Integrated EDA Tool Suite from Tanner EDA, Incentia and Aldec Helps ASIC Design House Lower Cost and Increase Efficiency with No Compromise in Performance.

Tanner EDA is high performance, low cost, no compromise

MONROVIA, California – April 29, 2014 – In today’s ‘always on’, Internet of Things connected world, the demand for high-performance, mixed-signal ASICs continues to grow.  Many thousands of mixed-signal devices are produced on mainstream process nodes in foundries worldwide.  Designers working on these mainstream devices do not always need, nor can they afford, the EDA tools from the vendors focused on serving the most advanced process nodes.  Tanner EDA, through its partnerships with Incentia Design Systems, Inc. and Aldec, Inc., provides a fully-integrated, complete analog/mixed-signal tool suite to address the mainstream with no compromise in performance.

Dresden-based ASIC design services company, Productivity Engineering (PE) a Tanner EDA customer since 2006, has relied on the full Tanner EDA tool suite; including front end design, layout, and verification.  Stefan Schubert, PE’s Vice President of IC Design Services remains impressed with Tanner EDA tools finding them intuitive, easy to use, and fully capable of meeting their design needs. 

Early last year, PE adopted three new tools to its design flow, provided by Tanner EDA:

  1. Logic Synthesis by Incentia DesignCraft™
  2. Mixed –signal simulation by Aldec Riviera-PRO™ TE
  3. Physical Verification by Tanner EDA’s HiPer Verify™

PE found the DesignCraft tool to perform at least as well as more expensive equivalents, both in terms of speed and features.  “It is the first time we have had DFT support in a tool.  It is something we have always had to do separately before,” said Schubert.

Digital-heavy mixed-signal simulation was another task for which PE had been relying on older software.  Now PE has invested in the Riviera-PRO TE and the Tanner-supplied AMS simulation suite was considerably lower cost than offerings from the mainstream rivals. But lower cost does not necessarily mean less functionality or performance, Schubert emphasized. 

PE has also invested in Tanner EDA’s new HiPer Verify tool suite.  PE has adopted a hybrid tool solution for their verification; maintaining a mix of Calibre® and HiPer Verify software licenses.  “The critical factor with HiPer Verify is that it runs Calibre rules files,” Schubert confirmed.  He pointed out that HiPer Verify exploits hierarchical and repetitive features, with an error navigator to locate violations and a one-time correction facility, in order to improve productivity and ensure optimal performance. “The mixed tool portfolio has allowed us to better align tool capability with the requirements of the design while lowering our overall cost,” said Schubert.

Tanner EDA tools not only represent a lower initial outlay than many tools of comparable performance, but they cost considerably less to maintain. “This gives us a competitive advantage as a design services company,” Schubert commented, “And we make no sacrifices in terms of design performance.”

To learn more, read the entire Productivity Engineering case study from Tanner EDA.

Pricing and Availability

HiPer Silicon™ Design Suite v16.1 including partner product solutions; DesignCraft and Riviera-PRO TE, is available for the Windows® and Linux® operating systems directly from Tanner EDA. For additional information, visit the Tanner EDA website at, contact Tanner EDA Sales by phone (626-471-9701) or email Email Contact.

About Tanner EDA

Tanner EDA provides a complete line of EDA software solutions that drive innovation for the design, layout and verification of analog and mixed-signal (A/MS) integrated circuits (ICs) and MEMS. Customers are creating breakthrough applications in areas such as power management, displays and imaging, automotive, consumer electronics, life sciences, and RF devices. Founded in 1988, Tanner EDA solutions deliver just the right mixture of features, functionality and usability. The company has shipped over 33,000 licenses of its software to more than 5,000 customers in 67 countries.

HiPer Verify, HiPer Silicon, Tanner Tools, L-Edit, S-Edit and W-Edit are trademarks of Tanner Research, Inc. Any other trademarks or trade names mentioned are the property of their respective owners.

#          #          #

Media Contact :

Linda Marchant, Cayenne Communication LLC --
Email Contact

EDA is high performance, low cost, no compromise

Review Article Be the first to review this article

Autodesk - DelCAM

Featured Video
CAD Systems Administrator for KLA-Tencor at Milpitas, CA
Principal Research Mechatronics Engineer for Verb Surgical at Mountain View, CA
Senior Mechanical Engineer for Verb Surgical at Mountain View, CA
Lead Geospatial Analyst for Alion at McLean, VA
Industrial Designer Intern – Spring 2017 for Nvidia at Santa Clara, CA
Upcoming Events
SOLIDWORKS 2017 Launch Event – Walsall at Village Hotel Club, Walsall, WS2 8TJ Walsall United Kingdom - Mar 30, 2017
PI APPAREL Hong Kong 2017 at SHANGRI-LA KOWLOON 64 Mody Road Tsim Sha Tsui East Kowloon Hong Kong - Apr 5 - 6, 2017
SOLIDWORKS intro and hands on session – Slough at Baylis House, Slough, Berkshire, SL1 3PB Slough United Kingdom - Apr 7, 2017
Engineer 3D! Training + Technology Conference at Hyatt Regency Milwaukee 333 West Kilbourn Avenue Milwaukee WI - Apr 25 - 26, 2017
SolidCAM: Patented Wizard to optimal feeds & speeds

Internet Business Systems © 2017 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise