PLDA and OmniPhy Announce PCIe Gen 2 Controller and PHY Combination for the TSMC 28nm Process

PLDA XpressRICH3 PCIe controller and OmniPhy PHY combo provides a complete PCIe Gen 2 interop solution

SAN JOSE, Calif. — (BUSINESS WIRE) — April 7, 2014 — PLDA, the industry leader in PCI Express® IP solutions and OmniPhy, a leading provider of differentiated SerDes IP, today announced successful interop testing for a combined PCIe Gen 2 Controller IP and PHY IP solution. Initially targeting the TSMC 28nm process, the combined PCIe 2.0 Controller/PHY solution can also be ported to additional fabs and processes.

The PLDA XpressRICH3 IP is a high performance, low latency, highly-configurable PCI Express Endpoint, Root port, and Switch IP, compliant to the PCI Express Rev 3.0 specification and backwards-compatible to PCIe GEN2 and PCIe GEN1. It is also available with an industry-standard AMBA AXI4 interface under the version called XpressRICH3-AXI.

OmniPhy is known for its high-end networking technology which includes a long-reach 25Gb/s PHY, and a power-optimized short-reach PHY capable of 28Gb/s with an industry leading mW/Gb ratio. The OmniPhy product optimizes the mix of analog and digital circuit content, leveraging the strength of analog to maintain a low-power footprint, and leveraging digital circuits to drive the world’s most sophisticated calibration and training.

“The combination of the PLDA’s PCIe 2.0 IP with OmniPhy’s SerDes PHY provides a fully integrated PCI Express 2.0 IP solution enabling customers to reduce integration time and speed time-to-market,” stated Stephane Hauradou, CTO for PLDA.

“The OmniPhy SerDes PHY products are silicon-proven for the TSMC 28 nm process and ready to port to additional nodes and processes, making the combined PCIe 2.0/PHY solution the most flexible on the market today,” said Dr. Claude Gauthier, Founder and COO of OmniPhy.

Availability

PLDA XpressRICH3 IP is available now from PLDA. The SerDes PHY IP is available now from OmniPhy.

About PLDA

PLDA designs and sells intellectual property (IP) cores for FPGA and System-on-Chip (SoC) that aim to accelerate time-to-market for embedded electronic designers. PLDA specializes in high-speed interface protocols and technologies such as PCIe, and Ethernet.

PLDA IP cores are provided with a complete set of tools, including FPGA prototyping cards, drivers and APIs, testbenches and benefit from a global support and sales organization able to sustain over 2,000 ASIC customers worldwide.

PLDA is a global company with offices in North America (San Jose, California) and in Europe (France, Italy and Bulgaria). For more information visit www.plda.com.

About OmniPhy

OmniPhy is a leading provider of differentiated interface IP, offering customers greater design margins and fast time-to-market for emerging standards, including 15-28Gb/s PHY designs. The company focuses on power and performance, yield, and testability - offering best-in-class silicon-proven IP in the most advanced technologies.

Founded by industry veterans in response to market demand. The team has over 200 years of cumulative experience bringing SerDes IP to production across a wide range of markets and process nodes. For more information, visit www.omniphysemi.com.

Trademarks

All registered trademarks and other trademarks belong to their respective owners.



Contact:

PLDA
Michelle Tang, +1 408-273-4528
Email Contact
or
OmniPhy
Claude Gautier, +1 408-300-9050
Email Contact




Review Article Be the first to review this article
IMTS 2018 Register Now>>

Featured Video
Jobs
GIS Specialist for Metro Wastewater Reclamation District at Denver, Colorado
Upcoming Events
34th Annual Coordinate Metrology Society Conference 2018 at Grand Sierra Resort, 2500 East Second Street Meeting & Covention Center Reno NV - Jul 23 - 27, 2018
Design of Experiments (DOE) for Process Development and Validation (NTZ) 2018 at DoubleTree by Hilton San Diego Downtown 1646 Front St San Diego CA - Aug 2 - 3, 2018
FARO Measure And Inspect 2018 at Maple Hotel Bangkok Thailand - Aug 8, 2018
COMSOL Conference 2018 Bangalore at ITC Gardenia 1, Residency Road, Shanthala Nagar, Ashok Nagar, Bengaluru, Karnataka India - Aug 9 - 10, 2018
Kenesto: 30 day trial
MasterCAM



Internet Business Systems © 2018 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise