Avery Design Systems Targets Low Power Retention Register Synthesis

ANDOVER, Mass. — (BUSINESS WIRE) — May 28, 2014 — Avery Design Systems Inc., an innovator in functional verification productivity solutions, today introduced a new low power design optimization solution, RetentSYN, targeting area and leakage power reduction in low power designs. RetentSYN’s patent pending solution automatically identifies registers that do not require retention during power-down cycles and generates optimized UPF.

RetentSYN utilizes formal analysis of a design’s various power state transition sequences and function test sequences to determine which registers need retention and which do not. “Using retention registers can be very costly to designs. Providing an automated tool for retention register selection enables greater area and leakage power reduction compared to results from manually selecting registers,” said Chris Browy, VP sales and marketing of Avery Design.

RetentSYN performs power-aware symbolic simulation of RTL or netlists based on analyzing the design’s initial UPF and provided power state transition sequences and function test sequences captured by one or more regular RTL or gate-level logic simulation waveforms. To determine which registers in any one of the powered-down blocks require retention, RetentSYN constructs a proof that indicates if a non-retained register corrupted to “X” during power-down will propagate to outputs or other state registers thus altering the design state compared to fully retained designs. An optimized UPF is generated. Users can also perform what if analysis to verify their manual retention selections are valid. RetentSYN supports chip-level analysis involving long power sequences using automated design and temporal partitioning methods.

Partial retention designs cut area and leakage power considerably compared to full retention designs. Retention register-based designs also provide for the fastest power-up times compared to other alternatives such as scan-based retention approaches.

Visit us at the Design Automation Conference (DAC) June 2-4 in booth #1225.

About Avery Design Systems

Founded in 1999, Avery Design Systems, Inc. enables system and SOC design teams to achieve dramatic functional verification productivity improvements through the use of formal analysis applications for automatic property and coverage generation, low power retention register synthesis, and RT-level and gate-level X verification; robust core-through-chip-level Verification IP for PCI Express, USB, AMBA, UFS, MIPI, DDR/LPDDR, HMC, ONFI/Toggle, NVM Express, SCSI Express, SATA Express, eMMC, SD/SDIO, and CAN FD standards. The company is a member of the Mentor Graphics Value Added Partnership (VAP) program and has established numerous Avery Design VIP partner program affiliations with leading IP suppliers. More information about the company may be found at www.avery-design.com.



Contact:

Avery Design Systems
Chris Browy, 978-689-7286
Email Contact




Review Article Be the first to review this article
Rand3D

Autodesk University 2017

Featured Video
MCAD Corporate Newsletter
rss feed
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
NVIDIA’s AI Computer Drives AVs
Jobs
Mechanical Engineer for The Planate Management Group LLC at Perry Point, MD
Senior Mechanical Engineer for Albert Kahn and Associates at Detroit, MI
GIS Software Developer for UDC at Englewood, CO
ENVIRONMENTAL GRAPHIC DESIGNER for Blitz at San Francisco, CA
Vice President, Transportation Services for Associated General Contractors of New York State at Albany, NY
Structural Engineer for The Planate Management Group LLC at Perry Point, MD
Upcoming Events
ASSESS 2017 CONGRESS at Bolger Center Potomac MD - Nov 1 - 3, 2017
FABTECH 2017 at McCormick Place Chicago IL - Nov 6 - 9, 2017
ATX MINNEAPOLIS 2017 at Minneapolis MN - Nov 8 - 9, 2017
2017 China Chongqing International Machine Tool Show (CCIMT) at Chongqing International Expo Center, Yubei Chongqing China - Nov 13 - 16, 2017
SolidCAM: SolidCARE



Internet Business Systems © 2017 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise