDA Consortium members, contains additional detail for countries in the Asia/Pacific region.

About the MSS Report
The EDA Consortium Market Statistics Service reports EDA industry revenue data quarterly and is available to EDAC members. Both public and private companies contribute data to the report. Each quarterly report is published approximately three months after quarter close. MSS report data is segmented as follows: revenue type (product licenses and maintenance, services, and SIP), application (CAE, PCB/MCM Layout, and IC Physical Design & Verification), and region (the Americas, Europe Middle East and Africa, Japan, and Asia Pacific), with many subcategories of detail provided. The report also tracks total employment of the reporting companies.

About the EDA Consortium
The EDA Consortium is the international association of companies that provide design tools and services that enable engineers to create the world's electronic products used for communications, computer, space technology, medical, automotive, industrial equipment, and consumer electronics markets among others. For more information about the EDA Consortium, visit www.edac.org, or to subscribe to the Market Statistics Service, call 408-287-3322 or email Email Contact.

The information supplied by the EDA Consortium is believed to be accurate and reliable, but the EDA Consortium assumes no responsibility for any errors that may appear in this document. All trademarks and registered trademarks are the property of their respective owners.

Press Contacts:

Paul Cohen, EDA Consortium, 978-769-2106
Suzanne Graham, Mentor Graphics, 503-685-7789


To view the original version on PR Newswire, visit: http://www.prnewswire.com/news-releases/eda-consortium-reports-revenue-increase-for-q3-2014-300021459.html

SOURCE EDA Consortium

EDA Consortium
Web: http://www.edac.org

Review Article Be the first to review this article

SolidCAM: Program your CNCs directly inside your existing CAD system.

Featured Video
Senior Mechanical Engineer for Verb Surgical at Mountain View, CA
Principal Research Mechatronics Engineer for Verb Surgical at Mountain View, CA
CAD Systems Administrator for KLA-Tencor at Milpitas, CA
Industrial Designer Intern – Spring 2017 for Nvidia at Santa Clara, CA
Lead Geospatial Analyst for Alion at McLean, VA
Upcoming Events
SOLIDWORKS 2017 Launch Event – Walsall at Village Hotel Club, Walsall, WS2 8TJ Walsall United Kingdom - Mar 30, 2017
PI APPAREL Hong Kong 2017 at SHANGRI-LA KOWLOON 64 Mody Road Tsim Sha Tsui East Kowloon Hong Kong - Apr 5 - 6, 2017
SOLIDWORKS intro and hands on session – Slough at Baylis House, Slough, Berkshire, SL1 3PB Slough United Kingdom - Apr 7, 2017
Engineer 3D! Training + Technology Conference at Hyatt Regency Milwaukee 333 West Kilbourn Avenue Milwaukee WI - Apr 25 - 26, 2017

Internet Business Systems © 2017 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise