Altera FPGAs Enable Dolby Vision for Ultra-HD TVs

Altera Programmable Logic Drives Performance and Image Processing for Enhanced Viewing Experiences on Ultra-High Definition (UHD) Displays

SAN JOSE, Calif., Sept. 15, 2014 — (PRNewswire) —  Altera Corporation (NASDAQ: ALTR) today announced its Arria® V FPGAs are delivering the high performance needed for Dolby Laboratories' innovative Dolby® Vision™ imaging technology for ultra-high definition (UHD) displays. The Dolby Vision value proposition is to deliver a dramatically different visual experience to TV displays, enabling content creators and television manufacturers to deliver greater brightness while also providing much deeper, more nuanced darks, and a fuller palette of colors. Dolby Laboratories reports that Dolby Vision can deliver signals that offer 40 times brighter highlights than today's TVs, along with up to 1,000 times greater contrast.

Altera programmable logic drives performance and image processing for enhanced viewing experiences on ultra-high definition (UHD) displays.

According to Roland Vlaicu, vice president for Consumer Imaging at Dolby Laboratories, "Altera FPGAs provide the processing and compression capabilities that enable Dolby Vision to override previous technology limitations that required video content to be altered before being reproduced for transmission. With Dolby Vision, producers and creative teams have the freedom to use a fuller gamut of colors, as well as peak brightness and deep contrasts for better viewing experiences."

David Gamba, senior director of the Consumer Business Unit at Altera, remarked, "Equipment manufacturers must address new, complex 4K, 8K, H.265/HEVC and connectivity standards, and FPGA programmability allows them to complete design cycles faster and deliver products to market. The work with Dolby, an innovative technology leader, shows the value of rapid algorithm processing enabled by Altera FPGAs and SoCs and software IP to bring groundbreaking, innovative designs to market."

Several television manufacturers have already engaged with Dolby and Altera for the solution.

To learn more about Altera broadcast solutions visit http://www.altera.com/broadcast.

About Altera

Altera programmable solutions enable designers of electronic systems to rapidly and cost effectively innovate, differentiate and win in their markets. Altera offers FPGAs, SoCs, CPLDs, ASICs and complementary technologies, such as power management, to provide high-value solutions to customers worldwide. Visit www.altera.com

ALTERA, ARRIA, CYCLONE, ENPIRION, MAX, MEGACORE, NIOS, QUARTUS and STRATIX words and logos are trademarks of Altera Corporation and registered in the U.S. Patent and Trademark Office and in other countries. All other words and logos identified as trademarks or service marks are the property of their respective holders as described at  www.altera.com/legal

Editor Contact:
Karin Taylor
Altera Corporation
(408) 544-8207
Email Contact

Altera(R) programmable solutions enable designers of electronic systems to rapidly and cost effectively innovate, differentiate and win in their markets. Altera offers FPGAs, SoCs, CPLDs, ASICs and complementary technologies, such as power management, to provide high-value solutions to customers worldwide.

Photo - http://photos.prnewswire.com/prnh/20140912/145875

Logo - http://photos.prnewswire.com/prnh/20101012/SF78952LOGO

 

SOURCE Altera Corporation

Contact:
Altera Corporation
Web: http://www.altera.com




Review Article Be the first to review this article

Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Re-Use Your CAD: The ModelCHECK Handbook
Jobs
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
Senior Structural Engineer for Design Everest at San Francisco, CA
GIS Analyst II for Air Worldwide at Boston, MA
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017
SolidCAM: Program your CNCs directly inside your existing CAD system.



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise