Teledyne DALSA Introduces New Rad-icon Family of Large Format, High Speed CMOS X-Ray Detectors for Non Destructive Testing

WATERLOO, ONTARIO -- (Marketwired) -- Apr 29, 2014 -- Editors Note: There is a photo associated with this press release.

Teledyne DALSA (NYSE: TDY), a Teledyne Technologies company and global leader in digital X-Ray image sensors, today introduced the first in its new Rad-icon series of CMOS X-Ray cameras.

The Rad-icon 1520 detector features 1548 x 2064 pixel resolution, an active area of 15.3 x 20.4 cm, and 99 micron pixel size. Rad-icon detectors deliver real-time frame rates of up to 30 fps, high sensitivity, and superb resolution in a large area device that is fully integrated and available with a fast, reliable Gigabit Ethernet or Camera Link interface.

The detectors offer a unique combination of higher resolution and fast imaging suitable for industrial x-ray inspection, scientific imaging, and non-destructive testing, including weld inspection, wire bond and printed circuit board (PCB) inspection, microfocus, computed tomography (CT) and other demanding industrial imaging applications.

"The Rad-icon digital x-ray cameras deliver a unique combination of speed, resolution and connectivity," commented Thorsten Achterkirchen, Vice-President, X-Ray Imaging for Teledyne DALSA. "The 1520 is only the beginning of what we are promoting as a cost-effective and flexible platform for high performance digital x-ray imaging for non-destructive testing."

Rad-icon digital x-ray cameras leverage Teledyne DALSA's advanced CMOS image sensing technology that enables the delivery of higher image quality than a-Si flat panels and image intensifier devices.

Other features include:


--  5 lp/mm resolution 
--  Energy range from 10 to 225 kV 
--  14-bit digitization of images 
--  SDKs, drivers and programming support

For additional product information, visit www.teledynedalsa.com/rad-icon.

About Teledyne DALSA's X-Ray Technology

Teledyne DALSA provides unmatched image sensing, capture and processing solutions to medical, dental, scientific and industrial equipment manufacturers. With 30 years of proven capability and innovation, our imaging specialists deliver leading-edge product design. Our manufacturing processes comply with the stringent quality, reliability and traceability requirements of the medical and scientific X-ray community. For more information, visit www.teledynedalsa.com/xray.

About Teledyne DALSA

Teledyne DALSA, a Teledyne Technologies company, is an international leader in high performance digital imaging and semiconductors with approximately 1,000 employees worldwide, headquartered in Waterloo, Ontario, Canada. Established in 1980, the company designs, develops, manufactures and markets digital imaging products and solutions, in addition to providing MEMS products and services. For more information, visit www.teledynedalsa.com.

All trademarks are registered by their respective companies.

Teledyne DALSA reserves the right to make changes at any time without notice.

To view the photo associated with this press release, please visit the following link: www.marketwire.com/library/20140428-radicon800.jpg.

Contacts:
Media Contact:
Teledyne DALSA
Geralyn Miller
+1 (519) 886 6001 ext. 2187

geralyn.miller@teledynedalsa.com

Sales Contact:
Teledyne DALSA X-Ray Imaging
+1 (408) 736 6000

sales.rad-icon@teledynedalsa.com





Review Article Be the first to review this article

Autodesk University 2017

Featured Video
MCAD Corporate Newsletter
rss feed
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
NVIDIA’s AI Computer Drives AVs
Jobs
Senior Mechanical Engineer for Albert Kahn and Associates at Detroit, MI
Mechanical Engineer for The Planate Management Group LLC at Perry Point, MD
Vice President, Transportation Services for Associated General Contractors of New York State at Albany, NY
GIS Software Developer for UDC at Englewood, CO
Structural Engineer for The Planate Management Group LLC at Perry Point, MD
Upcoming Events
ASSESS 2017 CONGRESS at Bolger Center Potomac MD - Nov 1 - 3, 2017
FABTECH 2017 at McCormick Place Chicago IL - Nov 6 - 9, 2017
ATX MINNEAPOLIS 2017 at Minneapolis MN - Nov 8 - 9, 2017
2017 China Chongqing International Machine Tool Show (CCIMT) at Chongqing International Expo Center, Yubei Chongqing China - Nov 13 - 16, 2017
SolidCAM: SolidCARE



Internet Business Systems © 2017 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise