MEDIA ALERT: OneSpin Solutions to Demonstrate Formal Verification Solutions at Design Solution Forum in Japan

SANTA CLARA, CA -- (Marketwired) -- Sep 30, 2014 -- OneSpin Solutions

WHO: OneSpin® Solutions, provider of innovative formal verification and formal equivalence checking solutions

WHAT: Will attend the Design Solution Forum to demonstrate new, formal-based verification techniques and showcase how its formal verification software is being used to solve the toughest verification problems.

OneSpin Solutions will offer product demonstrations of:

  • OneSpin 360 DV Inspect™ for fully automated formal design analysis with assertion synthesis, and advanced pre-packaged solutions
  • OneSpin 360 EC™ (equivalence checking) product family for FPGA and ASIC synthesis verification leveraging sequential optimizations
  • OneSpin 360™ DV Verify™ (design verification) family, including precise Quantify observation coverage-driven property checking
  • System on chip (SoC) and intellectual property (IP) integration verification solutions

WHEN: Friday, October 3, from 10 a.m. until 6 p.m.

WHERE: Shin Yokohama Kokusai Hotel, South Building, Yokohama, Japan

About OneSpin Solutions

Electronic design automation (EDA) supplier OneSpin Solutions was founded in 2005 as a spin-off from Infineon Technologies AG. Its award-winning formal verification software is based on more than 300 engineering years of development and application service experience. OneSpin's comprehensive product line enables design teams to avoid costly design respins, while dramatically cutting their verification effort and engineering schedules. Leading telecommunications, automotive, consumer electronics and embedded systems companies rely on OneSpin to achieve the highest possible verification quality while reducing their time-to-market pressures. Its United States headquarters is located in Santa Clara, Calif. Corporate headquarters is in Munich, Germany. Email: info@onespin-solutions.com. Website: www.onespin-solutions.com.

OneSpin, OneSpin Solutions, OneSpin 360, the OneSpin logo and Quantify are trademarks of OneSpin Solutions GmbH. All other trademarks are the property of their respective owners.

For more information, contact:
Nanette Collins
Public Relations for OneSpin Solutions
(617) 437-1822

Email Contact 





Review Article Be the first to review this article
HP

SolidCAM: Program your CNCs directly inside your existing CAD system.

Featured Video
Jobs
Senior Mechanical Engineer for Verb Surgical at Mountain View, CA
CAD Systems Administrator for KLA-Tencor at Milpitas, CA
Principal Research Mechatronics Engineer for Verb Surgical at Mountain View, CA
Industrial Designer Intern – Spring 2017 for Nvidia at Santa Clara, CA
Lead Geospatial Analyst for Alion at McLean, VA
Upcoming Events
PI APPAREL Hong Kong 2017 at SHANGRI-LA KOWLOON 64 Mody Road Tsim Sha Tsui East Kowloon Hong Kong - Apr 5 - 6, 2017
SOLIDWORKS intro and hands on session – Slough at Baylis House, Slough, Berkshire, SL1 3PB Slough United Kingdom - Apr 7, 2017
PMTS 2017 at Greater Columbus Convention Center Exhibit Halls E, F, & D 400 North High St. Columbus OH - Apr 25 - 27, 2017
Engineer 3D! Training + Technology Conference at Hyatt Regency Milwaukee 333 West Kilbourn Avenue Milwaukee WI - Apr 25 - 26, 2017
MasterCAM



Internet Business Systems © 2017 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise