eSOL’s eT-Kernel Real-Time Operating System Evaluation Kit Now Available for Altera SoC

Permits Developers a Free 30-day Evaluation of the Cyclone V SoC Device with the integrated ARM Cortex-A9 MPCore Processor and eT-Kernel RTOS

Tokyo, Japan. July 28, 2014 -–
eSOL, a leading developer of real-time embedded software solutions, announced that the eT-Kernel Evaluation Kit is now available for Cyclone® V SoC, which integrates the dual-core ARM Cortex-A9 MPCore processor with the FPGA fabric systems. The Evaluation Kit features all the required base software for application development, including eSOL's  eT-Kernel Multi-Core Edition real-time operating system (RTOS), tightly integrated with the  eBinder Integrated Development Environment (IDE), middleware components, and device drivers. With the free 30-day evaluation license, developers can easily and quickly evaluate the performance and quality of Cyclone V SoC and eT-Kernel. eT-Kernel facilitates the reuse of the software assets developed for uITRON, the most popular RTOS in Japan and Asian countries, because of its inheritance functions and architecture.

Runtime software in the eT-Kernel/Cyclone V SoC Evaluation Kit includes dedicated device drivers for on-chip controllers on the Cyclone V SoC Development Board (*) including the SD Memory Card, USB host, and Ethernet controllers, plus middleware components including file systems, network protocol stacks, and a USB host stack. 

The eBinder IDE offers a wide variety of development tools, including ARM's genuine compiler. These tools enable developers to quickly verify the behavior and performance of a target sample application running on Cyclone V SoC. eBinder assists in efficient application development in less time at lower cost for Cyclone V SoC through its multi-programming tools, which are important in developing software on multi-core processors. It also has useful functions for debug and analysis of complex multi-core systems. 

Altera SoCs integrate a dual-core ARM Cortex-A9 processor and FPGA to achieve both good performance and flexibility of programmable logic, while pursuing lower power consumption, less cost, and smaller board size. Developers can continue to use the eT-Kernel RTOS-based software platform for commercial projects, to efficiently develop software reusing ITRON software assets, and to secure high real-time capability and reliability while making full use of the features of Altera SoCs. Altera SoCs are ideal for a wide variety of devices such as FA and industrial equipment (industrial networking and motor control), in-vehicle and broadcast equipment (capture card and video conversion), and consumer electronics (display).

eSOL has been working closely with Altera through technical liaisons and exchanging information on the product roadmap. eSOL is committed to strongly support Altera SoC-based software developers by utilizing their expertise in real-time operating systems, and their technical know-how based on extensive experience and deep knowledge of ARM processors.

"We are pleased that eSOL, a leading developer of the TRON OS, which is the most common real-time operating system in Japan, now offers a 30-day trial version of the easy-to-use eT-Kernel Platform for Cyclone V SoC," said Takayuki Oyama, Product Marketing Manager of Altera Japan. "The Evaluation Kit supports both Altera's full-featured Cyclone V SoC Development Kit and low-cost Helio Board provided by our distributor Altima Corporation. Software developers can choose either Altera’s Cyclone V SoC Development Kit for advanced systems which require the highest processor performance or Altima's Helio Board for evaluation of Altera SoC at low cost. We expect that Altera SoC will be adopted more broadly since the eT-Kernel Platform is available, which consists of the multi-core RTOS, eBinder IDE, middleware components, and device drivers, for different target boards to meet various needs for cost and performance."

"The eT-Kernel/Cyclone V SoC Evaluation Kit with a 30-day free trial period enables easy evaluation of eT-Kernel for multi-core processors, which get better performance out of Altera's Cyclone V SoC,” said Hiroaki Kamikura, General Manager of the Embedded Products Division, eSOL. "eSOL has many years of experience in supporting ARM processors from entry-level to high-end, and in providing professional services including technical support. We will provide strong support for those who continue to use Altera SoC and eT-Kernel after the trial period of 30 days, so that they can actually conduct commercial development without any stress."

About eSOL Co., Ltd.

eSOL is a leading embedded software developer that enables customers to accelerate development of applications based on high-end embedded processors including multi-core. Our advanced, scalable, multi-profiled real-time operating systems are tightly integrated with development tools and middleware components to create flexible development platforms used by OEMs and ODMs worldwide in competitive vertical markets such as automotive, consumer electronics, industrial and medical equipment and aerospace. Founded in 1975, eSOL is based in Tokyo, Japan. 
For more information, please visit  www.esol.com




Review Article Be the first to review this article
HP

Autodesk - DelCAM

Featured Video
Jobs
CAD Systems Administrator for KLA-Tencor at Milpitas, CA
Senior Mechanical Engineer for Verb Surgical at Mountain View, CA
Principal Research Mechatronics Engineer for Verb Surgical at Mountain View, CA
Lead Geospatial Analyst for Alion at McLean, VA
Industrial Designer Intern – Spring 2017 for Nvidia at Santa Clara, CA
Upcoming Events
SOLIDWORKS 2017 Launch Event – Walsall at Village Hotel Club, Walsall, WS2 8TJ Walsall United Kingdom - Mar 30, 2017
PI APPAREL Hong Kong 2017 at SHANGRI-LA KOWLOON 64 Mody Road Tsim Sha Tsui East Kowloon Hong Kong - Apr 5 - 6, 2017
SOLIDWORKS intro and hands on session – Slough at Baylis House, Slough, Berkshire, SL1 3PB Slough United Kingdom - Apr 7, 2017
Engineer 3D! Training + Technology Conference at Hyatt Regency Milwaukee 333 West Kilbourn Avenue Milwaukee WI - Apr 25 - 26, 2017
SolidCAM: Patented Wizard to optimal feeds & speeds
MasterCAM



Internet Business Systems © 2017 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise