MagnaChip Announces New 0.18um Low Power Manufacturing Process Targeting Internet of Things

SEOUL, South Korea and CUPERTINO, Calif., Nov. 6, 2014 — (PRNewswire) —  MagnaChip Semiconductor Corporation ("MagnaChip Semiconductor") (NYSE: MX), a Korea-based designer and manufacturer of analog and mixed-signal semiconductor products, today announced that it now offers a new 0.18 micron premium mixed signal, low power manufacturing process technology suited for applications such as mobile, wearables, wireless sensors and energy harvesting. These are key applications critical for the growth of IoT (Internet of Things). Gartner estimates that the IoT market for processing, communications and sensing will have a compound annual growth rate of approximately 29.2% from 2013 to 2020. This new premium 0.18um low power process features transistors fully optimized for IoT applications.

This new mixed signal process incorporates advantages such as 1.8V n and p-channel MOSFETs with low leakage current (~10 pA per micron of width) and low threshold voltage (Vth of only ~|0.3V|), which enable system on a chip designs to perform with very low active and low stand-by power consumption. MagnaChip's 0.18 micron low power process also enables DC-DC boost converters to be optimized for IoT applications, with very low start-up voltage.

This new process will also enable efficient operation of IoT devices from power sources such as solar cells, thermoelectric generators, vibration energy harvesters and electromagnetic harvesters. Another unique advantage of this process is the excellent device isolation and low current gain of parasitic bipolar transistors (less than 0.01), giving it better latch-up immunity and less leakage current over temperature and voltage. This is achieved through the use of conventional, lower cost silicon wafers instead of the more expensive silicon on insulator wafers.

The new 0.18 micron low power process will also support premium features available on MagnaChip's standard logic processes including low noise transistors for analog blocks, high k metal-insulator-metal capacitor, copper wire bonding compatibility, low cost aluminum top metallization as well as redistribution layer (RDL) process options.

"We are very pleased to offer our new 0.18 micron mixed-signal process solution incorporating features that support low power IoT applications while also minimizing customer costs," said Namkyu Park, Executive Vice President of MagnaChip's Semiconductor Manufacturing Services Division. "We are constantly working on leading-edge solutions to meet the ever increasing technology requirements of our customers and plan to continue to enable our partners with more options to cover their specific needs."

About MagnaChip Semiconductor 
Headquartered in South Korea, MagnaChip Semiconductor is a Korea-based designer and manufacturer of analog and mixed-signal semiconductor products for high volume consumer applications. MagnaChip Semiconductor believes it has one of the broadest and deepest ranges of analog and mixed-signal semiconductor platforms in the industry, supported by its 30-year operating history, a large portfolio of registered and pending patents, and extensive engineering and manufacturing process expertise. For more information, please visit www.magnachip.com.

CONTACTS:


In the United States:

Robert Pursel

Director of Investor Relations

Tel. +1-408-625-1262

robert.pursel@magnachip.com

In Korea:

Chankeun Park

Senior Manager, Public Relations

Tel. +82-2-6903-3195

chankeun.park@magnachip.com

 

SOURCE MagnaChip Semiconductor Corporation

Contact:
MagnaChip Semiconductor Corporation
Web: http://www.magnachip.com




Review Article Be the first to review this article

Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Siemens Goes ECAD With Mentor Graphics Acquisition
Jobs
Mechanical Engineer for IDEX Corporation at West Jordan,, UT
GIS Analyst II for Air Worldwide at Boston, MA
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
Senior Structural Engineer for Design Everest at San Francisco, CA
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017
SolidCAM: Program your CNCs directly inside your existing CAD system.



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise