PRO DESIGN Releases Embedded Processing Platform for FPGA based SoC and IP Prototyping

MUNICH — (BUSINESS WIRE) — October 20, 2014 — PRO DESIGN today announced the launch of its new proFPGA ZynqTM 7000 FPGA Module, a complete embedded processing platform for the development and verification of SoC and IP design.

PRO DESIGN Releases Embedded Processing Platform for FPGA based SoC and IP Prototyping (Photo: Busin ...

PRO DESIGN Releases Embedded Processing Platform for FPGA based SoC and IP Prototyping (Photo: Business Wire)

The proFPGA product family is a complete, scalable, and modular multi FPGA Prototyping solution, which fulfills highest needs in the area of FPGA based ASIC Prototyping. A new member of this modular and flexible system concept is the proFPGA ZynqTM 7000 FPGA module, which can be easily mounted on the proFPGA uno, duo or quad motherboard and mixed together with various other proFPGA modules like the proFPGA Virtex 7 2000T FPGA module. The proFPGA ZynqTM 7000 FPGA module addresses customers who require a complete embedded processing platform for high performance SoC Prototyping solution, IP verification and early software development. The innovative system concept and technologies offer highest flexibility and reuseability for several projects, which guarantees the best return on invest.

Equipped with a Xilinx ZynqTM XC7Z045 or XC7Z100 FPGA which combines a user FPGA with an ARM Core Processor (Dual ARM® Cortex™-A9 MPCore™ with CoreSight™) and several on board interfaces like USB 2.0 OTG, Gigabit Ethernet or ARM JTAG debug interface the Board offers a complete embedded processing platform. The board includes already 1 GB on board DDR3 and dual quad SPI flash memory.

Most of todays SoC designs contain an ARM processor. Instead of implementing the ARM core into a FPGA and occupying important FPGA resources the user can take the proFPGA ZynqTM module which has already an embedded ARM processor with verified interfaces like USB 2.0, OTG or Gigabit Ethernet and memories. Further the FPGA module offers a direct ARM debug interface that you user can benefit and use the proven ARM debug environment in combination with the proFPGA prototyping system and can focus on the verification of his design.

The new proFPGA ZynqTM module offers a total of 2 extension sites on the top with 260 standard I/Os and 16 high speed serial transceivers for extending the board with standard proFPGA or user specific extension boards or to easily interconnect it to further proFPGA FPGA modules to extend the capacity. The well designed board is optimized and trimmed to guarantee best signal integrity to achieve highest performance and allow a maximum point to point speed of up to 1.2 Gbps over the standard FPGA I/O and up to 12.5 Gbps over the high speed serial transceivers.

The proFPGA-System comes with the proFPGA Builder software, which provides an extensive set of features, like an advanced clock management, integrated self- and performance test, automatic board detection, I/O voltage programming, system scan- and safety mechanism and remote system configuration in seconds via USB, or Ethernet which extraordinarily simplifies the usage of the proFPGA system.

“We are proud of the success we have achieved with our proFPGA product line so far. We released the product just the end of 2012 and were able to win already over 30 semiconductor vendor in 10 different countries. This confirms that the customers accept and like our modular system concept, which offers a great degree of flexibility while still providing the high system performance. The new proFPGA ZynqTM 7000 FPGA module extends our product portfolio and now even more users can benefit from our proFPGA solution for further applications”, said Gunnar Scholl, CEO of PRO DESIGN.

Availability and Price

The proFPGA ZynqTM 7000 FPGA Module is available since October and price starts at US$ 8.600,-

More information: www.proFPGA.com



Contact:

PRO DESIGN Electronic GmbH
Gunnar Scholl
Tel: +4980628080
Email Contact




Review Article Be the first to review this article
SolidCAM: Cutting Webinar

Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
GE Additive’s Big Plans For Metal AM
Jobs
Mechanical Engineer II - Requisition ID 090445 for L3 Technologies at New York, NY
ECAD Designer - Data Connectivity for Delphi at Auburn Hills, MI
Estimator / Bidder for Rulon International at Saint Augustine, FL
Upcoming Events
33rd Annual Coordinate Metrology Society Conference at Snowbird UT - Jul 17 - 21, 2017
EMO Hannover 2017 at Hannover Germany - Sep 18 - 23, 2017
The 30th Annual Integrated Process Excellence Symposium & Training at Wyndham Grand Bonnet Creek Resort Orlando FL - Sep 18 - 20, 2017
Additive Manufacturing Conference 2017 at Knoxville Convention Center 701 Henley Street Knoxville TN - Oct 10 - 12, 2017



Internet Business Systems © 2017 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise