Semtech Announces Hybrid Memory Cube Compliant PHY IP

Semtech concludes electrical compliance testing of the Snowbush® family of 28nm Platform Physical Layer IP - confirming support for Hybrid Memory Cube

CAMARILLO, Calif. — (BUSINESS WIRE) — June 10, 2014 — Semtech Corporation (NASDAQ: SMTC) today announced the company has successfully completed electrical compliance testing of its Snowbush® 28nm Platform Physical Layer IP, in support of the Hybrid Memory Cube (HMC) specification for ultra fast, next-generation memory.

The Snowbush Platform IP has met the interoperability requirements of the HMC standard with significant margin and passed the rigorous testing required by Micron, a founding developer of the Hybrid Memory Cube Consortium. This ensures compliance and enables system designers to deploy I/O designs that support the HMC standard on their ASICs and SOCs.

Semtech worked closely with Micron to perform silicon measurements on actual hardware to ensure that all the critical elements of this high-speed memory interface meet the requirements of the HMC specification. Such testing relieves ASIC or SOC developers from conducting their own pre-silicon validation and encourages the early use of the interface on systems-level chips.

“Semtech’s comprehensive testing provides our mutual customers with the assurance that the Snowbush® PHY will provide the support needed for deploying systems based on HMC technology,” said Robert Feurle, Vice President of Marketing for Compute and Networking at Micron. “Our work with Semtech is an important step in delivering the performance and power efficiency required by a wide range of next-generation applications.”

Micron supplies the HMC memory chips and Semtech will provide the Snowbush Platform IP to companies that will integrate it into their system-level chips to implement the high-speed link to the memory chip.

HMC has been recognized by the industry as the long-awaited answer to addressing the limitations of efficiency and power consumption imposed by conventional memory technology. With the ability to deliver up to 15 times the bandwidth of a DDR3 module, with 70 percent less energy and 90 percent less space than existing technologies, HMC’s abstracted memory enables designers to devote more time to HMC’s groundbreaking features and performance and spend less time navigating the multitude of memory parameters required to implement basic functions. In addition, HMC manages error correction, resiliency, refresh and other parameters exacerbated by memory process variation.

“By supporting a new emerging standard like HMC, with our silicon-proven 28nm IP platform, we continue to leverage and extend our programmable SerDes solution, which we pioneered over 10 years ago,” said Kevin Walsh, Director of Worldwide Marketing for Semtech. “The users of the HMC memory interface will benefit from our low power, low latency architecture, as this new form of serial memory emerges to deliver high data density per pin at very low power.”

Pricing and Availability

The Snowbush IP supporting HMC in 28nm is available now. Pricing depends on configuration and the number of instantiations in a design. Contact sales@snowbush.com for additional details. Semtech offers comprehensive integration assistance, including field- and factory-based support. Information about the HMC IP and other silicon IP products is available at www.semtech.com/snowbush.

As a driving force in the HMCC, Micron has worked closely with lead networking and computing customers and enablers, like Semtech, and has successfully supplied HMC engineering samples for developing next-generation systems. Micron will begin ramping volume production later in 2014. For more information visit  http://www.micron.com/products/hybrid-memory-cube or http://www.hybridmemorycube.org.

About Semtech

Semtech Corporation is a leading supplier of analog and mixed-signal semiconductors for high-end consumer, computing, communications and industrial equipment. Products are designed to benefit the engineering community as well as the global community. The company is dedicated to reducing the impact it, and its products, have on the environment. Internal green programs seek to reduce waste through material and manufacturing control, use of green technology and designing for resource reduction. Publicly traded since 1967, Semtech is listed on the NASDAQ Global Select Market under the symbol SMTC. For more information, visit http://www.semtech.com.

Semtech, the Semtech logo, and Snowbush are registered marks of Semtech Corporation. All other marks are the property of their respective owners.



Contact:

Semtech Corporation
Pauline Cadena, 805-389-2755
Email Contact




Review Article Be the first to review this article
SolidCAM: Program your CNCs directly inside your existing CAD system.


Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Siemens Goes ECAD With Mentor Graphics Acquisition
Jobs
Mechanical Engineer for IDEX Corporation at West Jordan,, UT
GIS Analyst II for Air Worldwide at Boston, MA
Senior Structural Engineer for Design Everest at San Francisco, CA
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise