COOLCHIPS 2015 CALL FOR CONTRIBUTIONS

IEEE Symposium  on  Low-Power  and  High-Speed  Chips  'COOL Chips XVIII' 

http://www.coolchips.org 

          Dates and Location : 

=============================================================

                   April 13-15, 2015 

                   Yokohama Joho Bunka Center, Yokohama, Japan 

                   Yokohama Media & Communications Center, Yokohama, Japan

============================================================= 

COOL Chips is an International Symposium initiated in 1998 to present advancement of low-power and high-speed chips. The symposium covers leading-edge technologies in all areas of microprocessors and their applications.  COOL Chips XVIII is to be held in Yokohama on April 13-15, 2015, and is targeted at the architecture, design and implementation of chips with special emphasis on the areas listed below. All papers will be published online via IEEE Xplore. Authors of best papers will be recommended to submit an extended version to a COOL Chips special issue of IEEE Micro. 

Contributions are solicited in the following areas: 

- Low Power-High Performance Processors for:

          - Multimedia, Digital Consumer   Electronics, Mobile, Graphics, Encryption,  Robotics, Automotive, Networking, Medical, Healthcare, and Biometrics. 

- Novel Architectures and Schemes for:

           - Single Core, Multi/Many-Core, NoC, Embedded Systems, Reconfigurable           Computing, Grid, Ubiquitous, Dependable Computing, GALS and 3D Integration 

- Cool Software including:

           - Parallel Schedulers, Embedded Real-time Operating System, Binary Translations, Compiler Issues and Low Power Techniques. 

Proposals should consist of a title, an extended abstract (up to 3 pages) describing the product or topic to be presented and the name, job title, address, phone number, FAX number, and e-mail address of the presenter. The status of the product or topic should precisely be described. If this is a not-yet-announced product, and you would like to keep the submission confidential, please indicate it.  We will do our best to maintain confidentiality. Proposals will be selected by the program committee's evaluation of interest to the audience. 

Submission should be made by e-mail,  to  M. Ikeda, Program Chair, e-mail:                   submit_xviii@coolchips.org 

Author's kit can be obtained from:http://www.coolchips.org/ 

Author Schedule (Paper): 

          February 3, 2015   Extended Abstract Submission (by e-mail) 

          March   11, 2015   Acceptance Notified (by e-mail) 

          March   27, 2015   Final Manuscript Submission 

You are also invited to submit proposals for poster sessions by e-mail, to: K. Hashimoto, Poster Chair, e-mail:poster_xviii@coolchips.org 

 Author Schedule (Poster): 

          March   16, 2015   Poster Abstract Submission (by e-mail) 

          March   24, 2015   Poster Acceptance Notified (by e-mail) 

For more information, please visit http://www.coolchips.org 

For any questions, please contact the Secretariat:cool_xviii@coolchips.org




Review Article Be the first to review this article

Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Siemens Goes ECAD With Mentor Graphics Acquisition
Jobs
Mechanical Engineer for IDEX Corporation at West Jordan,, UT
Senior Structural Engineer for Design Everest at San Francisco, CA
GIS Analyst II for Air Worldwide at Boston, MA
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017
SolidCAM: Program your CNCs directly inside your existing CAD system.



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise