The Software That’s Helping Take the Weight off NASA’s Orion Crew Vehicle: Collier Research to present details of HyperSizer’s analysis and optimization project for space agency at CAMX

HAMPTON, Va., October 2, 2014— At the 2014 Composites and Advanced Materials Expo (CAMX) (previously SAMPE), October 13-16 at the Orange County Convention Center in Orlando, Fla., Collier Research Corporation will demonstrate a key software program used to lightweight the heat shield of NASA’s Orion Multi-purpose Crew Vehicle— HyperSizer®.

NASA’s Orion team utilized information gathered from HyperSizer analyses to inform discussions that led to a 23 percent reduction of the final weight of the baseline design, which means hundreds of pounds of unnecessary weight were eliminated. The un-crewed test flight of the vehicle, Exploration Flight Test-1, is currently slated for December 2014. The final HyperSizer-designed heat shield will be used on later, manned flights.

For those interested in learning more about this project at CAMX, James Ainsworth, aerospace stress engineer at Collier Research, will present a paper during the Thursday morning session that will give an in-depth look at the design and analysis process, as well as the analytical methods used to perform trade studies of the Orion heat shield carrier structure.

HyperSizer, the first-ever software commercialized out of NASA, provides stress analysis and sizing optimization for reducing the weight of aircraft, wind turbine blades and other structures in addition to space vehicles—whether designed with composite or metallic materials. A typical HyperSizer analysis produces weight savings of between 25 and 40 percent.

“We’ve developed a software program for flight certification in the zero-tolerance environment of NASA,” says Craig Collier, president and founder of Collier Research Corporation. “We’ve continued to increase HyperSizer’s speed and robustness, while reducing necessary user input and creating a more flexible and open platform. This makes it ideal for small teams of engineers that need to guarantee the repeatability of results before production, and ensures they can do so in a short amount of time.”

Collier Research has added a U.S. distributor to their multinational network—Jim Jeans, president of Structural Design & Analysis, Inc. In addition to Collier technical experts, Jeans will be available at Collier Research’s HyperSizer booth (Booth 3072) to answer questions and provide information. 

To book a private demonstration of HyperSizer software at CAMX, contact Jennifer Hause at Collier Research: Email Contact.

About Collier Research Corporation

20% lighter structures in 20% of the time

What began at NASA 20 years ago has continuously developed into today’s HyperSizer suite of structural software solutions. As Collier Research Corporation’s flagship product, HyperSizer performs design, stress analysis, and detail sizing optimization for aircraft and space launch vehicles fabricated with composite or traditional metallic materials. On average, the software reduces the weight of structures by 20-40%, an exceptional achievement for aerostructures. HyperSizer replaces the need for spreadsheets and “hand calculations” with automatically generated stress reports for FAA certification. HyperSizer customers are able to produce results faster and more accurately, giving them an edge over competitors.

Collier Research Corporation provides software solutions, methods research, and consulting services for the aerospace, wind energy, high speed rail, automotive, and shipbuilding industries with its broad range of structural capabilities. For more information, visit www.HyperSizer.com

Contacts:                                                                                            

Collier Research Corporation                     

Ivonne Collier

(757) 825-0000

Email Contact

 

Parker Group

Christina Casinelli

(401) 272-1510

Email Contact

 

 

 




Review Article Be the first to review this article

Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Siemens Goes ECAD With Mentor Graphics Acquisition
Jobs
Mechanical Engineer for IDEX Corporation at West Jordan,, UT
Senior Structural Engineer for Design Everest at San Francisco, CA
GIS Analyst II for Air Worldwide at Boston, MA
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise