IEC ELECTRONICS CORP. FIRST TO EARN CERTIFICATION AS QUALIFIED MANUFACTURER TO IPC J-STD-001/IPC-A-610

Recognized as IPC-Trusted Source and QML-Listed

BANNOCKBURN, Ill., USA, March 20, 2014 — IPC’s Validation Services Program has awarded the first IPC J-STD-001/IPC-A-610 Qualified Manufacturers Listing (QML) to IEC Electronics Corporation’s Newark, New York and Albuquerque, New Mexico, facilities. In addition, IEC Electronics’ testing laboratory, Dynamic Research and Testing Laboratories (DRTL) in Albuquerque has been certified as an IPC-approved Validation Services Test Laboratory.

IPC President and CEO John Mitchell will present certificates to IEC Electronics during the Opening Keynote Session at IPC APEX EXPO® on Tuesday, March 25, 2014, at Mandalay Bay Convention Center in Las Vegas.

“IEC Electronics is honored to be the first company certified under the IPC QML Validation Program. This certification recognizes consistency in our global footprint, and identifies the level of our product quality for our customers throughout our supply chain. This certification serves as a testament to IEC’s excellence in electronics assembly, and builds critical awareness of the level of quality needed in the EMS community,” said Mark Northrup, vice president of technical operations and strategy at IEC Electronics Corp.

IEC Electronics’ Newark and Albuquerque facilities were the first sites to undergo IPC’s Validation Services assessment/audit which is based on IPC J-STD-001, Requirements for Soldered Electrical and Electronic Assemblies and IPC-A-610, Acceptability of Electronic Assemblies Class 3 requirements. The company will be listed as an IPC-trusted source on IPC’s online QML.

IEC Electronics is among the first companies to participate in IPC’s new Validations Services QPL/QML Program which was launched in 2013. Developed to promote supply chain verification, the program provides auditing and certification of electronics companies’ products and processes which conform to IPC standards.

“Different from other audit programs, IPC’s Validation Services Program uniquely provides technical and in-depth assessments of products and processes in accordance with IPC standards,” said Randy Cherry, IPC director of Validation Services. “We are pleased to recognize IEC Electronics as the first member of IPC’s network of trusted QML suppliers.”

About IPC

IPC ( www.IPC.org) is a global industry association based in Bannockburn, Ill., dedicated to the competitive excellence and financial success of its 3,400 member companies which represent all facets of the electronics industry, including design, printed board manufacturing, electronics assembly and test. As a member-driven organization and leading source for industry standards, training, market research and public policy advocacy, IPC supports programs to meet the needs of an estimated $2 trillion global electronics industry. IPC maintains additional offices in Taos, N.M.; Washington, D.C.; Stockholm, Sweden; Moscow, Russia; Bangalore, India; Bangkok, Thailand; and Shanghai, Shenzhen, Chengdu, Suzhou and Beijing, China.

About IEC Electronics         

IEC Electronics Corporation (www.iec-electronics.com) is a premier provider of electronic manufacturing services (“EMS”) to advanced technology companies primarily in the military and aerospace, medical, industrial and communications sectors.  The Company specializes in the custom manufacture of high reliability, complex circuit cards, system level assemblies, a wide array of custom cable and wire harness assemblies, precision sheet metal products, and advanced research and testing services. As a full service EMS provider, IEC is ISO 9001:2008, AS9100 and ISO13485 certified, Nadcap accredited and an approved NSA supplier under the COMSEC standard. Dynamic Research and Testing Laboratories (DRTL), the Company’s newest business unit, is an ISO 17025 accredited laboratory specializing in component risk mitigation and advanced failure analysis. IEC Electronics is headquartered in Newark, NY (outside of Rochester) and also has operations in Rochester, NY, Albuquerque, NM and Bell Gardens, CA. 



Contact:

Randy Cherry
+1 847-597-2806

Anna Garrido,
Director of Marketing and Communications
IPC
+1 847-597-2804 or
Email Contact




Review Article Be the first to review this article
Rand3D

Featured Video
Jobs
Mechanical Engineer I for Air Techniques, Inc at Melville, NY
Proposal Support Coordinator for Keystone Aerial Surveys at Philadelphia, PA
Upcoming Events
The Rise of Mechatronics at Dassault Systèmes San Diego 5005 Wateridge Vista Drive San Diego CA - Sep 12, 2017
The Rise of Mechatronics at Buca di Beppo - Pasadena 80 West Green Street Pasadena CA - Sep 13, 2017
The Rise of Mechatronics at Dassault Systèmes Santa Clara 3979 Freedom Circle, Ste 750 Santa Clara CA - Sep 14, 2017
The 30th Annual Integrated Process Excellence Symposium & Training at Wyndham Grand Bonnet Creek Resort Orlando FL - Sep 18 - 20, 2017
Kenesto: 30 day trial



Internet Business Systems © 2017 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise