GLOBALFOUNDRIES and Cadence Deliver First SoC Enablement Solution Featuring ARM Cortex-A17 Processor in 28nm-SLP Process

GLOBALFOUNDRIES also tapes out second ARM Cortex-A17 processor using full Cadence digital implementation and signoff flow

SAN JOSE, Calif., Dec. 17, 2014 — (PRNewswire) — Cadence Design Systems, Inc. (NASDAQ: CDNS), a leader in global electronic design innovation, and GLOBALFOUNDRIES, a leading provider of advanced semiconductor manufacturing technology, today announced the delivery of quad-core silicon built around the ARM® Cortex®-A17 processor implemented using GLOBALFOUNDRIES' 28nm Super Low Power (28nm-SLP) process with High-k Metal Gate (HKMG) technology. GLOBALFOUNDRIES utilized Cadence® tools exclusively to achieve 2.0GHz processor performance at typical operating conditions, which matched pre-silicon design performance predicted by Cadence Tempus Timing Signoff Solution analysis.

Cadence Logo.

The Cadence tools used in this successful design include Encounter® Digital Implementation System, Encounter RTL Compiler, Quantus QRC Extraction Solution, Tempus Timing Signoff Solution, Encounter Conformal® Equivalence Checker, Physical Verification System and Litho Physical Analyzer. The flow incorporated physical IP technology from the ARM POP™ IP suite to leverage the full performance range of the 28nm-SLP process.

Based on the success of this design, Cadence and GLOBALFOUNDRIES have also completed the tapeout of a second chip using the latest ARM Cortex-A17 processor RTL, achieving a 23 percent single-core area reduction versus the previous tapeout, while meeting the 2.0GHz maximum frequency signoff target. The second tapeout included the full suite of ARM POP IP, including the optimized memory instances for Cortex-A17. In addition, the Cadence Voltus IC Power Integrity solution was used throughout the design of the next-generation quad-core tapeout to guide and validate the power grid and enable the implementation of advanced power shutoff technologies. Encounter Conformal Low Power was used to verify the power-intent specification for the design.

"Silicon to simulation correlation at 2.0GHz performance further validates the maturity of our 28nm-SLP process, which continues to deliver silicon-proven performance and power targets our high-volume mid-range mobile customers demand," said Gregg Bartlett, senior vice president, Product Management Group at GLOBALFOUNDRIES. "We collaborated closely with Cadence and ARM to deliver these designs using our 28nm-SLP process, and our customers can reap the benefits when using the ARM Cortex-A17 processor and the Cadence design flow."

"SoCs based on the ARM Cortex-A17 processor deliver premium cost-optimized performance for multiple devices including mainstream mobile and other consumer products that take advantage of the millions of software applications designed for 32-bit ARM-based cores," said Dipesh Patel, executive vice president and general manager, physical design group, ARM. "The Cortex-A17 core is purpose-built for high performance within thermally restricted devices, and the partnership between ARM, Cadence and GLOBALFOUNDRIES enables designers to use it to meet an array of complex requirements. We also expect it to drive innovation in new applications such as high-end wearables."

"The full Cadence suite with integrated signoff enabled GLOBALFOUNDRIES to deliver working silicon with high accuracy," said Anirudh Devgan, senior vice president, Digital and Signoff Group, Cadence. "GLOBALFOUNDRIES can now offer an efficient process with an integrated Cadence flow that can allow designers to bring low-power, high-performance designs to the market within tight windows."

GLOBALFOUNDRIES' 28nm-SLP technology is ideally suited for the next generation of mobile devices and low power Internet of Things (IoT) solutions, enabling designs with faster processing speeds, smaller feature sizes, lower standby power and longer battery life. The technology is based on GLOBALFOUNDRIES' "Gate First" approach to HKMG, which has been in volume production for nearly four years. The technology offers a combination of performance, power efficiency and cost that is ideally suited for the mobile and IoT market.

About Cadence
Cadence enables global electronic design innovation and plays an essential role in the creation of today's integrated circuits and electronics. Customers use Cadence software, hardware, IP, and services to design and verify advanced semiconductors, consumer electronics, networking and telecommunications equipment, and computer systems. The company is headquartered in San Jose, Calif., with sales offices, design centers, and research facilities around the world to serve the global electronics industry. More information about the company, its products, and services is available at www.cadence.com.

About GLOBALFOUNDRIES 
GLOBALFOUNDRIES is the world's first full-service semiconductor foundry with a truly global footprint. Launched in March 2009, the company has quickly achieved scale as the second largest foundry in the world, providing a unique combination of advanced technology and manufacturing to more than 160 customers. With operations in Singapore, Germany and the United States, GLOBALFOUNDRIES is the only foundry that offers the flexibility and security of manufacturing centers spanning three continents. The company's three 300mm fabs and five 200mm fabs provide the full range of process technologies from mainstream to the leading edge. This global manufacturing footprint is supported by major facilities for research, development and design enablement located near hubs of semiconductor activity in the United States, Europe and Asia. GLOBALFOUNDRIES is owned by Mubadala Development Company. For more information, visit http://www.globalfoundries.com.

©2014 Cadence Design Systems, Inc. All rights reserved worldwide. Cadence, the Cadence logo, Conformal, and Encounter are registered trademarks and Quantus, Tempus, and Voltus are trademarks of Cadence Design Systems, Inc. in the United States and other countries. ARM and Cortex are registered trademarks of ARM Limited (or its subsidiaries) in the EU and/or elsewhere. POP is a trademark of ARM Limited (or its subsidiaries) in the EU and/or elsewhere. All rights reserved. All other trademarks are the property of their respective owners.

For more information, please contact:
Cadence Newsroom
408-944-7039
Email Contact

Logo - http://photos.prnewswire.com/prnh/20140102/SF39436LOGO

 

To view the original version on PR Newswire, visit: http://www.prnewswire.com/news-releases/globalfoundries-and-cadence-deliver-first-soc-enablement-solution-featuring-arm-cortex-a17-processor-in-28nm-slp-process-300011032.html

SOURCE Cadence Design Systems, Inc.

Contact:
Cadence Design Systems, Inc.
GLOBALFOUNDRIES
Web: http://www.cadence.com




Review Article Be the first to review this article

Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Siemens Goes ECAD With Mentor Graphics Acquisition
Jobs
Mechanical Engineer for IDEX Corporation at West Jordan,, UT
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
GIS Analyst II for Air Worldwide at Boston, MA
Senior Structural Engineer for Design Everest at San Francisco, CA
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017
SolidCAM: Program your CNCs directly inside your existing CAD system.



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise