TI adds 12 high-performance, high-resolution, ultra-low-power SAR ADCs to lineup

New ADC family includes six reference designs to jump-start design for industrial and medical applications

DALLAS, Jan. 27, 2014 — (PRNewswire) —  Texas Instruments (TI) (NASDAQ: TXN) today expanded its SAR (successive approximation register) analog-to-digital converter (ADC) product portfolio with a new family of 12 devices that provide the industry's widest analog supply and common-mode voltage ranges. The 1-channel ADS8881 family includes high-performance, ultra-low power 18- and 16-bit SAR ADCs with speed options ranging from 100 kSPS to 1 MSPS. Engineers can chose the right ADC for their designs in a wide variety of applications – from high-end industrial, such as high-performance test and measurement equipment, precision metrology and precision sensor transmitters for industrial automation, to battery-operated test and measurement and portable medical. For more information about the ADS8881 family, visit www.ti.com/ads8881-pr.

Key benefits of the ADS8881 family:

  • Widest input common mode: Most of the new ADCs provide an input common-mode range that is 20x wider than other devices. This simplifies signal conditioning and enables system designers to more easily digitize the difference between two independent sensor signals with widely varying common-mode voltage values over time.
  • Flexible analog and digital supply voltage ranges: Features an analog supply voltage range of 2.7 V to 3.6 V, three times wider than existing devices. This enables direct operation from a Lithium-Ion battery. Also, with an even wider digital supply voltage range of 1.65 V to 3.6 V, the ADCs meet most microprocessor supply requirements.
  • Ultra-low power: The 1-MSPS SAR ADCs consume only 5.5 mW of power at 1 MSPS and 55 uW at 10 kSPS, making them suitable for pulsed DC measurements in portable medical and heat-sensitive automated test applications.
  • Large pin-compatible family: All 12 devices are pin-compatible and available in both MSOP and QFN package options, enabling engineers to reuse the same analog signal chain design across their products with minimal, if any, redesign.

Tools and support to jump-start design
TI offers a range of support tools for the ADS8881 family to speed time to market, including reference designs, simulation models and hardware evaluation kits.

The following TI Precision Designs reference design circuits provide theory, simulation, calculation, design methodology and more.

The ADS8881EVM-PDK, ADS8861EVM-PDK and ADS8860EVM-PDK performance development kits may be purchased for US$199. The kits enable system designers to quickly evaluate and test device performance using only the provided hardware and TI's ADCPro™ software tool.  

IBIS and TINA-TI™ models are also available for the ADS8881 family to optimize front-end signal conditioning circuitry in software simulation.

Support is available on the Precision Converters Forum in the TI E2E™ Community, where engineers can search for solutions, get help, share knowledge and solve problems with fellow engineers and TI experts.

Package, availability and pricing
The ADC8881 family is available today in the following 10-pin, 3-mm by 4.9-mm MSOP and 3-mm by 3-mm QFN options:

Device

Resolution

Sample rate

Signal-to-noise ratio (SNR)

Signal-to-noise + distortion (SINAD)

Price (1,000 units)

ADS8881

18

1 MSPS

100

99.9

$US19.95

ADS8883

18

680 kSPS

100

99.9

$US14.95

ADS8885

18

400 kSPS

100

99.99

$US10.95

ADS8887

18

100 kSPS

100

99.99

$US7.95

ADS8861

16

1 MSPS

96

95.9

$US11.00

ADS8863

16

680 kSPS

96

95.9

$US9.00

ADS8865

16

400 kSPS

96

95.9

$US7.50

ADS8867

16

100 kSPS

96

95.5

$US5.50

ADS8860

16

1 MSPS

93

92.8

$US10.00

ADS8862

16

680 kSPS

93

92.8

$US8.00

ADS8864

16

400 kSPS

93

92.8

$US6.50

ADS8866

16

100 kSPS

93

92.8

$US5.00


1 | 2  Next Page »



Review Article Be the first to review this article
SolidCAM: 10K CAM Contest

Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
GE Additive’s Big Plans For Metal AM
Jobs
ECAD Designer - Data Connectivity for Delphi at Auburn Hills, MI
Mechanical Engineer II - Requisition ID 090445 for L3 Technologies at New York, NY
Estimator / Bidder for Rulon International at Saint Augustine, FL
Upcoming Events
33rd Annual Coordinate Metrology Society Conference at Snowbird UT - Jul 17 - 21, 2017
EMO Hannover 2017 at Hannover Germany - Sep 18 - 23, 2017
The 30th Annual Integrated Process Excellence Symposium & Training at Wyndham Grand Bonnet Creek Resort Orlando FL - Sep 18 - 20, 2017
Additive Manufacturing Conference 2017 at Knoxville Convention Center 701 Henley Street Knoxville TN - Oct 10 - 12, 2017



Internet Business Systems © 2017 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise