Thursday is Training Day at the 51st Design Automation Conference

Latest Design Techniques taught in four tracks on SystemVerilog,
ESL & SystemC, Tcl and the ARM
® Cortex® Family of Processors

LOUISVILLE, Colo. — (BUSINESS WIRE) — May 14, 2014 — The Design Automation Conference ( DAC), the premier conference devoted to the design and automation of electronic systems, will feature a day of training providing engineers with the latest techniques required for today’s designs. Four tracks of training will be held on Thursday, June 5th, 2014. DAC 2014 will be held at Moscone Center in San Francisco, Calif. from June 1-5, 2014. Conference registration is now open.

Each track of training comprises two separate half day sessions, in the morning from 9:00am to 12:30pm, and in the afternoon from 2:00pm to 5:30pm. All tracks are taught by professional training instructors from Doulos, the global leader in the development and delivery of training solutions for electronic design.

“On the back of last year’s success at the 50th DAC with the inaugural Thursday is Training Day, we are delighted to be partnering with DAC again in San Francisco to deliver a full day of intensive skills-based training in vital project-related subjects for the engineering community,” said Rob Hurley, Doulos CEO. “This is a great opportunity not to be missed by any DAC attendee.”

The four training tracks are:

  • Track 1: SystemVerilog Verification
    • Part 1: Hardcore SystemVerilog for Class-Based Verification
    • Part 2: Easier UVM
  • Track 2: ESL and SystemC
    • Part 1: The SystemC Language
    • Part 2: TLM-2.0 and the IEEE 1666-2011 Standard
  • Track 3: ARM Accredited Engineer Program
    • Part 1: Kick Start to the ARM® Cortex® Processor Family
    • Part 2: Software Development for the ARM Cortex Processor Family
  • Track 4:
    • Part 1: Beyond the GUI: Using Tcl to Enhance your EDA Experience
    • Part 2: Embedded Systems Energy Management: Squeezing the Most Out of Battery Life using ARM® Cortex®-M Series

Session details, including summaries, presenter information and room numbers, can be found at: https://dac.com/events/training. Reserve a seat when you register for DAC at www.dac.com.

About DAC

The Design Automation Conference (DAC) is recognized as the premier event for the design of electronic circuits and systems, and for electronic design automation (EDA) and silicon solutions. A diverse worldwide community representing more than 1,000 organizations attends each year, represented by system designers and architects, logic and circuit designers, validation engineers, CAD managers, senior managers and executives to researchers and academicians from leading universities. Close to 60 technical sessions selected by a committee of electronic design experts offer information on recent developments and trends, management practices and new products, methodologies and technologies. A highlight of DAC is its exhibition and suite area with approximately 200 of the leading and emerging EDA, silicon, intellectual property (IP) and design services providers. The conference is sponsored by the Association for Computing Machinery (ACM), the Electronic Design Automation Consortium (EDA Consortium), and the Institute of Electrical and Electronics Engineers (IEEE), and is supported by ACM's Special Interest Group on Design.

Design Automation Conference acknowledges trademarks or registered trademarks of other organizations for their respective products and services.



Contact:

Design Automation Conference
Michelle Clancy, 1-303-530-4334
Email Contact




Review Article Be the first to review this article
SolidCAM: Program your CNCs directly inside your existing CAD system.


Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Siemens Goes ECAD With Mentor Graphics Acquisition
Jobs
Mechanical Engineer for IDEX Corporation at West Jordan,, UT
Senior Structural Engineer for Design Everest at San Francisco, CA
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
GIS Analyst II for Air Worldwide at Boston, MA
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise